Commit aa43c215 authored by Jeff Kirsher's avatar Jeff Kirsher

qlogic: Move the QLogic drivers

Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and
the necessary Kconfig and Makefile changes.

CC: Ron Mercer <ron.mercer@qlogic.com>
CC: Amit Kumar Salecha <amit.salecha@qlogic.com>
CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: default avatarAnirban Chakraborty <anirban.chakraborty@qlogic.com>
parent dee1ad47
......@@ -4499,7 +4499,7 @@ M: Amit Kumar Salecha <amit.salecha@qlogic.com>
L: netdev@vger.kernel.org
W: http://www.qlogic.com
S: Supported
F: drivers/net/netxen/
F: drivers/net/ethernet/qlogic/netxen/
NFS, SUNRPC, AND LOCKD CLIENTS
M: Trond Myklebust <Trond.Myklebust@netapp.com>
......@@ -5245,7 +5245,7 @@ M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/LICENSE.qla3xxx
F: drivers/net/qla3xxx.*
F: drivers/net/ethernet/qlogic/qla3xxx.*
QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
M: Amit Kumar Salecha <amit.salecha@qlogic.com>
......@@ -5253,7 +5253,7 @@ M: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/qlcnic/
F: drivers/net/ethernet/qlogic/qlcnic/
QLOGIC QLGE 10Gb ETHERNET DRIVER
M: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
......@@ -5261,7 +5261,7 @@ M: Ron Mercer <ron.mercer@qlogic.com>
M: linux-driver@qlogic.com
L: netdev@vger.kernel.org
S: Supported
F: drivers/net/qlge/
F: drivers/net/ethernet/qlogic/qlge/
QNX4 FILESYSTEM
M: Anders Larsen <al@alarsen.net>
......
......@@ -1707,15 +1707,6 @@ config XILINX_LL_TEMAC
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
help
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qla3xxx.
config ATL1
tristate "Atheros/Attansic L1 Gigabit Ethernet support"
depends on PCI
......@@ -1954,23 +1945,6 @@ config TEHUTI
help
Tehuti Networks 10G Ethernet NIC
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
select FW_LOADER
help
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
config QLGE
tristate "QLogic QLGE 10Gb Ethernet Driver Support"
depends on PCI
help
This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qlge.
config BNA
tristate "Brocade 1010/1020 10Gb Ethernet Driver support"
depends on PCI
......
......@@ -110,9 +110,6 @@ obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o
ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
obj-$(CONFIG_QLA3XXX) += qla3xxx.o
obj-$(CONFIG_QLCNIC) += qlcnic/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
......
......@@ -17,5 +17,6 @@ source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
endif # ETHERNET
......@@ -8,3 +8,4 @@ obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
#
# QLogic network device configuration
#
config NET_VENDOR_QLOGIC
bool "QLogic devices"
depends on PCI
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about QLogic cards. If you say Y, you will be asked for
your specific card in the following questions.
if NET_VENDOR_QLOGIC
config QLA3XXX
tristate "QLogic QLA3XXX Network Driver Support"
depends on PCI
---help---
This driver supports QLogic ISP3XXX gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qla3xxx.
config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI
select FW_LOADER
---help---
This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
devices.
config QLGE
tristate "QLogic QLGE 10Gb Ethernet Driver Support"
depends on PCI
---help---
This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called qlge.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
depends on PCI
select FW_LOADER
---help---
This enables the support for NetXen's Gigabit Ethernet card.
endif # NET_VENDOR_QLOGIC
#
# Makefile for the QLogic network device drivers.
#
obj-$(CONFIG_QLA3XXX) += qla3xxx.o
obj-$(CONFIG_QLCNIC) += qlcnic/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_NETXEN_NIC) += netxen/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment