Commit a941e2fa authored by Kirill Marinushkin's avatar Kirill Marinushkin Committed by Mark Brown

ASoC: topology: Fix bclk and fsync inversion in set_link_hw_format()

The values of bclk and fsync are inverted WRT the codec. But the existing
solution already works for Broadwell, see the alsa-lib config:

`alsa-lib/src/conf/topology/broadwell/broadwell.conf`

This commit provides the backwards-compatible solution to fix this misuse.
Signed-off-by: default avatarKirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: default avatarPan Xiuli <xiuli.pan@linux.intel.com>
Tested-by: default avatarPierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 8a2278b7
...@@ -160,6 +160,18 @@ ...@@ -160,6 +160,18 @@
#define SND_SOC_TPLG_LNK_FLGBIT_SYMMETRIC_SAMPLEBITS (1 << 2) #define SND_SOC_TPLG_LNK_FLGBIT_SYMMETRIC_SAMPLEBITS (1 << 2)
#define SND_SOC_TPLG_LNK_FLGBIT_VOICE_WAKEUP (1 << 3) #define SND_SOC_TPLG_LNK_FLGBIT_VOICE_WAKEUP (1 << 3)
/* DAI topology BCLK parameter
* For the backwards capability, by default codec is bclk master
*/
#define SND_SOC_TPLG_BCLK_CM 0 /* codec is bclk master */
#define SND_SOC_TPLG_BCLK_CS 1 /* codec is bclk slave */
/* DAI topology FSYNC parameter
* For the backwards capability, by default codec is fsync master
*/
#define SND_SOC_TPLG_FSYNC_CM 0 /* codec is fsync master */
#define SND_SOC_TPLG_FSYNC_CS 1 /* codec is fsync slave */
/* /*
* Block Header. * Block Header.
* This header precedes all object and object arrays below. * This header precedes all object and object arrays below.
...@@ -315,8 +327,8 @@ struct snd_soc_tplg_hw_config { ...@@ -315,8 +327,8 @@ struct snd_soc_tplg_hw_config {
__u8 clock_gated; /* 1 if clock can be gated to save power */ __u8 clock_gated; /* 1 if clock can be gated to save power */
__u8 invert_bclk; /* 1 for inverted BCLK, 0 for normal */ __u8 invert_bclk; /* 1 for inverted BCLK, 0 for normal */
__u8 invert_fsync; /* 1 for inverted frame clock, 0 for normal */ __u8 invert_fsync; /* 1 for inverted frame clock, 0 for normal */
__u8 bclk_master; /* 1 for master of BCLK, 0 for slave */ __u8 bclk_master; /* SND_SOC_TPLG_BCLK_ value */
__u8 fsync_master; /* 1 for master of FSYNC, 0 for slave */ __u8 fsync_master; /* SND_SOC_TPLG_FSYNC_ value */
__u8 mclk_direction; /* 0 for input, 1 for output */ __u8 mclk_direction; /* 0 for input, 1 for output */
__le16 reserved; /* for 32bit alignment */ __le16 reserved; /* for 32bit alignment */
__le32 mclk_rate; /* MCLK or SYSCLK freqency in Hz */ __le32 mclk_rate; /* MCLK or SYSCLK freqency in Hz */
......
...@@ -2019,13 +2019,15 @@ static void set_link_hw_format(struct snd_soc_dai_link *link, ...@@ -2019,13 +2019,15 @@ static void set_link_hw_format(struct snd_soc_dai_link *link,
link->dai_fmt |= SND_SOC_DAIFMT_IB_IF; link->dai_fmt |= SND_SOC_DAIFMT_IB_IF;
/* clock masters */ /* clock masters */
bclk_master = hw_config->bclk_master; bclk_master = (hw_config->bclk_master ==
fsync_master = hw_config->fsync_master; SND_SOC_TPLG_BCLK_CM);
if (!bclk_master && !fsync_master) fsync_master = (hw_config->fsync_master ==
SND_SOC_TPLG_FSYNC_CM);
if (bclk_master && fsync_master)
link->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM; link->dai_fmt |= SND_SOC_DAIFMT_CBM_CFM;
else if (bclk_master && !fsync_master)
link->dai_fmt |= SND_SOC_DAIFMT_CBS_CFM;
else if (!bclk_master && fsync_master) else if (!bclk_master && fsync_master)
link->dai_fmt |= SND_SOC_DAIFMT_CBS_CFM;
else if (bclk_master && !fsync_master)
link->dai_fmt |= SND_SOC_DAIFMT_CBM_CFS; link->dai_fmt |= SND_SOC_DAIFMT_CBM_CFS;
else else
link->dai_fmt |= SND_SOC_DAIFMT_CBS_CFS; link->dai_fmt |= SND_SOC_DAIFMT_CBS_CFS;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment