pinctrl: as3722: fix handling of GPIO invert bit

commit a73d2e30 upstream.

The AS3722_GPIO_INV bit will always be blindly overwritten by
as3722_pinctrl_gpio_set_direction() and will be ignored when
setting the value of the GPIO in as3722_gpio_set() since the
enable_gpio_invert flag is never set.  This will cause an
initially inverted GPIO to toggle when requested as an output,
which could be problematic if, for example, the GPIO controls
a critical regulator.

Instead of setting up the enable_gpio_invert flag, just leave
the invert bit alone and check it before setting the GPIO value.
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/pinctrl/pinctrl-as3722.c

@@ -64,7 +64,6 @@ struct as3722_pin_function {
 };
 
 struct as3722_gpio_pin_control {
-	bool enable_gpio_invert;
 	unsigned mode_prop;
 	int io_function;
 };
@@ -320,10 +319,8 @@ static int as3722_pinctrl_gpio_set_direction(struct pinctrl_dev *pctldev,
 		return mode;
 	}
 
-	if (as_pci->gpio_control[offset].enable_gpio_invert)
-		mode |= AS3722_GPIO_INV;
-
-	return as3722_write(as3722, AS3722_GPIOn_CONTROL_REG(offset), mode);
+	return as3722_update_bits(as3722, AS3722_GPIOn_CONTROL_REG(offset),
+				AS3722_GPIO_MODE_MASK, mode);
 }
 
 static const struct pinmux_ops as3722_pinmux_ops = {
@@ -496,10 +493,18 @@ static void as3722_gpio_set(struct gpio_chip *chip, unsigned offset,
 {
 	struct as3722_pctrl_info *as_pci = to_as_pci(chip);
 	struct as3722 *as3722 = as_pci->as3722;
-	int en_invert = as_pci->gpio_control[offset].enable_gpio_invert;
+	int en_invert;
 	u32 val;
 	int ret;
 
+	ret = as3722_read(as3722, AS3722_GPIOn_CONTROL_REG(offset), &val);
+	if (ret < 0) {
+		dev_err(as_pci->dev,
+			"GPIO_CONTROL%d_REG read failed: %d\n", offset, ret);
+		return;
+	}
+	en_invert = !!(val & AS3722_GPIO_INV);
+
 	if (value)
 		val = (en_invert) ? 0 : AS3722_GPIOn_SIGNAL(offset);
 	else