Revert "usb: ohci-at91: Forcibly suspend ports while USB suspend"

This reverts commit 7150bc9b.

It is not correct, based on review from others.
Reported-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/devicetree/bindings/usb/atmel-usb.txt

@@ -3,10 +3,8 @@ Atmel SOC USB controllers
 OHCI
 
 Required properties:
- - compatible: Should be one of the following
-	       "atmel,at91rm9200-ohci" for USB controllers used in host mode.
-	       "atmel,sama5d2-ohci" for USB controllers used in host mode
-	       on SAMA5D2 which can force to suspend.
+ - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
+   used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral, host and system clocks

drivers/usb/host/ohci-at91.c

@@ -21,11 +21,8 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/mfd/syscon.h>
-#include <linux/regmap.h>
 #include <linux/usb.h>
 #include <linux/usb/hcd.h>
-#include <soc/at91/at91_sfr.h>
 
 #include "ohci.h"
 
@@ -48,18 +45,12 @@ struct at91_usbh_data {
 	u8 overcurrent_changed[AT91_MAX_USBH_PORTS];
 };
 
-struct ohci_at91_caps {
-	bool suspend_ctrl;
-};
-
 struct ohci_at91_priv {
 	struct clk *iclk;
 	struct clk *fclk;
 	struct clk *hclk;
 	bool clocked;
 	bool wakeup;		/* Saved wake-up state for resume */
-	const struct ohci_at91_caps *caps;
-	struct regmap *sfr_regmap;
 };
 /* interface and function clocks; sometimes also an AHB clock */
 
@@ -141,17 +132,6 @@ static void at91_stop_hc(struct platform_device *pdev)
 
 /*-------------------------------------------------------------------------*/
 
-struct regmap *at91_dt_syscon_sfr(void)
-{
-	struct regmap *regmap;
-
-	regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
-	if (IS_ERR(regmap))
-		regmap = NULL;
-
-	return regmap;
-}
-
 static void usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
 
 /* configure so an HC device and id are always provided */
@@ -217,17 +197,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 		goto err;
 	}
 
-	ohci_at91->caps = (const struct ohci_at91_caps *)
-			  of_device_get_match_data(&pdev->dev);
-	if (!ohci_at91->caps)
-		return -ENODEV;
-
-	if (ohci_at91->caps->suspend_ctrl) {
-		ohci_at91->sfr_regmap = at91_dt_syscon_sfr();
-		if (!ohci_at91->sfr_regmap)
-			dev_warn(dev, "failed to find sfr node\n");
-	}
-
 	board = hcd->self.controller->platform_data;
 	ohci = hcd_to_ohci(hcd);
 	ohci->num_ports = board->ports;
@@ -471,17 +440,8 @@ static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static const struct ohci_at91_caps at91rm9200_caps = {
-	.suspend_ctrl = false,
-};
-
-static const struct ohci_at91_caps sama5d2_caps = {
-	.suspend_ctrl = true,
-};
-
 static const struct of_device_id at91_ohci_dt_ids[] = {
-	{ .compatible = "atmel,at91rm9200-ohci", .data = &at91rm9200_caps },
-	{ .compatible = "atmel,sama5d2-ohci", .data = &sama5d2_caps },
+	{ .compatible = "atmel,at91rm9200-ohci" },
 	{ /* sentinel */ }
 };
 
@@ -621,38 +581,6 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int ohci_at91_port_ctrl(struct regmap *regmap, bool enable)
-{
-	u32 regval;
-	int ret;
-
-	if (!regmap)
-		return -EINVAL;
-
-	ret = regmap_read(regmap, SFR_OHCIICR, &regval);
-	if (ret)
-		return ret;
-
-	if (enable)
-		regval &= ~SFR_OHCIICR_USB_SUSPEND;
-	else
-		regval |= SFR_OHCIICR_USB_SUSPEND;
-
-	regmap_write(regmap, SFR_OHCIICR, regval);
-
-	return 0;
-}
-
-static int ohci_at91_port_suspend(struct regmap *regmap)
-{
-	return ohci_at91_port_ctrl(regmap, false);
-}
-
-static int ohci_at91_port_resume(struct regmap *regmap)
-{
-	return ohci_at91_port_ctrl(regmap, true);
-}
-
 static int __maybe_unused
 ohci_hcd_at91_drv_suspend(struct device *dev)
 {
@@ -690,9 +618,6 @@ ohci_hcd_at91_drv_suspend(struct device *dev)
 		ohci_writel(ohci, ohci->hc_control, &ohci->regs->control);
 		ohci->rh_state = OHCI_RH_HALTED;
 
-		if (ohci_at91->caps->suspend_ctrl)
-			ohci_at91_port_suspend(ohci_at91->sfr_regmap);
-
 		/* flush the writes */
 		(void) ohci_readl (ohci, &ohci->regs->control);
 		at91_stop_clock(ohci_at91);
@@ -712,9 +637,6 @@ ohci_hcd_at91_drv_resume(struct device *dev)
 
 	at91_start_clock(ohci_at91);
 
-	if (ohci_at91->caps->suspend_ctrl)
-		ohci_at91_port_resume(ohci_at91->sfr_regmap);
-
 	ohci_resume(hcd, false);
 	return 0;
 }

include/soc/at91/at91_sfr.h

-/*
- * Header file for the Atmel DDR/SDR SDRAM Controller
- *
- * Copyright (C) 2016 Atmel Corporation
- *
- * Author: Wenyou Yang <wenyou.yang@atmel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#ifndef __AT91_SFR_H__
-#define __AT91_SFR_H__
-
-#define SFR_DDRCFG		0x04	/* DDR Configuration Register */
-/* 0x08 ~ 0x0c: Reserved */
-#define SFR_OHCIICR		0x10	/* OHCI Interrupt Configuration Register */
-#define SFR_OHCIISR		0x14	/* OHCI Interrupt Status Register */
-
-#define SFR_OHCIICR_SUSPEND_A	BIT(8)
-#define SFR_OHCIICR_SUSPEND_B	BIT(9)
-#define SFR_OHCIICR_SUSPEND_C	BIT(10)
-
-#define SFR_OHCIICR_USB_SUSPEND	(SFR_OHCIICR_SUSPEND_A | \
-				 SFR_OHCIICR_SUSPEND_B | \
-				 SFR_OHCIICR_SUSPEND_C)
-
-#endif