Skip to content

L
linux
Commit a8ee3b32 authored by Gwendal Grignou's avatar Gwendal Grignou Committed by Jonathan Cameron
Browse files
Options

iio:proximity:sx9324: Add dt_binding support 

Based on bindings/iio/proximity/semtech,sx9324.yaml, implement
retrieving sensor hardware property and alter default values.
Signed-off-by: default avatarGwendal Grignou <gwendal@chromium.org>
Reviewed-by: default avatarStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20220101203817.290512-6-gwendal@chromium.orgSigned-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 656f8070
Hide whitespace changes
Inline Side-by-side
Showing with 164 additions and 0 deletions
drivers/iio/proximity/sx9324.c
View file @ a8ee3b32
......@@ -77,6 +77,7 @@
#define SX9324_REG_PROX_CTRL0 0x30
#define SX9324_REG_PROX_CTRL0_GAIN_MASK GENMASK(5, 3)
#define SX9324_REG_PROX_CTRL0_GAIN_1 0x80
#define SX9324_REG_PROX_CTRL0_RAWFILT_MASK GENMASK(2, 0)
#define SX9324_REG_PROX_CTRL0_RAWFILT_1P50 0x01
#define SX9324_REG_PROX_CTRL1 0x31
#define SX9324_REG_PROX_CTRL2 0x32
......@@ -753,6 +754,74 @@ static int sx9324_write_raw(struct iio_dev *indio_dev,
}
}
static const struct sx_common_reg_default sx9324_default_regs[] = {
{ SX9324_REG_IRQ_MSK, 0x00 },
{ SX9324_REG_IRQ_CFG0, 0x00 },
{ SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND },
{ SX9324_REG_IRQ_CFG2, 0x00 },
{ SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS },
/*
* The lower 4 bits should not be set as it enable sensors measurements.
* Turning the detection on before the configuration values are set to
* good values can cause the device to return erroneous readings.
*/
{ SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL },
{ SX9324_REG_AFE_CTRL0, 0x00 },
{ SX9324_REG_AFE_CTRL3, 0x00 },
{ SX9324_REG_AFE_CTRL4, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
SX9324_REG_AFE_CTRL4_RES_100 },
{ SX9324_REG_AFE_CTRL6, 0x00 },
{ SX9324_REG_AFE_CTRL7, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
SX9324_REG_AFE_CTRL4_RES_100 },
/* TODO(gwendal): PHx use chip default or all grounded? */
{ SX9324_REG_AFE_PH0, 0x29 },
{ SX9324_REG_AFE_PH1, 0x26 },
{ SX9324_REG_AFE_PH2, 0x1a },
{ SX9324_REG_AFE_PH3, 0x16 },
{ SX9324_REG_AFE_CTRL8, SX9324_REG_AFE_CTRL8_RESFILTN_4KOHM },
{ SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1 },
{ SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL0_GAIN_1 |
SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
{ SX9324_REG_PROX_CTRL1, SX9324_REG_PROX_CTRL0_GAIN_1 |
SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
{ SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K },
{ SX9324_REG_PROX_CTRL3, SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES |
SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K },
{ SX9324_REG_PROX_CTRL4, SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 |
SX9324_REG_PROX_CTRL3_AVGPOS_FILT_256 },
{ SX9324_REG_PROX_CTRL5, 0x00 },
{ SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
{ SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
{ SX9324_REG_ADV_CTRL0, 0x00 },
{ SX9324_REG_ADV_CTRL1, 0x00 },
{ SX9324_REG_ADV_CTRL2, 0x00 },
{ SX9324_REG_ADV_CTRL3, 0x00 },
{ SX9324_REG_ADV_CTRL4, 0x00 },
{ SX9324_REG_ADV_CTRL5, SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 |
SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 },
{ SX9324_REG_ADV_CTRL6, 0x00 },
{ SX9324_REG_ADV_CTRL7, 0x00 },
{ SX9324_REG_ADV_CTRL8, 0x00 },
{ SX9324_REG_ADV_CTRL9, 0x00 },
/* Body/Table threshold */
{ SX9324_REG_ADV_CTRL10, 0x00 },
{ SX9324_REG_ADV_CTRL11, 0x00 },
{ SX9324_REG_ADV_CTRL12, 0x00 },
/* TODO(gwendal): SAR currenly disabled */
{ SX9324_REG_ADV_CTRL13, 0x00 },
{ SX9324_REG_ADV_CTRL14, 0x00 },
{ SX9324_REG_ADV_CTRL15, 0x00 },
{ SX9324_REG_ADV_CTRL16, 0x00 },
{ SX9324_REG_ADV_CTRL17, 0x00 },
{ SX9324_REG_ADV_CTRL18, 0x00 },
{ SX9324_REG_ADV_CTRL19, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
{ SX9324_REG_ADV_CTRL20, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
};
/* Activate all channels and perform an initial compensation. */
static int sx9324_init_compensation(struct iio_dev *indio_dev)
{
......@@ -772,6 +841,99 @@ static int sx9324_init_compensation(struct iio_dev *indio_dev)
20000, 2000000);
}
static const struct sx_common_reg_default *
sx9324_get_default_reg(struct device *dev, int idx,
struct sx_common_reg_default *reg_def)
{
#define SX9324_PIN_DEF "semtech,ph0-pin"
#define SX9324_RESOLUTION_DEF "semtech,ph01-resolution"
#define SX9324_PROXRAW_DEF "semtech,ph01-proxraw-strength"
unsigned int pin_defs[SX9324_NUM_PINS];
char prop[] = SX9324_PROXRAW_DEF;
u32 start = 0, raw = 0, pos = 0;
int ret, count, ph, pin;
memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def));
switch (reg_def->reg) {
case SX9324_REG_AFE_PH0:
case SX9324_REG_AFE_PH1:
case SX9324_REG_AFE_PH2:
case SX9324_REG_AFE_PH3:
ph = reg_def->reg - SX9324_REG_AFE_PH0;
scnprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph);
count = device_property_count_u32(dev, prop);
if (count != ARRAY_SIZE(pin_defs))
break;
ret = device_property_read_u32_array(dev, prop, pin_defs,
ARRAY_SIZE(pin_defs));
for (pin = 0; pin < SX9324_NUM_PINS; pin++)
raw |= (pin_defs[pin] << (2 * pin)) &
SX9324_REG_AFE_PH0_PIN_MASK(pin);
reg_def->def = raw;
break;
case SX9324_REG_AFE_CTRL4:
case SX9324_REG_AFE_CTRL7:
if (reg_def->reg == SX9324_REG_AFE_CTRL4)
strncpy(prop, "semtech,ph01-resolution",
ARRAY_SIZE(prop));
else
strncpy(prop, "semtech,ph23-resolution",
ARRAY_SIZE(prop));
ret = device_property_read_u32(dev, prop, &raw);
if (ret)
break;
raw = ilog2(raw) - 3;
reg_def->def &= ~SX9324_REG_AFE_CTRL4_RESOLUTION_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL4_RESOLUTION_MASK,
raw);
break;
case SX9324_REG_ADV_CTRL5:
ret = device_property_read_u32(dev, "semtech,startup-sensor",
&start);
if (ret)
break;
reg_def->def &= ~SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK,
start);
break;
case SX9324_REG_PROX_CTRL4:
ret = device_property_read_u32(dev, "semtech,avg-pos-strength",
&pos);
if (ret)
break;
/* Powers of 2, except for a gap between 16 and 64 */
raw = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3);
reg_def->def &= ~SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK,
raw);
break;
case SX9324_REG_PROX_CTRL0:
case SX9324_REG_PROX_CTRL1:
if (reg_def->reg == SX9324_REG_PROX_CTRL0)
strncpy(prop, "semtech,ph01-proxraw-strength",
ARRAY_SIZE(prop));
else
strncpy(prop, "semtech,ph23-proxraw-strength",
ARRAY_SIZE(prop));
ret = device_property_read_u32(dev, prop, &raw);
if (ret)
break;
reg_def->def &= ~SX9324_REG_PROX_CTRL0_RAWFILT_MASK;
reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL0_RAWFILT_MASK,
raw);
break;
}
return reg_def;
}
static int sx9324_check_whoami(struct device *dev,
struct iio_dev *indio_dev)
{
......@@ -792,12 +954,14 @@ static const struct sx_common_chip_info sx9324_chip_info = {
.mask_enable_chan = SX9324_REG_GNRL_CTRL1_PHEN_MASK,
.irq_msk_offset = 3,
.num_channels = SX9324_NUM_CHANNELS,
.num_default_regs = ARRAY_SIZE(sx9324_default_regs),
.ops = {
.read_prox_data = sx9324_read_prox_data,
.check_whoami = sx9324_check_whoami,
.init_compensation = sx9324_init_compensation,
.wait_for_sample = sx9324_wait_for_sample,
.get_default_reg = sx9324_get_default_reg,
},
.iio_channels = sx9324_channels,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7