pinctrl: qcom: Add missing header(s)

Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.

While at it, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

drivers/pinctrl/qcom/pinctrl-lpass-lpi.c

@@ -8,10 +8,14 @@
 #include <linux/gpio/driver.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/seq_file.h>
+
 #include <linux/pinctrl/pinconf-generic.h>
 #include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinmux.h>
+
 #include "../pinctrl-utils.h"
+
 #include "pinctrl-lpass-lpi.h"
 
 #define MAX_LPI_NUM_CLKS	2

drivers/pinctrl/qcom/pinctrl-lpass-lpi.h

@@ -6,10 +6,15 @@
 #ifndef __PINCTRL_LPASS_LPI_H__
 #define __PINCTRL_LPASS_LPI_H__
 
-#include <linux/bitops.h>
-#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/kernel.h>
+
 #include "../core.h"
 
+struct platform_device;
+
+struct pinctrl_pin_desc;
+
 #define LPI_SLEW_RATE_CTL_REG	0xa000
 #define LPI_TLMM_REG_OFFSET		0x1000
 #define LPI_SLEW_RATE_MAX		0x03

drivers/pinctrl/qcom/pinctrl-msm.c

@@ -6,31 +6,34 @@
 
 #include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
+#include <linux/log2.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/qcom_scm.h>
+#include <linux/reboot.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
 #include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
 #include <linux/pinctrl/pinctrl.h>
 #include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/slab.h>
-#include <linux/gpio/driver.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/reboot.h>
-#include <linux/pm.h>
-#include <linux/log2.h>
-#include <linux/qcom_scm.h>
 
 #include <linux/soc/qcom/irq.h>
 
 #include "../core.h"
 #include "../pinconf.h"
-#include "pinctrl-msm.h"
 #include "../pinctrl-utils.h"
 
+#include "pinctrl-msm.h"
+
 #define MAX_NR_GPIO 300
 #define MAX_NR_TILES 4
 #define PS_HOLD_OFFSET 0x820

drivers/pinctrl/qcom/pinctrl-msm.h

@@ -5,6 +5,11 @@
 #ifndef __PINCTRL_MSM_H__
 #define __PINCTRL_MSM_H__
 
+#include <linux/pm.h>
+#include <linux/types.h>
+
+struct platform_device;
+
 struct pinctrl_pin_desc;
 
 /**

drivers/pinctrl/qcom/pinctrl-spmi-gpio.c

@@ -9,15 +9,17 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/spmi.h>
 #include <linux/types.h>
 
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 #include "../core.h"

drivers/pinctrl/qcom/pinctrl-spmi-mpp.c

@@ -7,14 +7,16 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinmux.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/seq_file.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinmux.h>
+
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
 
 #include "../core.h"

drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c

@@ -4,18 +4,20 @@
  * Copyright (c) 2013, The Linux Foundation. All rights reserved.
  */
 
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/slab.h>
-#include <linux/regmap.h>
 #include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
 
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 

drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c

@@ -4,18 +4,20 @@
  * Copyright (c) 2013, The Linux Foundation. All rights reserved.
  */
 
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/slab.h>
-#include <linux/regmap.h>
 #include <linux/gpio/driver.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
 
 #include <dt-bindings/pinctrl/qcom,pmic-mpp.h>