Skip to content

L
linux
Commit aa68e9a3 authored by Lee Jones's avatar Lee Jones Committed by Alex Deucher
Browse files
Options

drm/amd/pm/powerplay/hwmgr/smu7_thermal: Repair formatting in a bunch of function docs 

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:112: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_static_mode'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:112: warning: Function parameter or member 'mode' not described in 'smu7_fan_ctrl_set_static_mode'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:137: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_default_mode'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:209: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_fan_speed_percent'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:209: warning: Function parameter or member 'speed' not described in 'smu7_fan_ctrl_set_fan_speed_percent'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:245: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_reset_fan_speed_to_default'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:268: warning: Function parameter or member 'hwmgr' not described in 'smu7_fan_ctrl_set_fan_speed_rpm'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:268: warning: Function parameter or member 'speed' not described in 'smu7_fan_ctrl_set_fan_speed_rpm'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:299: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_get_temperature'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_set_temperature_range'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'low_temp' not described in 'smu7_thermal_set_temperature_range'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:325: warning: Function parameter or member 'high_temp' not described in 'smu7_thermal_set_temperature_range'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:358: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_initialize'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:377: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_enable_alert'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:395: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_disable_alert'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:414: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_stop_thermal_controller'
 drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_thermal.c:433: warning: Function parameter or member 'hwmgr' not described in 'smu7_thermal_start_smc_fan_control'

Cc: Evan Quan <evan.quan@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 1c206370
Hide whitespace changes
Inline Side-by-side
Showing with 50 additions and 53 deletions
drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_thermal.c
View file @ aa68e9a3
......@@ -103,11 +103,11 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed)
}
/**
* Set Fan Speed Control to static mode, so that the user can decide what speed to use.
* @param hwmgr the address of the powerplay hardware manager.
* mode the fan control mode, 0 default, 1 by percent, 5, by RPM
* @exception Should always succeed.
*/
* smu7_fan_ctrl_set_static_mode - Set Fan Speed Control to static mode, so that the user can decide what speed to use.
* @hwmgr: the address of the powerplay hardware manager.
* @mode: the fan control mode, 0 default, 1 by percent, 5, by RPM
* Exception: Should always succeed.
*/
int smu7_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
{
if (hwmgr->fan_ctrl_is_in_default_mode) {
......@@ -130,8 +130,8 @@ int smu7_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode)
/**
* Reset Fan Speed Control to default mode.
* @param hwmgr the address of the powerplay hardware manager.
* @exception Should always succeed.
* @hwmgr: the address of the powerplay hardware manager.
* Exception: Should always succeed.
*/
int smu7_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr)
{
......@@ -199,11 +199,11 @@ int smu7_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr)
}
/**
* Set Fan Speed in percent.
* @param hwmgr the address of the powerplay hardware manager.
* @param speed is the percentage value (0% - 100%) to be set.
* @exception Fails is the 100% setting appears to be 0.
*/
* smu7_fan_ctrl_set_fan_speed_percent - Set Fan Speed in percent.
* @hwmgr: the address of the powerplay hardware manager.
* @speed: is the percentage value (0% - 100%) to be set.
* Exception: Fails is the 100% setting appears to be 0.
*/
int smu7_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
uint32_t speed)
{
......@@ -237,9 +237,9 @@ int smu7_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr,
}
/**
* Reset Fan Speed to default.
* @param hwmgr the address of the powerplay hardware manager.
* @exception Always succeeds.
* smu7_fan_ctrl_reset_fan_speed_to_default - Reset Fan Speed to default.
* @hwmgr: the address of the powerplay hardware manager.
* Exception: Always succeeds.
*/
int smu7_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
{
......@@ -259,11 +259,11 @@ int smu7_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr)
}
/**
* Set Fan Speed in RPM.
* @param hwmgr the address of the powerplay hardware manager.
* @param speed is the percentage value (min - max) to be set.
* @exception Fails is the speed not lie between min and max.
*/
* smu7_fan_ctrl_set_fan_speed_rpm - Set Fan Speed in RPM.
* @hwmgr: the address of the powerplay hardware manager.
* @speed: is the percentage value (min - max) to be set.
* Exception: Fails is the speed not lie between min and max.
*/
int smu7_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
{
uint32_t tach_period;
......@@ -291,10 +291,10 @@ int smu7_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed)
}
/**
* Reads the remote temperature from the SIslands thermal controller.
*
* @param hwmgr The address of the hardware manager.
*/
* smu7_thermal_get_temperature - Reads the remote temperature from the SIslands thermal controller.
*
* @hwmgr: The address of the hardware manager.
*/
int smu7_thermal_get_temperature(struct pp_hwmgr *hwmgr)
{
int temp;
......@@ -314,12 +314,13 @@ int smu7_thermal_get_temperature(struct pp_hwmgr *hwmgr)
}
/**
* Set the requested temperature range for high and low alert signals
*
* @param hwmgr The address of the hardware manager.
* @param range Temperature range to be programmed for high and low alert signals
* @exception PP_Result_BadInput if the input data is not valid.
*/
* smu7_thermal_set_temperature_range - Set the requested temperature range for high and low alert signals
*
* @hwmgr: The address of the hardware manager.
* @low_temp: Temperature to be programmed for high alert signals
* @high_temp: Temperature to be programmed for low alert signals
* Exception: PP_Result_BadInput if the input data is not valid.
*/
static int smu7_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
int low_temp, int high_temp)
{
......@@ -350,10 +351,10 @@ static int smu7_thermal_set_temperature_range(struct pp_hwmgr *hwmgr,
}
/**
* Programs thermal controller one-time setting registers
*
* @param hwmgr The address of the hardware manager.
*/
* smu7_thermal_initialize - Programs thermal controller one-time setting registers
*
* @hwmgr: The address of the hardware manager.
*/
static int smu7_thermal_initialize(struct pp_hwmgr *hwmgr)
{
if (hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution)
......@@ -369,10 +370,10 @@ static int smu7_thermal_initialize(struct pp_hwmgr *hwmgr)
}
/**
* Enable thermal alerts on the RV770 thermal controller.
*
* @param hwmgr The address of the hardware manager.
*/
* smu7_thermal_enable_alert - Enable thermal alerts on the RV770 thermal controller.
*
* @hwmgr: The address of the hardware manager.
*/
static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
{
uint32_t alert;
......@@ -388,9 +389,9 @@ static void smu7_thermal_enable_alert(struct pp_hwmgr *hwmgr)
}
/**
* Disable thermal alerts on the RV770 thermal controller.
* @param hwmgr The address of the hardware manager.
*/
* smu7_thermal_disable_alert - Disable thermal alerts on the RV770 thermal controller.
* @hwmgr: The address of the hardware manager.
*/
int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
{
uint32_t alert;
......@@ -406,10 +407,10 @@ int smu7_thermal_disable_alert(struct pp_hwmgr *hwmgr)
}
/**
* Uninitialize the thermal controller.
* Currently just disables alerts.
* @param hwmgr The address of the hardware manager.
*/
* smu7_thermal_stop_thermal_controller - Uninitialize the thermal controller.
* Currently just disables alerts.
* @hwmgr: The address of the hardware manager.
*/
int smu7_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
{
int result = smu7_thermal_disable_alert(hwmgr);
......@@ -421,14 +422,10 @@ int smu7_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr)
}
/**
* Start the fan control on the SMC.
* @param hwmgr the address of the powerplay hardware manager.
* @param pInput the pointer to input data
* @param pOutput the pointer to output data
* @param pStorage the pointer to temporary storage
* @param Result the last failure code
* @return result from set temperature range routine
*/
* smu7_thermal_start_smc_fan_control - Start the fan control on the SMC.
* @hwmgr: the address of the powerplay hardware manager.
* Return: result from set temperature range routine
*/
static int smu7_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr)
{
/* If the fantable setup has failed we could have disabled
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7