Merge tag 'fixes-for-v4.3-rc2' of...

Merge tag 'fixes-for-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.3-rc2

First series of fixes for v4.3-rc cycle. The major points are
a fix to a regression which would let gadget driver disable
an endpoint that's already disabled and a fix to MUSB to make
sure IRQs are masked when we're going to suspend and unmasked
on resume.
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc3/dwc3-omap.c

@@ -514,8 +514,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		goto err1;
 	}
 
-	dwc3_omap_enable_irqs(omap);
-
 	ret = dwc3_omap_extcon_register(omap);
 	if (ret < 0)
 		goto err2;
@@ -526,6 +524,8 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
+	dwc3_omap_enable_irqs(omap);
+
 	return 0;
 
 err3:

drivers/usb/gadget/epautoconf.c

@@ -186,6 +186,7 @@ void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
 
 	list_for_each_entry (ep, &gadget->ep_list, ep_list) {
 		ep->claimed = false;
+		ep->driver_data = NULL;
 	}
 	gadget->in_epnum = 0;
 	gadget->out_epnum = 0;

drivers/usb/gadget/udc/amd5536udc.c

@@ -3138,8 +3138,8 @@ static void udc_pci_remove(struct pci_dev *pdev)
 	writel(AMD_BIT(UDC_DEVCFG_SOFTRESET), &dev->regs->cfg);
 	if (dev->irq_registered)
 		free_irq(pdev->irq, dev);
-	if (dev->regs)
-		iounmap(dev->regs);
+	if (dev->virt_addr)
+		iounmap(dev->virt_addr);
 	if (dev->mem_region)
 		release_mem_region(pci_resource_start(pdev, 0),
 				pci_resource_len(pdev, 0));
@@ -3226,17 +3226,13 @@ static int udc_pci_probe(
 
 	/* init */
 	dev = kzalloc(sizeof(struct udc), GFP_KERNEL);
-	if (!dev) {
-		retval = -ENOMEM;
-		goto finished;
-	}
+	if (!dev)
+		return -ENOMEM;
 
 	/* pci setup */
 	if (pci_enable_device(pdev) < 0) {
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_pcidev;
 	}
 	dev->active = 1;
 
@@ -3246,28 +3242,22 @@ static int udc_pci_probe(
 
 	if (!request_mem_region(resource, len, name)) {
 		dev_dbg(&pdev->dev, "pci device used already\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_memreg;
 	}
 	dev->mem_region = 1;
 
 	dev->virt_addr = ioremap_nocache(resource, len);
 	if (dev->virt_addr == NULL) {
 		dev_dbg(&pdev->dev, "start address cannot be mapped\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -EFAULT;
-		goto finished;
+		goto err_ioremap;
 	}
 
 	if (!pdev->irq) {
 		dev_err(&pdev->dev, "irq not set\n");
-		kfree(dev);
-		dev = NULL;
 		retval = -ENODEV;
-		goto finished;
+		goto err_irq;
 	}
 
 	spin_lock_init(&dev->lock);
@@ -3283,10 +3273,8 @@ static int udc_pci_probe(
 
 	if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
 		dev_dbg(&pdev->dev, "request_irq(%d) fail\n", pdev->irq);
-		kfree(dev);
-		dev = NULL;
 		retval = -EBUSY;
-		goto finished;
+		goto err_irq;
 	}
 	dev->irq_registered = 1;
 
@@ -3314,8 +3302,17 @@ static int udc_pci_probe(
 		return 0;
 
 finished:
-	if (dev)
-		udc_pci_remove(pdev);
+	udc_pci_remove(pdev);
+	return retval;
+
+err_irq:
+	iounmap(dev->virt_addr);
+err_ioremap:
+	release_mem_region(resource, len);
+err_memreg:
+	pci_disable_device(pdev);
+err_pcidev:
+	kfree(dev);
 	return retval;
 }
 

drivers/usb/musb/musb_core.c

@@ -1051,6 +1051,7 @@ void musb_start(struct musb *musb)
 	 * (c) peripheral initiates, using SRP
 	 */
 	if (musb->port_mode != MUSB_PORT_MODE_HOST &&
+			musb->xceiv->otg->state != OTG_STATE_A_WAIT_BCON &&
 			(devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS) {
 		musb->is_active = 1;
 	} else {
@@ -2448,6 +2449,9 @@ static int musb_suspend(struct device *dev)
 	struct musb	*musb = dev_to_musb(dev);
 	unsigned long	flags;
 
+	musb_platform_disable(musb);
+	musb_generic_disable(musb);
+
 	spin_lock_irqsave(&musb->lock, flags);
 
 	if (is_peripheral_active(musb)) {
@@ -2501,6 +2505,9 @@ static int musb_resume(struct device *dev)
 	pm_runtime_disable(dev);
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
+
+	musb_start(musb);
+
 	return 0;
 }
 

drivers/usb/musb/ux500.c

@@ -379,6 +379,8 @@ static const struct of_device_id ux500_match[] = {
         {}
 };
 
+MODULE_DEVICE_TABLE(of, ux500_match);
+
 static struct platform_driver ux500_driver = {
 	.probe		= ux500_probe,
 	.remove		= ux500_remove,

drivers/usb/phy/Kconfig

@@ -155,7 +155,7 @@ config USB_MSM_OTG
 config USB_QCOM_8X16_PHY
 	tristate "Qualcomm APQ8016/MSM8916 on-chip USB PHY controller support"
 	depends on ARCH_QCOM || COMPILE_TEST
-	depends on RESET_CONTROLLER
+	depends on RESET_CONTROLLER && EXTCON
 	select USB_PHY
 	select USB_ULPI_VIEWPORT
 	help

drivers/usb/phy/phy-generic.c

@@ -232,7 +232,8 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 		clk_rate = pdata->clk_rate;
 		needs_vcc = pdata->needs_vcc;
 		if (gpio_is_valid(pdata->gpio_reset)) {
-			err = devm_gpio_request_one(dev, pdata->gpio_reset, 0,
+			err = devm_gpio_request_one(dev, pdata->gpio_reset,
+						    GPIOF_ACTIVE_LOW,
 						    dev_name(dev));
 			if (!err)
 				nop->gpiod_reset =