Commit aa19d1f1 authored by David S. Miller's avatar David S. Miller

Merge branch 'r8152-save-EEE'

Hayes Wang says:

====================
r8152: save EEE

v4:
For patch #2, remove redundant calling of "ocp_reg_write(tp, OCP_EEE_ADV, 0)".

v3:
For patch #2, fix the mistake caused by copying and pasting.

v2:
Adjust patch #1. The EEE has been disabled in the beginning of
r8153_hw_phy_cfg() and r8153b_hw_phy_cfg(), so only check if
it is necessary to enable EEE.

Add the patch #2 for the helper function.

v1:
Saving the settings of EEE to avoid they become the default settings
after reset_resume().
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 6d24e141 e7bde56b
......@@ -751,6 +751,7 @@ struct r8152 {
atomic_t rx_count;
bool eee_en;
int intr_interval;
u32 saved_wolopts;
u32 msg_enable;
......@@ -762,6 +763,7 @@ struct r8152 {
u16 ocp_base;
u16 speed;
u16 eee_adv;
u8 *intr_buff;
u8 version;
u8 duplex;
......@@ -3200,10 +3202,76 @@ static void r8152_eee_en(struct r8152 *tp, bool enable)
ocp_reg_write(tp, OCP_EEE_CONFIG3, config3);
}
static void r8152b_enable_eee(struct r8152 *tp)
static void r8153_eee_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
u16 config;
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
config = ocp_reg_read(tp, OCP_EEE_CFG);
if (enable) {
ocp_data |= EEE_RX_EN | EEE_TX_EN;
config |= EEE10_EN;
} else {
ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
config &= ~EEE10_EN;
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
ocp_reg_write(tp, OCP_EEE_CFG, config);
}
static void r8153b_eee_en(struct r8152 *tp, bool enable)
{
r8153_eee_en(tp, enable);
if (enable)
r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_EEE, 0);
else
r8153b_ups_flags_w1w0(tp, 0, UPS_FLAGS_EN_EEE);
}
static void rtl_eee_enable(struct r8152 *tp, bool enable)
{
r8152_eee_en(tp, true);
r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, MDIO_EEE_100TX);
switch (tp->version) {
case RTL_VER_01:
case RTL_VER_02:
case RTL_VER_07:
if (enable) {
r8152_eee_en(tp, true);
r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
tp->eee_adv);
} else {
r8152_eee_en(tp, false);
r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
}
break;
case RTL_VER_03:
case RTL_VER_04:
case RTL_VER_05:
case RTL_VER_06:
if (enable) {
r8153_eee_en(tp, true);
ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
} else {
r8153_eee_en(tp, false);
ocp_reg_write(tp, OCP_EEE_ADV, 0);
}
break;
case RTL_VER_08:
case RTL_VER_09:
if (enable) {
r8153b_eee_en(tp, true);
ocp_reg_write(tp, OCP_EEE_ADV, tp->eee_adv);
} else {
r8153b_eee_en(tp, false);
ocp_reg_write(tp, OCP_EEE_ADV, 0);
}
break;
default:
break;
}
}
static void r8152b_enable_fc(struct r8152 *tp)
......@@ -3224,7 +3292,7 @@ static void rtl8152_disable(struct r8152 *tp)
static void r8152b_hw_phy_cfg(struct r8152 *tp)
{
r8152b_enable_eee(tp);
rtl_eee_enable(tp, tp->eee_en);
r8152_aldps_en(tp, true);
r8152b_enable_fc(tp);
......@@ -3418,36 +3486,6 @@ static void r8153b_aldps_en(struct r8152 *tp, bool enable)
r8153b_ups_flags_w1w0(tp, 0, UPS_FLAGS_EN_ALDPS);
}
static void r8153_eee_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
u16 config;
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
config = ocp_reg_read(tp, OCP_EEE_CFG);
if (enable) {
ocp_data |= EEE_RX_EN | EEE_TX_EN;
config |= EEE10_EN;
} else {
ocp_data &= ~(EEE_RX_EN | EEE_TX_EN);
config &= ~EEE10_EN;
}
ocp_write_word(tp, MCU_TYPE_PLA, PLA_EEE_CR, ocp_data);
ocp_reg_write(tp, OCP_EEE_CFG, config);
}
static void r8153b_eee_en(struct r8152 *tp, bool enable)
{
r8153_eee_en(tp, enable);
if (enable)
r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_EEE, 0);
else
r8153b_ups_flags_w1w0(tp, 0, UPS_FLAGS_EN_EEE);
}
static void r8153b_enable_fc(struct r8152 *tp)
{
r8152b_enable_fc(tp);
......@@ -3463,8 +3501,7 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
r8153_aldps_en(tp, false);
/* disable EEE before updating the PHY parameters */
r8153_eee_en(tp, false);
ocp_reg_write(tp, OCP_EEE_ADV, 0);
rtl_eee_enable(tp, false);
if (tp->version == RTL_VER_03) {
data = ocp_reg_read(tp, OCP_EEE_CFG);
......@@ -3495,8 +3532,8 @@ static void r8153_hw_phy_cfg(struct r8152 *tp)
sram_write(tp, SRAM_10M_AMP1, 0x00af);
sram_write(tp, SRAM_10M_AMP2, 0x0208);
r8153_eee_en(tp, true);
ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX);
if (tp->eee_en)
rtl_eee_enable(tp, true);
r8153_aldps_en(tp, true);
r8152b_enable_fc(tp);
......@@ -3536,8 +3573,7 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
r8153b_aldps_en(tp, false);
/* disable EEE before updating the PHY parameters */
r8153b_eee_en(tp, false);
ocp_reg_write(tp, OCP_EEE_ADV, 0);
rtl_eee_enable(tp, false);
r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
......@@ -3599,8 +3635,8 @@ static void r8153b_hw_phy_cfg(struct r8152 *tp)
r8153b_ups_flags_w1w0(tp, ups_flags, 0);
r8153b_eee_en(tp, true);
ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX);
if (tp->eee_en)
rtl_eee_enable(tp, true);
r8153b_aldps_en(tp, true);
r8153b_enable_fc(tp);
......@@ -4891,7 +4927,7 @@ static void rtl8152_get_strings(struct net_device *dev, u32 stringset, u8 *data)
static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u32 ocp_data, lp, adv, supported = 0;
u32 lp, adv, supported = 0;
u16 val;
val = r8152_mmd_read(tp, MDIO_MMD_PCS, MDIO_PCS_EEE_ABLE);
......@@ -4903,13 +4939,10 @@ static int r8152_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
val = r8152_mmd_read(tp, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE);
lp = mmd_eee_adv_to_ethtool_adv_t(val);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
ocp_data &= EEE_RX_EN | EEE_TX_EN;
eee->eee_enabled = !!ocp_data;
eee->eee_enabled = tp->eee_en;
eee->eee_active = !!(supported & adv & lp);
eee->supported = supported;
eee->advertised = adv;
eee->advertised = tp->eee_adv;
eee->lp_advertised = lp;
return 0;
......@@ -4919,19 +4952,17 @@ static int r8152_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
r8152_eee_en(tp, eee->eee_enabled);
if (!eee->eee_enabled)
val = 0;
tp->eee_en = eee->eee_enabled;
tp->eee_adv = val;
r8152_mmd_write(tp, MDIO_MMD_AN, MDIO_AN_EEE_ADV, val);
rtl_eee_enable(tp, tp->eee_en);
return 0;
}
static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u32 ocp_data, lp, adv, supported = 0;
u32 lp, adv, supported = 0;
u16 val;
val = ocp_reg_read(tp, OCP_EEE_ABLE);
......@@ -4943,46 +4974,15 @@ static int r8153_get_eee(struct r8152 *tp, struct ethtool_eee *eee)
val = ocp_reg_read(tp, OCP_EEE_LPABLE);
lp = mmd_eee_adv_to_ethtool_adv_t(val);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEE_CR);
ocp_data &= EEE_RX_EN | EEE_TX_EN;
eee->eee_enabled = !!ocp_data;
eee->eee_enabled = tp->eee_en;
eee->eee_active = !!(supported & adv & lp);
eee->supported = supported;
eee->advertised = adv;
eee->advertised = tp->eee_adv;
eee->lp_advertised = lp;
return 0;
}
static int r8153_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
r8153_eee_en(tp, eee->eee_enabled);
if (!eee->eee_enabled)
val = 0;
ocp_reg_write(tp, OCP_EEE_ADV, val);
return 0;
}
static int r8153b_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
{
u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
r8153b_eee_en(tp, eee->eee_enabled);
if (!eee->eee_enabled)
val = 0;
ocp_reg_write(tp, OCP_EEE_ADV, val);
return 0;
}
static int
rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
{
......@@ -5353,6 +5353,8 @@ static int rtl_ops_init(struct r8152 *tp)
ops->hw_phy_cfg = r8152b_hw_phy_cfg;
ops->autosuspend_en = rtl_runtime_suspend_enable;
tp->rx_buf_sz = 16 * 1024;
tp->eee_en = true;
tp->eee_adv = MDIO_EEE_100TX;
break;
case RTL_VER_03:
......@@ -5366,11 +5368,13 @@ static int rtl_ops_init(struct r8152 *tp)
ops->down = rtl8153_down;
ops->unload = rtl8153_unload;
ops->eee_get = r8153_get_eee;
ops->eee_set = r8153_set_eee;
ops->eee_set = r8152_set_eee;
ops->in_nway = rtl8153_in_nway;
ops->hw_phy_cfg = r8153_hw_phy_cfg;
ops->autosuspend_en = rtl8153_runtime_enable;
tp->rx_buf_sz = 32 * 1024;
tp->eee_en = true;
tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
break;
case RTL_VER_08:
......@@ -5382,11 +5386,13 @@ static int rtl_ops_init(struct r8152 *tp)
ops->down = rtl8153b_down;
ops->unload = rtl8153b_unload;
ops->eee_get = r8153_get_eee;
ops->eee_set = r8153b_set_eee;
ops->eee_set = r8152_set_eee;
ops->in_nway = rtl8153_in_nway;
ops->hw_phy_cfg = r8153b_hw_phy_cfg;
ops->autosuspend_en = rtl8153b_runtime_enable;
tp->rx_buf_sz = 32 * 1024;
tp->eee_en = true;
tp->eee_adv = MDIO_EEE_1000T | MDIO_EEE_100TX;
break;
default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment