net: phy: marvell: add support for Amethyst internal PHY

Add support for Amethyst internal PHY.

The only difference from Peridot is HWMON.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell.c

@@ -118,10 +118,21 @@
 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE_ONESHOT	(0x2 << 14)
 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_DISABLE		(0x3 << 14)
 #define MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK			(0x3 << 14)
+#define MII_88E6393_MISC_TEST_SAMPLES_2048	(0x0 << 11)
+#define MII_88E6393_MISC_TEST_SAMPLES_4096	(0x1 << 11)
+#define MII_88E6393_MISC_TEST_SAMPLES_8192	(0x2 << 11)
+#define MII_88E6393_MISC_TEST_SAMPLES_16384	(0x3 << 11)
+#define MII_88E6393_MISC_TEST_SAMPLES_MASK	(0x3 << 11)
+#define MII_88E6393_MISC_TEST_RATE_2_3MS	(0x5 << 8)
+#define MII_88E6393_MISC_TEST_RATE_6_4MS	(0x6 << 8)
+#define MII_88E6393_MISC_TEST_RATE_11_9MS	(0x7 << 8)
+#define MII_88E6393_MISC_TEST_RATE_MASK		(0x7 << 8)
 
 #define MII_88E6390_TEMP_SENSOR		0x1c
-#define MII_88E6390_TEMP_SENSOR_MASK	0xff
-#define MII_88E6390_TEMP_SENSOR_SAMPLES 10
+#define MII_88E6393_TEMP_SENSOR_THRESHOLD_MASK	0xff00
+#define MII_88E6393_TEMP_SENSOR_THRESHOLD_SHIFT	8
+#define MII_88E6390_TEMP_SENSOR_MASK		0xff
+#define MII_88E6390_TEMP_SENSOR_SAMPLES		10
 
 #define MII_88E1318S_PHY_MSCR1_REG	16
 #define MII_88E1318S_PHY_MSCR1_PAD_ODD	BIT(6)
@@ -2217,6 +2228,7 @@ static int marvell_vct7_cable_test_get_status(struct phy_device *phydev,
 
 #ifdef CONFIG_HWMON
 struct marvell_hwmon_ops {
+	int (*config)(struct phy_device *phydev);
 	int (*get_temp)(struct phy_device *phydev, long *temp);
 	int (*get_temp_critical)(struct phy_device *phydev, long *temp);
 	int (*set_temp_critical)(struct phy_device *phydev, long temp);
@@ -2391,6 +2403,65 @@ static int m88e6390_get_temp(struct phy_device *phydev, long *temp)
 	return ret;
 }
 
+static int m88e6393_get_temp(struct phy_device *phydev, long *temp)
+{
+	int err;
+
+	err = m88e1510_get_temp(phydev, temp);
+
+	/* 88E1510 measures T + 25, while the PHY on 88E6393X switch
+	 * T + 75, so we have to subtract another 50
+	 */
+	*temp -= 50000;
+
+	return err;
+}
+
+static int m88e6393_get_temp_critical(struct phy_device *phydev, long *temp)
+{
+	int ret;
+
+	*temp = 0;
+
+	ret = phy_read_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
+			     MII_88E6390_TEMP_SENSOR);
+	if (ret < 0)
+		return ret;
+
+	*temp = (((ret & MII_88E6393_TEMP_SENSOR_THRESHOLD_MASK) >>
+		  MII_88E6393_TEMP_SENSOR_THRESHOLD_SHIFT) - 75) * 1000;
+
+	return 0;
+}
+
+static int m88e6393_set_temp_critical(struct phy_device *phydev, long temp)
+{
+	temp = (temp / 1000) + 75;
+
+	return phy_modify_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
+				MII_88E6390_TEMP_SENSOR,
+				MII_88E6393_TEMP_SENSOR_THRESHOLD_MASK,
+				temp << MII_88E6393_TEMP_SENSOR_THRESHOLD_SHIFT);
+}
+
+static int m88e6393_hwmon_config(struct phy_device *phydev)
+{
+	int err;
+
+	err = m88e6393_set_temp_critical(phydev, 100000);
+	if (err)
+		return err;
+
+	return phy_modify_paged(phydev, MII_MARVELL_MISC_TEST_PAGE,
+				MII_88E6390_MISC_TEST,
+				MII_88E6390_MISC_TEST_TEMP_SENSOR_MASK |
+				MII_88E6393_MISC_TEST_SAMPLES_MASK |
+				MII_88E6393_MISC_TEST_RATE_MASK,
+				MII_88E6390_MISC_TEST_TEMP_SENSOR_ENABLE |
+				MII_88E6393_MISC_TEST_SAMPLES_2048 |
+				MII_88E6393_MISC_TEST_RATE_2_3MS);
+}
+
 static int marvell_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
 			      u32 attr, int channel, long *temp)
 {
@@ -2535,8 +2606,13 @@ static int marvell_hwmon_probe(struct phy_device *phydev)
 
 	priv->hwmon_dev = devm_hwmon_device_register_with_info(
 		dev, priv->hwmon_name, phydev, &marvell_hwmon_chip_info, NULL);
+	if (IS_ERR(priv->hwmon_dev))
+		return PTR_ERR(priv->hwmon_dev);
 
-	return PTR_ERR_OR_ZERO(priv->hwmon_dev);
+	if (ops->config)
+		err = ops->config(phydev);
+
+	return err;
 }
 
 static const struct marvell_hwmon_ops m88e1121_hwmon_ops = {
@@ -2554,6 +2630,14 @@ static const struct marvell_hwmon_ops m88e6390_hwmon_ops = {
 	.get_temp = m88e6390_get_temp,
 };
 
+static const struct marvell_hwmon_ops m88e6393_hwmon_ops = {
+	.config = m88e6393_hwmon_config,
+	.get_temp = m88e6393_get_temp,
+	.get_temp_critical = m88e6393_get_temp_critical,
+	.set_temp_critical = m88e6393_set_temp_critical,
+	.get_temp_alarm = m88e1510_get_temp_alarm,
+};
+
 #define DEF_MARVELL_HWMON_OPS(s) (&(s))
 
 #else
@@ -2948,6 +3032,32 @@ static struct phy_driver marvell_drivers[] = {
 		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
 		.cable_test_get_status = marvell_vct7_cable_test_get_status,
 	},
+	{
+		.phy_id = MARVELL_PHY_ID_88E6393_FAMILY,
+		.phy_id_mask = MARVELL_PHY_ID_MASK,
+		.name = "Marvell 88E6393 Family",
+		.driver_data = DEF_MARVELL_HWMON_OPS(m88e6393_hwmon_ops),
+		/* PHY_GBIT_FEATURES */
+		.flags = PHY_POLL_CABLE_TEST,
+		.probe = marvell_probe,
+		.config_init = marvell_config_init,
+		.config_aneg = m88e1510_config_aneg,
+		.read_status = marvell_read_status,
+		.config_intr = marvell_config_intr,
+		.handle_interrupt = marvell_handle_interrupt,
+		.resume = genphy_resume,
+		.suspend = genphy_suspend,
+		.read_page = marvell_read_page,
+		.write_page = marvell_write_page,
+		.get_sset_count = marvell_get_sset_count,
+		.get_strings = marvell_get_strings,
+		.get_stats = marvell_get_stats,
+		.get_tunable = m88e1540_get_tunable,
+		.set_tunable = m88e1540_set_tunable,
+		.cable_test_start = marvell_vct7_cable_test_start,
+		.cable_test_tdr_start = marvell_vct5_cable_test_tdr_start,
+		.cable_test_get_status = marvell_vct7_cable_test_get_status,
+	},
 	{
 		.phy_id = MARVELL_PHY_ID_88E1340S,
 		.phy_id_mask = MARVELL_PHY_ID_MASK,
@@ -3014,6 +3124,7 @@ static struct mdio_device_id __maybe_unused marvell_tbl[] = {
 	{ MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E6341_FAMILY, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E6390_FAMILY, MARVELL_PHY_ID_MASK },
+	{ MARVELL_PHY_ID_88E6393_FAMILY, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E1340S, MARVELL_PHY_ID_MASK },
 	{ MARVELL_PHY_ID_88E1548P, MARVELL_PHY_ID_MASK },
 	{ }

include/linux/marvell_phy.h

@@ -39,6 +39,7 @@
  */
 #define MARVELL_PHY_ID_88E6341_FAMILY	0x01410f41
 #define MARVELL_PHY_ID_88E6390_FAMILY	0x01410f90
+#define MARVELL_PHY_ID_88E6393_FAMILY	0x002b0b9b
 
 #define MARVELL_PHY_FAMILY_ID(id)	((id) >> 4)