Commit aa92b331 authored by David Collins's avatar David Collins Committed by Daniel Lezcano

thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals

Add support for TEMP_ALARM GEN2 PMIC peripherals with digital
major revision 1.  This revision utilizes a different temperature
threshold mapping than earlier revisions.
Signed-off-by: default avatarDavid Collins <collinsd@codeaurora.org>
Signed-off-by: default avatarGuru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: default avatarStephen Boyd <sboyd@kernel.org>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/69c90a004b3f5b7ae282f5ec5ca2920a48f23e02.1596040416.git.gurus@codeaurora.org
parent 34ab17cc
......@@ -17,6 +17,7 @@
#include "../thermal_core.h"
#define QPNP_TM_REG_DIG_MAJOR 0x01
#define QPNP_TM_REG_TYPE 0x04
#define QPNP_TM_REG_SUBTYPE 0x05
#define QPNP_TM_REG_STATUS 0x08
......@@ -38,26 +39,30 @@
#define ALARM_CTRL_FORCE_ENABLE BIT(7)
/*
* Trip point values based on threshold control
* 0 = {105 C, 125 C, 145 C}
* 1 = {110 C, 130 C, 150 C}
* 2 = {115 C, 135 C, 155 C}
* 3 = {120 C, 140 C, 160 C}
*/
#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */
#define TEMP_STAGE_HYSTERESIS 2000
#define THRESH_COUNT 4
#define STAGE_COUNT 3
/* Over-temperature trip point values in mC */
static const long temp_map_gen1[THRESH_COUNT][STAGE_COUNT] = {
{ 105000, 125000, 145000 },
{ 110000, 130000, 150000 },
{ 115000, 135000, 155000 },
{ 120000, 140000, 160000 },
};
static const long temp_map_gen2_v1[THRESH_COUNT][STAGE_COUNT] = {
{ 90000, 110000, 140000 },
{ 95000, 115000, 145000 },
{ 100000, 120000, 150000 },
{ 105000, 125000, 155000 },
};
#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */
#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */
#define THRESH_MIN 0
#define THRESH_MAX 3
/* Stage 2 Threshold Min: 125 C */
#define STAGE2_THRESHOLD_MIN 125000
/* Stage 2 Threshold Max: 140 C */
#define STAGE2_THRESHOLD_MAX 140000
#define TEMP_STAGE_HYSTERESIS 2000
/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */
#define DEFAULT_TEMP 37000
......@@ -77,6 +82,7 @@ struct qpnp_tm_chip {
bool initialized;
struct iio_channel *adc;
const long (*temp_map)[THRESH_COUNT][STAGE_COUNT];
};
/* This array maps from GEN2 alarm state to GEN1 alarm stage */
......@@ -100,6 +106,23 @@ static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data)
return regmap_write(chip->map, chip->base + addr, data);
}
/**
* qpnp_tm_decode_temp() - return temperature in mC corresponding to the
* specified over-temperature stage
* @chip: Pointer to the qpnp_tm chip
* @stage: Over-temperature stage
*
* Return: temperature in mC
*/
static long qpnp_tm_decode_temp(struct qpnp_tm_chip *chip, unsigned int stage)
{
if (!chip->temp_map || chip->thresh >= THRESH_COUNT || stage == 0 ||
stage > STAGE_COUNT)
return 0;
return (*chip->temp_map)[chip->thresh][stage - 1];
}
/**
* qpnp_tm_get_temp_stage() - return over-temperature stage
* @chip: Pointer to the qpnp_tm chip
......@@ -149,14 +172,12 @@ static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip)
if (stage_new > stage_old) {
/* increasing stage, use lower bound */
chip->temp = (stage_new - 1) * TEMP_STAGE_STEP +
chip->thresh * TEMP_THRESH_STEP +
TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
chip->temp = qpnp_tm_decode_temp(chip, stage_new)
+ TEMP_STAGE_HYSTERESIS;
} else if (stage_new < stage_old) {
/* decreasing stage, use upper bound */
chip->temp = stage_new * TEMP_STAGE_STEP +
chip->thresh * TEMP_THRESH_STEP -
TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN;
chip->temp = qpnp_tm_decode_temp(chip, stage_new + 1)
- TEMP_STAGE_HYSTERESIS;
}
chip->stage = stage;
......@@ -199,26 +220,28 @@ static int qpnp_tm_get_temp(void *data, int *temp)
static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
int temp)
{
u8 reg;
long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1];
long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1];
bool disable_s2_shutdown = false;
u8 reg;
WARN_ON(!mutex_is_locked(&chip->lock));
/*
* Default: S2 and S3 shutdown enabled, thresholds at
* 105C/125C/145C, monitoring at 25Hz
* lowest threshold set, monitoring at 25Hz
*/
reg = SHUTDOWN_CTRL1_RATE_25HZ;
if (temp == THERMAL_TEMP_INVALID ||
temp < STAGE2_THRESHOLD_MIN) {
temp < stage2_threshold_min) {
chip->thresh = THRESH_MIN;
goto skip;
}
if (temp <= STAGE2_THRESHOLD_MAX) {
if (temp <= stage2_threshold_max) {
chip->thresh = THRESH_MAX -
((STAGE2_THRESHOLD_MAX - temp) /
((stage2_threshold_max - temp) /
TEMP_THRESH_STEP);
disable_s2_shutdown = true;
} else {
......@@ -326,9 +349,7 @@ static int qpnp_tm_init(struct qpnp_tm_chip *chip)
? chip->stage : alarm_state_map[chip->stage];
if (stage)
chip->temp = chip->thresh * TEMP_THRESH_STEP +
(stage - 1) * TEMP_STAGE_STEP +
TEMP_THRESH_MIN;
chip->temp = qpnp_tm_decode_temp(chip, stage);
crit_temp = qpnp_tm_get_critical_trip_temp(chip);
ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp);
......@@ -350,7 +371,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
{
struct qpnp_tm_chip *chip;
struct device_node *node;
u8 type, subtype;
u8 type, subtype, dig_major;
u32 res;
int ret, irq;
......@@ -400,6 +421,12 @@ static int qpnp_tm_probe(struct platform_device *pdev)
return ret;
}
ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MAJOR, &dig_major);
if (ret < 0) {
dev_err(&pdev->dev, "could not read dig_major\n");
return ret;
}
if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1
&& subtype != QPNP_TM_SUBTYPE_GEN2)) {
dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n",
......@@ -408,6 +435,10 @@ static int qpnp_tm_probe(struct platform_device *pdev)
}
chip->subtype = subtype;
if (subtype == QPNP_TM_SUBTYPE_GEN2 && dig_major >= 1)
chip->temp_map = &temp_map_gen2_v1;
else
chip->temp_map = &temp_map_gen1;
/*
* Register the sensor before initializing the hardware to be able to
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment