Skip to content

L
linux
Commit aac59e3e authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Among the things new for this release
  are:

   - More support for the AM33xx platforms from TI
   - Tegra 124 support, and some updates to older tegra families as well
   - imx cleanups and updates across the board
   - A rename of Broadcom's Mobile platforms which were introduced as
     ARCH_BCM, and turned out to be too broad a name.  New name is
     ARCH_BCM_MOBILE.
   - A whole bunch of updates and fixes for integrator, making the
     platform code more modern and switches over to DT-only booting.
   - Support for two new Renesas shmobile chipsets.  Next up for them is
     more work on consolidation instead of introduction of new
     non-multiplatform SoCs, we're all looking forward to that!
   - Misc cleanups for older Samsung platforms, some Allwinner updates,
     etc"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits)
  ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config
  ARM: bcm_defconfig: Run "make savedefconfig"
  ARM: bcm281xx: Add ARCH Timers to config
  rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm)
  ARM: vexpress: Enable platform-specific options in defconfig
  ARM: vexpress: Make defconfig work again
  ARM: sunxi: remove .init_time hooks
  ARM: imx: enable suspend for imx6sl
  ARM: imx: ensure dsm_request signal is not asserted when setting LPM
  ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter()
  ARM: imx6q: move low-power code out of clock driver
  ARM: imx: drop extern with function prototypes in common.h
  ARM: imx: reset core along with enable/disable operation
  ARM: imx: do not return from imx_cpu_die() call
  ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING
  ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options
  ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO
  ARM: imx: replace imx6q_restart() with mxc_restart()
  ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt
  ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt
  ...
parents 21604cdc 005ff5fb
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 8328 additions and 5357 deletions
Documentation/arm/Marvell/README
View file @ aac59e3e
......@@ -88,6 +88,7 @@ EBU Armada family
MV78230
MV78260
MV78460
NOTE: not to be confused with the non-SMP 78xx0 SoCs
Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
No public datasheet available.
......
Documentation/arm/sunxi/README
View file @ aac59e3e
......@@ -10,6 +10,10 @@ SunXi family
Linux kernel mach directory: arch/arm/mach-sunxi
Flavors:
* ARM926 based SoCs
- Allwinner F20 (sun3i)
+ Not Supported
* ARM Cortex-A8 based SoCs
- Allwinner A10 (sun4i)
+ Datasheet
......@@ -25,4 +29,24 @@ SunXi family
+ Datasheet
http://dl.linux-sunxi.org/A13/A13%20Datasheet%20-%20v1.12%20%282012-03-29%29.pdf
+ User Manual
http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-08-08%29.pdf
http://dl.linux-sunxi.org/A13/A13%20User%20Manual%20-%20v1.2%20%282013-01-08%29.pdf
* Dual ARM Cortex-A7 based SoCs
- Allwinner A20 (sun7i)
+ User Manual
http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
- Allwinner A23
+ Not Supported
* Quad ARM Cortex-A7 based SoCs
- Allwinner A31 (sun6i)
+ Datasheet
http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf
- Allwinner A31s (sun6i)
+ Not Supported
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80
+ Not Supported
\ No newline at end of file
Documentation/devicetree/bindings/arm/arm-boards
View file @ aac59e3e
......@@ -9,9 +9,53 @@ Required properties (in root node):
FPGA type interrupt controllers, see the versatile-fpga-irq binding doc.
In the root node the Integrator/CP must have a /cpcon node pointing
to the CP control registers, and the Integrator/AP must have a
/syscon node pointing to the Integrator/AP system controller.
Required nodes:
- core-module: the root node to the Integrator platforms must have
a core-module with regs and the compatible string
"arm,core-module-integrator"
Required properties for the core module:
- regs: the location and size of the core module registers, one
range of 0x200 bytes.
- syscon: the root node of the Integrator platforms must have a
system controller node pointong to the control registers,
with the compatible string
"arm,integrator-ap-syscon"
"arm,integrator-cp-syscon"
respectively.
Required properties for the system controller:
- regs: the location and size of the system controller registers,
one range of 0x100 bytes.
Required properties for the AP system controller:
- interrupts: the AP syscon node must include the logical module
interrupts, stated in order of module instance <module 0>,
<module 1>, <module 2> ... for the CP system controller this
is not required not of any use.
/dts-v1/;
/include/ "integrator.dtsi"
/ {
model = "ARM Integrator/AP";
compatible = "arm,integrator-ap";
core-module@10000000 {
compatible = "arm,core-module-integrator";
reg = <0x10000000 0x200>;
};
syscon {
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
interrupt-parent = <&pic>;
/* These are the logic module IRQs */
interrupts = <9>, <10>, <11>, <12>;
};
};
ARM Versatile Application and Platform Baseboards
......
Documentation/devicetree/bindings/clock/imx6q-clock.txt
View file @ aac59e3e
......@@ -215,6 +215,11 @@ clocks and IDs.
cko2 200
cko 201
vdoa 202
pll4_audio_div 203
lvds1_sel 204
lvds2_sel 205
lvds1_gate 206
lvds2_gate 207
Examples:
......
Documentation/devicetree/bindings/clock/sunxi.txt
View file @ aac59e3e
......@@ -45,8 +45,8 @@ Additionally, "allwinner,*-gates-clk" clocks require:
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. The values of this
ID are documented in sunxi/<soc>-gates.txt.
provide an additional ID in their clock property. This ID is the
offset of the bit controlling this particular gate in the register.
For example:
......
Documentation/devicetree/bindings/clock/sunxi/sun4i-a10-gates.txt deleted 100644 → 0
View file @ 21604cdc
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun4i-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2*
EHCI1 3
OHCI1 4*
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12**
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
PATA 24
SATA 25**
GPS 26*
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE1 46
DE_FE1 47
MP 50
MALI400 52
* APB0 gates ("allwinner,sun4i-apb0-gates-clk")
CODEC 0
SPDIF 1*
AC97 2
IIS 3
PIO 5
IR0 6
IR1 7
KEYPAD 10
* APB1 gates ("allwinner,sun4i-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
CAN 4
SCR 5
PS20 6
PS21 7
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/clock/sunxi/sun5i-a10s-gates.txt deleted 100644 → 0
View file @ 21604cdc
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun5i-a10s-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
NAND 13
SDRAM 14
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
GPS 26
HSTIMER 28
VE 32
TVE 34
LCD 36
CSI 40
HDMI 43
DE_BE 44
DE_FE 46
IEP 51
MALI400 52
* APB0 gates ("allwinner,sun5i-a10s-apb0-gates-clk")
CODEC 0
IIS 3
PIO 5
IR 6
KEYPAD 10
* APB1 gates ("allwinner,sun5i-a10s-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
UART0 16
UART1 17
UART2 18
UART3 19
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/clock/sunxi/sun5i-a13-gates.txt deleted 100644 → 0
View file @ 21604cdc
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun5i-a13-ahb-gates-clk")
USBOTG 0
EHCI 1
OHCI 2
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
NAND 13
SDRAM 14
SPI0 20
SPI1 21
SPI2 22
STIMER 28
VE 32
LCD 36
CSI 40
DE_BE 44
DE_FE 46
IEP 51
MALI400 52
* APB0 gates ("allwinner,sun5i-a13-apb0-gates-clk")
CODEC 0
PIO 5
IR 6
* APB1 gates ("allwinner,sun5i-a13-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
UART1 17
UART3 19
Documentation/devicetree/bindings/clock/sunxi/sun6i-a31-gates.txt deleted 100644 → 0
View file @ 21604cdc
Gate clock outputs
------------------
* AHB1 gates ("allwinner,sun6i-a31-ahb1-gates-clk")
MIPI DSI 1
SS 5
DMA 6
MMC0 8
MMC1 9
MMC2 10
MMC3 11
NAND1 12
NAND0 13
SDRAM 14
GMAC 17
TS 18
HSTIMER 19
SPI0 20
SPI1 21
SPI2 22
SPI3 23
USB_OTG 24
EHCI0 26
EHCI1 27
OHCI0 29
OHCI1 30
OHCI2 31
VE 32
LCD0 36
LCD1 37
CSI 40
HDMI 43
DE_BE0 44
DE_BE1 45
DE_FE1 46
DE_FE1 47
MP 50
GPU 52
DEU0 55
DEU1 56
DRC0 57
DRC1 58
* APB1 gates ("allwinner,sun6i-a31-apb1-gates-clk")
CODEC 0
DIGITAL MIC 4
PIO 5
DAUDIO0 12
DAUDIO1 13
* APB2 gates ("allwinner,sun6i-a31-apb2-gates-clk")
I2C0 0
I2C1 1
I2C2 2
I2C3 3
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/clock/sunxi/sun7i-a20-gates.txt deleted 100644 → 0
View file @ 21604cdc
Gate clock outputs
------------------
* AXI gates ("allwinner,sun4i-axi-gates-clk")
DRAM 0
* AHB gates ("allwinner,sun7i-a20-ahb-gates-clk")
USB0 0
EHCI0 1
OHCI0 2
EHCI1 3
OHCI1 4
SS 5
DMA 6
BIST 7
MMC0 8
MMC1 9
MMC2 10
MMC3 11
MS 12
NAND 13
SDRAM 14
ACE 16
EMAC 17
TS 18
SPI0 20
SPI1 21
SPI2 22
SPI3 23
SATA 25
HSTIMER 28
VE 32
TVD 33
TVE0 34
TVE1 35
LCD0 36
LCD1 37
CSI0 40
CSI1 41
HDMI1 42
HDMI0 43
DE_BE0 44
DE_BE1 45
DE_FE1 46
DE_FE1 47
GMAC 49
MP 50
MALI400 52
* APB0 gates ("allwinner,sun7i-a20-apb0-gates-clk")
CODEC 0
SPDIF 1
AC97 2
IIS0 3
IIS1 4
PIO 5
IR0 6
IR1 7
IIS2 8
KEYPAD 10
* APB1 gates ("allwinner,sun7i-a20-apb1-gates-clk")
I2C0 0
I2C1 1
I2C2 2
I2C3 3
CAN 4
SCR 5
PS20 6
PS21 7
I2C4 15
UART0 16
UART1 17
UART2 18
UART3 19
UART4 20
UART5 21
UART6 22
UART7 23
Notation:
[*]: The datasheet didn't mention these, but they are present on AW code
[**]: The datasheet had this marked as "NC" but they are used on AW code
Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-ic.txt
View file @ aac59e3e
......@@ -8,9 +8,6 @@ Required properties:
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The value shall be 1.
For the valid interrupt sources for your SoC, see the documentation in
sunxi/<soc>.txt
Example:
intc: interrupt-controller {
......
Documentation/devicetree/bindings/interrupt-controller/sunxi/sun4i-a10.txt deleted 100644 → 0
View file @ 21604cdc
Allwinner A10 (sun4i) interrupt sources
---------------------------------------
The interrupt sources available for the Allwinner A10 SoC are the
following one:
0: ENMI
1: UART0
2: UART1
3: UART2
4: UART3
5: IR0
6: IR1
7: I2C0
8: I2C1
9: I2C2
10: SPI0
11: SPI1
12: SPI2
13: SPDIF
14: AC97
15: TS
16: I2S
17: UART4
18: UART5
19: UART6
20: UART7
21: KEYPAD
22: TIMER0
23: TIMER1
24: TIMER2
25: TIMER3
26: CAN
27: DMA
28: PIO
29: TOUCH_PANEL
30: AUDIO_CODEC
31: LRADC
32: MMC0
33: MMC1
34: MMC2
35: MMC3
36: MEMSTICK
37: NAND
38: USB0
39: USB1
40: USB2
41: SCR
42: CSI0
43: CSI1
44: LCDCTRL0
45: LCDCTRL1
46: MP
47: DEFEBE0
48: DEFEBE1
49: PMU
50: SPI3
51: TZASC
52: PATA
53: VE
54: SS
55: EMAC
56: SATA
57: GPS
58: HDMI
59: TVE
60: ACE
61: TVD
62: PS2_0
63: PS2_1
64: USB3
65: USB4
66: PLE_PFM
67: TIMER4
68: TIMER5
69: GPU_GP
70: GPU_GPMMU
71: GPU_PP0
72: GPU_PPMMU0
73: GPU_PMU
74: GPU_RSV0
75: GPU_RSV1
76: GPU_RSV2
77: GPU_RSV3
78: GPU_RSV4
79: GPU_RSV5
80: GPU_RSV6
82: SYNC_TIMER0
83: SYNC_TIMER1
Documentation/devicetree/bindings/interrupt-controller/sunxi/sun5i-a13.txt deleted 100644 → 0
View file @ 21604cdc
Allwinner A13 (sun5i) interrupt sources
---------------------------------------
The interrupt sources available for the Allwinner A13 SoC are the
following one:
0: ENMI
2: UART1
4: UART3
5: IR
7: I2C0
8: I2C1
9: I2C2
10: SPI0
11: SPI1
12: SPI2
22: TIMER0
23: TIMER1
24: TIMER2
25: TIMER3
27: DMA
28: PIO
29: TOUCH_PANEL
30: AUDIO_CODEC
31: LRADC
32: MMC0
33: MMC1
34: MMC2
37: NAND
38: USB OTG
39: USB EHCI
40: USB OHCI
42: CSI
44: LCDCTRL
47: DEFEBE
49: PMU
53: VE
54: SS
66: PLE_PFM
67: TIMER4
68: TIMER5
69: GPU_GP
70: GPU_GPMMU
71: GPU_PP0
72: GPU_PPMMU0
73: GPU_PMU
74: GPU_RSV0
75: GPU_RSV1
76: GPU_RSV2
77: GPU_RSV3
78: GPU_RSV4
79: GPU_RSV5
80: GPU_RSV6
82: SYNC_TIMER0
83: SYNC_TIMER1
arch/arm/Kconfig
View file @ aac59e3e
......@@ -317,6 +317,7 @@ config ARCH_INTEGRATOR
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
select SPARSE_IRQ
select USE_OF
select VERSATILE_FPGA_IRQ
help
Support for ARM's Integrator platform.
......@@ -723,6 +724,7 @@ config ARCH_S3C64XX
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
......@@ -736,7 +738,6 @@ config ARCH_S3C64XX
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_WAKEMASK
select SAMSUNG_WDT_RESET
......
arch/arm/Kconfig.debug
View file @ aac59e3e
......@@ -386,6 +386,13 @@ choice
when u-boot hands over to the kernel, the system
silently crashes, with no serial output at all.
config DEBUG_VF_UART
bool "Vybrid UART"
depends on SOC_VF610
help
Say Y here if you want kernel low-level debugging support
on Vybrid based platforms.
config DEBUG_NOMADIK_UART
bool "Kernel low-level debugging messages via NOMADIK UART"
depends on ARCH_NOMADIK
......@@ -906,6 +913,7 @@ config DEBUG_LL_INCLUDE
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/ux500.S" if DEBUG_UX500_UART
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
default "debug/vf.S" if DEBUG_VF_UART
default "debug/vt8500.S" if DEBUG_VT8500_UART0
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
default "mach/debug-macro.S"
......
arch/arm/boot/dts/ecx-common.dtsi
View file @ aac59e3e
......@@ -19,6 +19,14 @@ chosen {
bootargs = "console=ttyAMA0";
};
psci {
compatible = "arm,psci";
method = "smc";
cpu_suspend = <0x84000002>;
cpu_off = <0x84000004>;
cpu_on = <0x84000006>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
......
arch/arm/boot/dts/imx6sl.dtsi
View file @ aac59e3e
......@@ -380,7 +380,9 @@ clks: ccm@020c4000 {
};
anatop: anatop@020c8000 {
compatible = "fsl,imx6sl-anatop", "syscon", "simple-bus";
compatible = "fsl,imx6sl-anatop",
"fsl,imx6q-anatop",
"syscon", "simple-bus";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
......
arch/arm/boot/dts/integrator.dtsi
View file @ aac59e3e
......@@ -5,6 +5,11 @@
/include/ "skeleton.dtsi"
/ {
core-module@10000000 {
compatible = "arm,core-module-integrator";
reg = <0x10000000 0x200>;
};
timer@13000000 {
reg = <0x13000000 0x100>;
interrupt-parent = <&pic>;
......
arch/arm/boot/dts/integratorap.dts
View file @ aac59e3e
......@@ -19,8 +19,11 @@ chosen {
};
syscon {
/* AP system controller registers */
compatible = "arm,integrator-ap-syscon";
reg = <0x11000000 0x100>;
interrupt-parent = <&pic>;
/* These are the logical module IRQs */
interrupts = <9>, <10>, <11>, <12>;
};
timer0: timer@13000000 {
......
arch/arm/boot/dts/integratorcp.dts
View file @ aac59e3e
......@@ -13,8 +13,8 @@ chosen {
bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
};
cpcon {
/* CP controller registers */
syscon {
compatible = "arm,integrator-cp-syscon";
reg = <0xcb000000 0x100>;
};
......
arch/arm/boot/dts/keystone-clocks.dtsi 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/boot/dts/keystone.dts
View file @ aac59e3e
......@@ -100,13 +100,15 @@ rstctrl: reset-controller {
reg = <0x023100e8 4>; /* pll reset control reg */
};
/include/ "keystone-clocks.dtsi"
uart0: serial@02530c00 {
compatible = "ns16550a";
current-speed = <115200>;
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02530c00 0x100>;
clock-frequency = <133120000>;
clocks = <&clkuart0>;
interrupts = <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>;
};
......@@ -116,9 +118,66 @@ uart1: serial@02531000 {
reg-shift = <2>;
reg-io-width = <4>;
reg = <0x02531000 0x100>;
clock-frequency = <133120000>;
clocks = <&clkuart1>;
interrupts = <GIC_SPI 280 IRQ_TYPE_EDGE_RISING>;
};
i2c0: i2c@2530000 {
compatible = "ti,davinci-i2c";
reg = <0x02530000 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 283 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
dtt@50 {
compatible = "at,24c1024";
reg = <0x50>;
};
};
i2c1: i2c@2530400 {
compatible = "ti,davinci-i2c";
reg = <0x02530400 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 286 IRQ_TYPE_EDGE_RISING>;
};
i2c2: i2c@2530800 {
compatible = "ti,davinci-i2c";
reg = <0x02530800 0x400>;
clock-frequency = <100000>;
clocks = <&clki2c>;
interrupts = <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>;
};
spi0: spi@21000400 {
compatible = "ti,dm6441-spi";
reg = <0x21000400 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
};
spi1: spi@21000600 {
compatible = "ti,dm6441-spi";
reg = <0x21000600 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
};
spi2: spi@21000800 {
compatible = "ti,dm6441-spi";
reg = <0x21000800 0x200>;
num-cs = <4>;
ti,davinci-spi-intr-line = <0>;
interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkspi>;
};
};
};
arch/arm/boot/dts/r7s72100.dtsi 0 → 100644
View file @ aac59e3e
/*
* Device Tree Source for the r7s72100 SoC
*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r7s72100";
interrupt-parent = <&gic>;
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
};
gic: interrupt-controller@e8201000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0xe8201000 0x1000>,
<0xe8202000 0x1000>;
};
};
arch/arm/boot/dts/r8a7791.dtsi 0 → 100644
View file @ aac59e3e
/*
* Device Tree Source for the r8a7791 SoC
*
* Copyright (C) 2013 Renesas Electronics Corporation
* Copyright (C) 2013 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/ {
compatible = "renesas,r8a7791";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1300000000>;
};
};
gic: interrupt-controller@f1001000 {
compatible = "arm,cortex-a15-gic";
#interrupt-cells = <3>;
#address-cells = <0>;
interrupt-controller;
reg = <0 0xf1001000 0 0x1000>,
<0 0xf1002000 0 0x1000>,
<0 0xf1004000 0 0x2000>,
<0 0xf1006000 0 0x2000>;
interrupts = <1 9 0xf04>;
};
};
arch/arm/configs/bcm_defconfig
View file @ aac59e3e
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
......@@ -25,10 +24,9 @@ CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_EFI_PARTITION=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_MOBILE=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
......@@ -50,7 +48,6 @@ CONFIG_UNIX_DIAG=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
......@@ -95,7 +92,6 @@ CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_BLOCK_MINORS=32
CONFIG_MMC_TEST=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_BCM_KONA=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
......@@ -117,12 +113,12 @@ CONFIG_CONFIGFS_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
CONFIG_DEBUG_INFO=y
# CONFIG_FTRACE is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
......
arch/arm/configs/imx_v6_v7_defconfig
View file @ aac59e3e
......@@ -132,7 +132,6 @@ CONFIG_TOUCHSCREEN_MC13783=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_MMA8450=y
CONFIG_SERIO_SERPORT=m
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_IMX=y
......@@ -188,22 +187,33 @@ CONFIG_SND_SOC_PHYCORE_AC97=y
CONFIG_SND_SOC_EUKREA_TLV320=y
CONFIG_SND_SOC_IMX_WM8962=y
CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_IMX_MC13783=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_PHY=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_ONESHOT=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_MC13XXX=y
......@@ -246,7 +256,6 @@ CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=m
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
CONFIG_NFS_FS=y
......@@ -261,6 +270,7 @@ CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_FTRACE is not set
# CONFIG_ARM_UNWIND is not set
......
arch/arm/configs/integrator_defconfig
View file @ aac59e3e
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_TINY_RCU=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_INTEGRATOR_IMPD1=y
CONFIG_CPU_ARM720T=y
CONFIG_CPU_ARM920T=y
CONFIG_CPU_ARM922T=y
......@@ -18,12 +20,9 @@ CONFIG_CPU_ARM1020=y
CONFIG_CPU_ARM1022=y
CONFIG_CPU_ARM1026=y
CONFIG_PCI=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
# CONFIG_ATAGS is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,38400n8 root=/dev/nfs ip=bootp"
......@@ -44,24 +43,20 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_AFS_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=y
CONFIG_SMC91X=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIAL_AMBA_PL010=y
CONFIG_SERIAL_AMBA_PL010_CONSOLE=y
CONFIG_FB=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_ARMCLCD=y
......@@ -71,19 +66,23 @@ CONFIG_FB_MATROX_MYSTIQUE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL030=y
CONFIG_COMMON_CLK_DEBUG=y
CONFIG_EXT2_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
......
arch/arm/configs/keystone_defconfig
View file @ aac59e3e
......@@ -123,7 +123,9 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_DAVINCI=y
CONFIG_SPI=y
CONFIG_SPI_DAVINCI=y
CONFIG_SPI_SPIDEV=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
......
arch/arm/configs/multi_v7_defconfig
View file @ aac59e3e
......@@ -6,6 +6,7 @@ CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_ARCH_BCM=y
CONFIG_ARCH_BCM_MOBILE=y
CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_HIGHBANK=y
CONFIG_ARCH_KEYSTONE=y
......
arch/arm/configs/mxs_defconfig
View file @ aac59e3e
......@@ -76,7 +76,6 @@ CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_TSC2007=m
# CONFIG_SERIO is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_DEVKMEM is not set
......@@ -91,7 +90,6 @@ CONFIG_I2C_MXS=y
CONFIG_SPI=y
CONFIG_SPI_GPIO=m
CONFIG_SPI_MXS=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
......@@ -115,9 +113,12 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_PHY=y
CONFIG_USB_MXS_PHY=y
CONFIG_USB_GADGET=y
CONFIG_USB_ETH=m
CONFIG_USB_MASS_STORAGE=m
CONFIG_MMC=y
CONFIG_MMC_UNSAFE_RESUME=y
CONFIG_MMC_MXS=y
......
arch/arm/configs/sunxi_defconfig 0 → 100644
View file @ aac59e3e
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_ARCH_SUNXI=y
CONFIG_SMP=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_NETDEVICES=y
CONFIG_SUN4I_EMAC=y
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_WLAN is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
CONFIG_SERIAL_8250_DW=y
CONFIG_I2C=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_COMMON_CLK_DEBUG=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_NLS=y
arch/arm/configs/vexpress_defconfig
View file @ aac59e3e
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
......@@ -8,11 +7,9 @@ CONFIG_CGROUPS=y
CONFIG_CPUSETS=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_MODULES=y
......@@ -23,14 +20,22 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_VEXPRESS_CA9X4=y
CONFIG_ARCH_VEXPRESS_DCSCB=y
CONFIG_ARCH_VEXPRESS_TC2_PM=y
# CONFIG_SWP_EMULATE is not set
CONFIG_SMP=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_MCPM=y
CONFIG_VMSPLIT_2G=y
CONFIG_HOTPLUG_CPU=y
CONFIG_NR_CPUS=8
CONFIG_ARM_PSCI=y
CONFIG_AEABI=y
CONFIG_CMA=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M"
CONFIG_CMDLINE="console=ttyAMA0"
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
......@@ -44,37 +49,46 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ARM_INTEGRATOR=y
CONFIG_MISC_DEVICES=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_PLATRAM=y
CONFIG_MTD_UBI=y
CONFIG_PROC_DEVICETREE=y
CONFIG_VIRTIO_BLK=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_ATA=y
# CONFIG_SATA_PMP is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_VIRTIO_NET=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_I2C=y
CONFIG_I2C_VERSATILE=y
CONFIG_SENSORS_VEXPRESS=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_VEXPRESS=y
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
CONFIG_FRAMEBUFFER_CONSOLE=y
......@@ -103,38 +117,45 @@ CONFIG_HID_THRUSTMASTER=y
CONFIG_HID_ZEROPLUS=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_MON=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_PL031=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_9P_FS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
arch/arm/include/debug/vf.S 0 → 100644
View file @ aac59e3e
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
.macro addruart, rp, rv, tmp
ldr \rp, =0x40028000 @ physical
ldr \rv, =0xfe028000 @ virtual
.endm
.macro senduart, rd, rx
strb \rd, [\rx, #0x7] @ Data Register
.endm
.macro busyuart, rd, rx
1001: ldrb \rd, [\rx, #0x4] @ Status Register 1
tst \rd, #1 << 6 @ TC
beq 1001b @ wait until transmit done
.endm
.macro waituart,rd,rx
.endm
arch/arm/kernel/psci_smp.c
View file @ aac59e3e
......@@ -14,7 +14,6 @@
*/
#include <linux/init.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/smp.h>
#include <linux/of.h>
......
arch/arm/mach-bcm/Kconfig
View file @ aac59e3e
config ARCH_BCM
bool "Broadcom SoC" if ARCH_MULTI_V7
bool "Broadcom SoC Support"
depends on ARCH_MULTIPLATFORM
help
This enables support for Broadcom ARM based SoC
chips
if ARCH_BCM
menu "Broadcom SoC Selection"
config ARCH_BCM_MOBILE
bool "Broadcom Mobile SoC" if ARCH_MULTI_V7
depends on MMU
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
......@@ -9,12 +20,17 @@ config ARCH_BCM
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
select GENERIC_TIME
select GPIO_BCM
select GPIO_BCM_KONA
select SPARSE_IRQ
select TICK_ONESHOT
select CACHE_L2X0
select HAVE_ARM_ARCH_TIMER
help
This enables support for system based on Broadcom SoCs.
This enables support for systems based on Broadcom mobile SoCs.
It currently supports the 'BCM281XX' family, which includes
BCM11130, BCM11140, BCM11351, BCM28145 and
BCM28155 variants.
endmenu
endif
arch/arm/mach-bcm/Makefile
View file @ aac59e3e
......@@ -10,6 +10,6 @@
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
obj-$(CONFIG_ARCH_BCM) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
arch/arm/mach-bcm/board_bcm281xx.c
View file @ aac59e3e
......@@ -67,7 +67,7 @@ static void __init board_init(void)
static const char * const bcm11351_dt_compat[] = { "brcm,bcm11351", NULL, };
DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
DT_MACHINE_START(BCM11351_DT, "BCM281xx Broadcom Application Processor")
.init_machine = board_init,
.restart = bcm_kona_restart,
.dt_compat = bcm11351_dt_compat,
......
arch/arm/mach-davinci/board-da830-evm.c
View file @ aac59e3e
......@@ -74,7 +74,7 @@ static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
if (handler != NULL) {
da830_evm_usb_ocic_handler = handler;
error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
error = request_irq(irq, da830_evm_usb_ocic_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"OHCI over-current indicator", NULL);
if (error)
......
arch/arm/mach-davinci/board-omapl138-hawk.c
View file @ aac59e3e
......@@ -211,7 +211,7 @@ static int hawk_usb_ocic_notify(da8xx_ocic_handler_t handler)
hawk_usb_ocic_handler = handler;
error = request_irq(irq, omapl138_hawk_usb_ocic_irq,
IRQF_DISABLED | IRQF_TRIGGER_RISING |
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"OHCI over-current indicator", NULL);
if (error)
......
arch/arm/mach-davinci/time.c
View file @ aac59e3e
......@@ -181,7 +181,7 @@ static struct timer_s timers[] = {
.name = "clockevent",
.opts = TIMER_OPTS_DISABLED,
.irqaction = {
.flags = IRQF_DISABLED | IRQF_TIMER,
.flags = IRQF_TIMER,
.handler = timer_interrupt,
}
},
......@@ -190,7 +190,7 @@ static struct timer_s timers[] = {
.period = ~0,
.opts = TIMER_OPTS_PERIODIC,
.irqaction = {
.flags = IRQF_DISABLED | IRQF_TIMER,
.flags = IRQF_TIMER,
.handler = freerun_interrupt,
}
},
......@@ -331,7 +331,6 @@ static void davinci_set_mode(enum clock_event_mode mode,
static struct clock_event_device clockevent_davinci = {
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_next_event = davinci_set_next_event,
.set_mode = davinci_set_mode,
};
......@@ -397,14 +396,10 @@ void __init davinci_timer_init(void)
/* setup clockevent */
clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
clockevent_davinci.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_davinci);
clockevents_config_and_register(&clockevent_davinci,
davinci_clock_tick_rate, 1, 0xfffffffe);
for (i=0; i< ARRAY_SIZE(timers); i++)
timer32_config(&timers[i]);
......
arch/arm/mach-highbank/Kconfig
View file @ aac59e3e
......@@ -10,6 +10,7 @@ config ARCH_HIGHBANK
select ARM_ERRATA_775420
select ARM_ERRATA_798181
select ARM_GIC
select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
select COMMON_CLK
......
arch/arm/mach-highbank/Makefile
View file @ aac59e3e
......@@ -3,6 +3,4 @@ obj-y := highbank.o system.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_PM_SLEEP) += pm.o
arch/arm/mach-highbank/core.h
View file @ aac59e3e
......@@ -3,7 +3,6 @@
#include <linux/reboot.h>
extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
extern void highbank_restart(enum reboot_mode, const char *);
extern void __iomem *scu_base_addr;
......@@ -14,8 +13,5 @@ static inline void highbank_pm_init(void) {}
#endif
extern void highbank_smc1(int fn, int arg);
extern void highbank_cpu_die(unsigned int cpu);
extern struct smp_operations highbank_smp_ops;
#endif
arch/arm/mach-highbank/highbank.c
View file @ aac59e3e
......@@ -24,10 +24,9 @@
#include <linux/of_platform.h>
#include <linux/of_address.h>
#include <linux/amba/bus.h>
#include <linux/platform_device.h>
#include <asm/cacheflush.h>
#include <asm/cputype.h>
#include <asm/smp_plat.h>
#include <asm/psci.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
......@@ -48,17 +47,6 @@ static void __init highbank_scu_map_io(void)
scu_base_addr = ioremap(base, SZ_4K);
}
#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
HB_JUMP_TABLE_PHYS(cpu) + 15);
}
static void highbank_l2x0_disable(void)
{
......@@ -138,6 +126,10 @@ static struct notifier_block highbank_platform_nb = {
.notifier_call = highbank_platform_notifier,
};
static struct platform_device highbank_cpuidle_device = {
.name = "cpuidle-calxeda",
};
static void __init highbank_init(void)
{
struct device_node *np;
......@@ -154,6 +146,9 @@ static void __init highbank_init(void)
bus_register_notifier(&amba_bustype, &highbank_amba_nb);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
if (psci_ops.cpu_suspend)
platform_device_register(&highbank_cpuidle_device);
}
static const char *highbank_match[] __initconst = {
......@@ -166,7 +161,6 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
#if defined(CONFIG_ZONE_DMA) && defined(CONFIG_ARM_LPAE)
.dma_zone_size = (4ULL * SZ_1G),
#endif
.smp = smp_ops(highbank_smp_ops),
.init_irq = highbank_init_irq,
.init_machine = highbank_init,
.dt_compat = highbank_match,
......
arch/arm/mach-highbank/hotplug.c deleted 100644 → 0
View file @ 21604cdc
/*
* Copyright 2011 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <asm/cacheflush.h>
#include "core.h"
#include "sysregs.h"
extern void secondary_startup(void);
/*
* platform-specific code to shutdown a CPU
*
*/
void __ref highbank_cpu_die(unsigned int cpu)
{
highbank_set_cpu_jump(cpu, phys_to_virt(0));
flush_cache_louis();
highbank_set_core_pwr();
while (1)
cpu_do_idle();
}
arch/arm/mach-highbank/platsmp.c deleted 100644 → 0
View file @ 21604cdc
/*
* Copyright 2010-2011 Calxeda, Inc.
* Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <asm/smp_scu.h>
#include "core.h"
extern void secondary_startup(void);
static int highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
highbank_set_cpu_jump(cpu, secondary_startup);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
static void __init highbank_smp_init_cpus(void)
{
unsigned int i, ncores = 4;
/* sanity check */
if (ncores > NR_CPUS) {
printk(KERN_WARNING
"highbank: no. of cores (%d) greater than configured "
"maximum of %d - clipping\n",
ncores, NR_CPUS);
ncores = NR_CPUS;
}
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
}
static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
if (scu_base_addr)
scu_enable(scu_base_addr);
}
struct smp_operations highbank_smp_ops __initdata = {
.smp_init_cpus = highbank_smp_init_cpus,
.smp_prepare_cpus = highbank_smp_prepare_cpus,
.smp_boot_secondary = highbank_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = highbank_cpu_die,
#endif
};
arch/arm/mach-highbank/pm.c
View file @ aac59e3e
......@@ -16,27 +16,19 @@
#include <linux/cpu_pm.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include "core.h"
#include "sysregs.h"
#include <asm/psci.h>
static int highbank_suspend_finish(unsigned long val)
{
outer_flush_all();
outer_disable();
highbank_set_pwr_suspend();
cpu_do_idle();
const struct psci_power_state ps = {
.type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
.affinity_level = 1,
};
highbank_clear_pwr_request();
return 0;
return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
}
static int highbank_pm_enter(suspend_state_t state)
......@@ -44,15 +36,11 @@ static int highbank_pm_enter(suspend_state_t state)
cpu_pm_enter();
cpu_cluster_pm_enter();
highbank_set_cpu_jump(0, cpu_resume);
cpu_suspend(0, highbank_suspend_finish);
cpu_cluster_pm_exit();
cpu_pm_exit();
highbank_smc1(0x102, 0x1);
if (scu_base_addr)
scu_enable(scu_base_addr);
return 0;
}
......@@ -63,5 +51,8 @@ static const struct platform_suspend_ops highbank_pm_ops = {
void __init highbank_pm_init(void)
{
if (!psci_ops.cpu_suspend)
return;
suspend_set_ops(&highbank_pm_ops);
}
arch/arm/mach-imx/Kconfig
View file @ aac59e3e
......@@ -11,6 +11,7 @@ config ARCH_MXC
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
select SOC_BUS
select SPARSE_IRQ
select USE_OF
help
......@@ -24,7 +25,7 @@ config MXC_IRQ_PRIOR
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
by lower priority IRQ even IRQF_DISABLED flag is not set.
by lower priority IRQ.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
......@@ -793,6 +794,8 @@ config SOC_IMX6Q
select HAVE_IMX_SRC
select HAVE_SMP
select MFD_SYSCON
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
select PINCTRL
select PINCTRL_IMX6Q
select PL310_ERRATA_588369 if CACHE_PL310
......
arch/arm/mach-imx/Makefile
View file @ aac59e3e
......@@ -102,6 +102,8 @@ obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
# i.MX6SL reuses pm-imx6q.c
obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o
endif
# i.MX5 based machines
......
arch/arm/mach-imx/anatop.c
View file @ aac59e3e
......@@ -16,6 +16,7 @@
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include "common.h"
#include "hardware.h"
#define REG_SET 0x4
#define REG_CLR 0x8
......@@ -26,6 +27,7 @@
#define ANADIG_USB1_CHRG_DETECT 0x1b0
#define ANADIG_USB2_CHRG_DETECT 0x210
#define ANADIG_DIGPROG 0x260
#define ANADIG_DIGPROG_IMX6SL 0x280
#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
......@@ -76,21 +78,38 @@ static void imx_anatop_usb_chrg_detect_disable(void)
BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
}
u32 imx_anatop_get_digprog(void)
void __init imx_init_revision_from_anatop(void)
{
struct device_node *np;
void __iomem *anatop_base;
static u32 digprog;
if (digprog)
return digprog;
unsigned int revision;
u32 digprog;
u16 offset = ANADIG_DIGPROG;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
anatop_base = of_iomap(np, 0);
WARN_ON(!anatop_base);
digprog = readl_relaxed(anatop_base + ANADIG_DIGPROG);
if (of_device_is_compatible(np, "fsl,imx6sl-anatop"))
offset = ANADIG_DIGPROG_IMX6SL;
digprog = readl_relaxed(anatop_base + offset);
iounmap(anatop_base);
switch (digprog & 0xff) {
case 0:
revision = IMX_CHIP_REVISION_1_0;
break;
case 1:
revision = IMX_CHIP_REVISION_1_1;
break;
case 2:
revision = IMX_CHIP_REVISION_1_2;
break;
default:
revision = IMX_CHIP_REVISION_UNKNOWN;
}
return digprog;
mxc_set_cpu_type(digprog >> 16 & 0xff);
imx_set_soc_revision(revision);
}
void __init imx_anatop_init(void)
......
arch/arm/mach-imx/clk-imx51-imx53.c
View file @ aac59e3e
......@@ -14,6 +14,9 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include "crm-regs-imx5.h"
#include "clk.h"
......@@ -472,8 +475,9 @@ CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init_dt);
static void __init mx53_clocks_init(struct device_node *np)
{
int i;
int i, irq;
unsigned long r;
void __iomem *base;
clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
......@@ -559,14 +563,17 @@ static void __init mx53_clocks_init(struct device_node *np)
clk_set_rate(clk[esdhc_a_podf], 200000000);
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
clk_disable_unprepare(clk[iim_gate]);
r = clk_round_rate(clk[usboh3_per_gate], 54000000);
clk_set_rate(clk[usboh3_per_gate], r);
np = of_find_compatible_node(NULL, NULL, "fsl,imx53-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
mxc_timer_init(base, irq);
}
CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);
arch/arm/mach-imx/clk-imx6q.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-imx/clk-imx6sl.c
View file @ aac59e3e
......@@ -127,6 +127,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
base = of_iomap(np, 0);
WARN_ON(!base);
/* Reuse imx6q pm code */
imx6q_pm_set_ccm_base(base);
/* name reg shift width parent_names num_parents */
clks[IMX6SL_CLK_STEP] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
clks[IMX6SL_CLK_PLL1_SW] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
......
arch/arm/mach-imx/common.h
View file @ aac59e3e
......@@ -13,70 +13,73 @@
#include <linux/reboot.h>
struct irq_data;
struct platform_device;
struct pt_regs;
struct clk;
enum mxc_cpu_pwr_mode;
extern void mx1_map_io(void);
extern void mx21_map_io(void);
extern void mx25_map_io(void);
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
extern void mx51_map_io(void);
extern void mx53_map_io(void);
extern void imx1_init_early(void);
extern void imx21_init_early(void);
extern void imx25_init_early(void);
extern void imx27_init_early(void);
extern void imx31_init_early(void);
extern void imx35_init_early(void);
extern void imx51_init_early(void);
extern void imx53_init_early(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
extern void mx1_init_irq(void);
extern void mx21_init_irq(void);
extern void mx25_init_irq(void);
extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
extern void mx51_init_irq(void);
extern void mx53_init_irq(void);
extern void imx1_soc_init(void);
extern void imx21_soc_init(void);
extern void imx25_soc_init(void);
extern void imx27_soc_init(void);
extern void imx31_soc_init(void);
extern void imx35_soc_init(void);
extern void imx51_soc_init(void);
extern void imx51_init_late(void);
extern void imx53_init_late(void);
extern void epit_timer_init(void __iomem *base, int irq);
extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
extern int mx25_clocks_init(void);
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
extern int mx35_clocks_init(void);
extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
void mx1_map_io(void);
void mx21_map_io(void);
void mx25_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void mx51_map_io(void);
void mx53_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
void imx51_init_early(void);
void imx53_init_early(void);
void mxc_init_irq(void __iomem *);
void tzic_init_irq(void __iomem *);
void mx1_init_irq(void);
void mx21_init_irq(void);
void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void mx51_init_irq(void);
void mx53_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
void imx51_soc_init(void);
void imx51_init_late(void);
void imx53_init_late(void);
void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
extern int mx25_clocks_init_dt(void);
extern int mx27_clocks_init_dt(void);
extern int mx31_clocks_init_dt(void);
extern struct platform_device *mxc_register_gpio(char *name, int id,
int mx25_clocks_init_dt(void);
int mx27_clocks_init_dt(void);
int mx31_clocks_init_dt(void);
struct platform_device *mxc_register_gpio(char *name, int id,
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_restart(enum reboot_mode, const char *);
extern void mxc_arch_reset_init(void __iomem *);
extern void mxc_arch_reset_init_dt(void);
extern int mx53_revision(void);
extern int imx6q_revision(void);
extern int mx53_display_revision(void);
extern void imx_set_aips(void __iomem *);
extern int mxc_device_init(void);
void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
void mxc_arch_reset_init_dt(void);
int mx53_revision(void);
void imx_set_aips(void __iomem *);
int mxc_device_init(void);
void imx_set_soc_revision(unsigned int rev);
unsigned int imx_get_soc_revision(void);
void imx_init_revision_from_anatop(void);
struct device *imx_soc_device_init(void);
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */
......@@ -93,8 +96,8 @@ enum mx3_cpu_pwr_mode {
MX3_SLEEP,
};
extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
extern void imx_print_silicon_rev(const char *cpu, int srev);
void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
void imx_print_silicon_rev(const char *cpu, int srev);
void avic_handle_irq(struct pt_regs *);
void tzic_handle_irq(struct pt_regs *);
......@@ -108,54 +111,61 @@ void tzic_handle_irq(struct pt_regs *);
#define imx51_handle_irq tzic_handle_irq
#define imx53_handle_irq tzic_handle_irq
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern u32 imx_get_cpu_arg(int cpu);
extern void imx_set_cpu_arg(int cpu, u32 arg);
extern void v7_cpu_resume(void);
void imx_enable_cpu(int cpu, bool enable);
void imx_set_cpu_jump(int cpu, void *jump_addr);
u32 imx_get_cpu_arg(int cpu);
void imx_set_cpu_arg(int cpu, u32 arg);
void v7_cpu_resume(void);
#ifdef CONFIG_SMP
extern void v7_secondary_startup(void);
extern void imx_scu_map_io(void);
extern void imx_smp_prepare(void);
extern void imx_scu_standby_enable(void);
void v7_secondary_startup(void);
void imx_scu_map_io(void);
void imx_smp_prepare(void);
void imx_scu_standby_enable(void);
#else
static inline void imx_scu_map_io(void) {}
static inline void imx_smp_prepare(void) {}
static inline void imx_scu_standby_enable(void) {}
#endif
extern void imx_src_init(void);
extern void imx_src_prepare_restart(void);
extern void imx_gpc_init(void);
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
extern void imx_gpc_mask_all(void);
extern void imx_gpc_restore_all(void);
extern void imx_anatop_init(void);
extern void imx_anatop_pre_suspend(void);
extern void imx_anatop_post_resume(void);
extern u32 imx_anatop_get_digprog(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
extern void imx6q_set_chicken_bit(void);
extern void imx_cpu_die(unsigned int cpu);
extern int imx_cpu_kill(unsigned int cpu);
void imx_src_init(void);
#ifdef CONFIG_HAVE_IMX_SRC
void imx_src_prepare_restart(void);
#else
static inline void imx_src_prepare_restart(void) {}
#endif
void imx_gpc_init(void);
void imx_gpc_pre_suspend(void);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
void imx_gpc_restore_all(void);
void imx_gpc_irq_mask(struct irq_data *d);
void imx_gpc_irq_unmask(struct irq_data *d);
void imx_anatop_init(void);
void imx_anatop_pre_suspend(void);
void imx_anatop_post_resume(void);
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
void imx6q_set_chicken_bit(void);
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
extern void imx5_pm_init(void);
void imx6q_pm_init(void);
void imx6q_pm_set_ccm_base(void __iomem *base);
void imx5_pm_init(void);
#else
static inline void imx6q_pm_init(void) {}
static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
static inline void imx5_pm_init(void) {}
#endif
#ifdef CONFIG_NEON
extern int mx51_neon_fixup(void);
int mx51_neon_fixup(void);
#else
static inline int mx51_neon_fixup(void) { return 0; }
#endif
#ifdef CONFIG_CACHE_L2X0
extern void imx_init_l2cache(void);
void imx_init_l2cache(void);
#else
static inline void imx_init_l2cache(void) {}
#endif
......
arch/arm/mach-imx/cpu.c
View file @ aac59e3e
#include <linux/err.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
#include "hardware.h"
#include "common.h"
......@@ -8,11 +11,23 @@
unsigned int __mxc_cpu_type;
EXPORT_SYMBOL(__mxc_cpu_type);
static unsigned int imx_soc_revision;
void mxc_set_cpu_type(unsigned int type)
{
__mxc_cpu_type = type;
}
void imx_set_soc_revision(unsigned int rev)
{
imx_soc_revision = rev;
}
unsigned int imx_get_soc_revision(void)
{
return imx_soc_revision;
}
void imx_print_silicon_rev(const char *cpu, int srev)
{
if (srev == IMX_CHIP_REVISION_UNKNOWN)
......@@ -44,3 +59,81 @@ void __init imx_set_aips(void __iomem *base)
reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
__raw_writel(reg, base + 0x50);
}
struct device * __init imx_soc_device_init(void)
{
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
struct device_node *root;
const char *soc_id;
int ret;
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return NULL;
soc_dev_attr->family = "Freescale i.MX";
root = of_find_node_by_path("/");
ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
of_node_put(root);
if (ret)
goto free_soc;
switch (__mxc_cpu_type) {
case MXC_CPU_MX1:
soc_id = "i.MX1";
break;
case MXC_CPU_MX21:
soc_id = "i.MX21";
break;
case MXC_CPU_MX25:
soc_id = "i.MX25";
break;
case MXC_CPU_MX27:
soc_id = "i.MX27";
break;
case MXC_CPU_MX31:
soc_id = "i.MX31";
break;
case MXC_CPU_MX35:
soc_id = "i.MX35";
break;
case MXC_CPU_MX51:
soc_id = "i.MX51";
break;
case MXC_CPU_MX53:
soc_id = "i.MX53";
break;
case MXC_CPU_IMX6SL:
soc_id = "i.MX6SL";
break;
case MXC_CPU_IMX6DL:
soc_id = "i.MX6DL";
break;
case MXC_CPU_IMX6Q:
soc_id = "i.MX6Q";
break;
default:
soc_id = "Unknown";
}
soc_dev_attr->soc_id = soc_id;
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
(imx_soc_revision >> 4) & 0xf,
imx_soc_revision & 0xf);
if (!soc_dev_attr->revision)
goto free_soc;
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev))
goto free_rev;
return soc_device_to_device(soc_dev);
free_rev:
kfree(soc_dev_attr->revision);
free_soc:
kfree(soc_dev_attr);
return NULL;
}
arch/arm/mach-imx/epit.c
View file @ aac59e3e
......@@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
static struct irqaction epit_timer_irq = {
.name = "i.MX EPIT Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = epit_timer_interrupt,
};
......
arch/arm/mach-imx/gpc.c
View file @ aac59e3e
......@@ -90,7 +90,7 @@ void imx_gpc_restore_all(void)
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
static void imx_gpc_irq_unmask(struct irq_data *d)
void imx_gpc_irq_unmask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
......@@ -105,7 +105,7 @@ static void imx_gpc_irq_unmask(struct irq_data *d)
writel_relaxed(val, reg);
}
static void imx_gpc_irq_mask(struct irq_data *d)
void imx_gpc_irq_mask(struct irq_data *d)
{
void __iomem *reg;
u32 val;
......
arch/arm/mach-imx/hotplug.c
View file @ aac59e3e
......@@ -52,7 +52,9 @@ void imx_cpu_die(unsigned int cpu)
* the register being cleared to kill the cpu.
*/
imx_set_cpu_arg(cpu, ~0);
cpu_do_idle();
while (1)
cpu_do_idle();
}
int imx_cpu_kill(unsigned int cpu)
......
arch/arm/mach-imx/mach-armadillo5x0.c
View file @ aac59e3e
......@@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev,
/* When supported the trigger type have to be BOTH */
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
detect_irq, IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
......
arch/arm/mach-imx/mach-imx6q.c
View file @ aac59e3e
......@@ -13,7 +13,6 @@
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/cpu.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/init.h>
#include <linux/io.h>
......@@ -38,64 +37,6 @@
#include "cpuidle.h"
#include "hardware.h"
static u32 chip_revision;
int imx6q_revision(void)
{
return chip_revision;
}
static void __init imx6q_init_revision(void)
{
u32 rev = imx_anatop_get_digprog();
switch (rev & 0xff) {
case 0:
chip_revision = IMX_CHIP_REVISION_1_0;
break;
case 1:
chip_revision = IMX_CHIP_REVISION_1_1;
break;
case 2:
chip_revision = IMX_CHIP_REVISION_1_2;
break;
default:
chip_revision = IMX_CHIP_REVISION_UNKNOWN;
}
mxc_set_cpu_type(rev >> 16 & 0xff);
}
static void imx6q_restart(enum reboot_mode mode, const char *cmd)
{
struct device_node *np;
void __iomem *wdog_base;
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-wdt");
wdog_base = of_iomap(np, 0);
if (!wdog_base)
goto soft;
imx_src_prepare_restart();
/* enable wdog */
writew_relaxed(1 << 2, wdog_base);
/* write twice to ensure the request will not get ignored */
writew_relaxed(1 << 2, wdog_base);
/* wait for reset to assert ... */
mdelay(500);
pr_err("Watchdog reset failed to assert reset\n");
/* delay to allow the serial port to show the message */
mdelay(50);
soft:
/* we'll take a jump through zero as a poor second */
soft_restart(0);
}
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
......@@ -190,12 +131,20 @@ static void __init imx6q_1588_init(void)
static void __init imx6q_init_machine(void)
{
struct device *parent;
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
imx6q_revision());
imx_get_soc_revision());
mxc_arch_reset_init_dt();
parent = imx_soc_device_init();
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
imx6q_enet_phy_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx_anatop_init();
imx6q_pm_init();
......@@ -270,7 +219,7 @@ static void __init imx6q_init_late(void)
* WAIT mode is broken on TO 1.0 and 1.1, so there is no point
* to run cpuidle on them.
*/
if (imx6q_revision() > IMX_CHIP_REVISION_1_1)
if (imx_get_soc_revision() > IMX_CHIP_REVISION_1_1)
imx6q_cpuidle_init();
if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ)) {
......@@ -287,7 +236,7 @@ static void __init imx6q_map_io(void)
static void __init imx6q_init_irq(void)
{
imx6q_init_revision();
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
imx_gpc_init();
......@@ -307,5 +256,5 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad/DualLite (Device Tree)")
.init_machine = imx6q_init_machine,
.init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
.restart = imx6q_restart,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/mach-imx6sl.c
View file @ aac59e3e
......@@ -10,20 +10,51 @@
#include <linux/irqchip.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/regmap.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
static void __init imx6sl_fec_init(void)
{
struct regmap *gpr;
/* set FEC clock from internal PLL clock source */
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sl-iomuxc-gpr");
if (!IS_ERR(gpr)) {
regmap_update_bits(gpr, IOMUXC_GPR1,
IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK, 0);
regmap_update_bits(gpr, IOMUXC_GPR1,
IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK, 0);
} else {
pr_err("failed to find fsl,imx6sl-iomux-gpr regmap\n");
}
}
static void __init imx6sl_init_machine(void)
{
struct device *parent;
mxc_arch_reset_init_dt();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
parent = imx_soc_device_init();
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx6sl_fec_init();
imx_anatop_init();
/* Reuse imx6q pm code */
imx6q_pm_init();
}
static void __init imx6sl_init_irq(void)
{
imx_init_revision_from_anatop();
imx_init_l2cache();
imx_src_init();
imx_gpc_init();
......
arch/arm/mach-imx/mach-mx31_3ds.c
View file @ aac59e3e
......@@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev,
}
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
detect_irq, IRQF_DISABLED |
detect_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
if (ret) {
......
arch/arm/mach-imx/mach-pcm037.c
View file @ aac59e3e
......@@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
#endif
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
IRQF_TRIGGER_FALLING, "sdhc-detect", data);
if (ret)
goto err_gpio_free_2;
......
arch/arm/mach-imx/mm-imx5.c
View file @ aac59e3e
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/pinctrl/machine.h>
#include <linux/of_address.h>
#include <asm/mach/map.h>
......@@ -88,8 +89,15 @@ void __init imx51_init_early(void)
void __init imx53_init_early(void)
{
struct device_node *np;
void __iomem *base;
mxc_set_cpu_type(MXC_CPU_MX53);
mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR));
np = of_find_compatible_node(NULL, NULL, "fsl,imx53-iomuxc");
base = of_iomap(np, 0);
WARN_ON(!base);
mxc_iomux_v3_init(base);
imx_src_init();
}
......@@ -100,7 +108,14 @@ void __init mx51_init_irq(void)
void __init mx53_init_irq(void)
{
tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
struct device_node *np;
void __iomem *base;
np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic");
base = of_iomap(np, 0);
WARN_ON(!base);
tzic_init_irq(base);
}
static struct sdma_platform_data imx51_sdma_pdata __initdata = {
......
arch/arm/mach-imx/mx31lilly-db.c
View file @ aac59e3e
......@@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev,
gpio_direction_input(gpio_wp);
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
detect_irq, IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
......
arch/arm/mach-imx/mxc.h
View file @ aac59e3e
......@@ -34,6 +34,7 @@
#define MXC_CPU_MX35 35
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
#define MXC_CPU_IMX6SL 0x60
#define MXC_CPU_IMX6DL 0x61
#define MXC_CPU_IMX6Q 0x63
......@@ -152,6 +153,11 @@ extern unsigned int __mxc_cpu_type;
#endif
#ifndef __ASSEMBLY__
static inline bool cpu_is_imx6sl(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6SL;
}
static inline bool cpu_is_imx6dl(void)
{
return __mxc_cpu_type == MXC_CPU_IMX6DL;
......
arch/arm/mach-imx/pm-imx6q.c
View file @ aac59e3e
......@@ -10,9 +10,15 @@
* http://www.gnu.org/copyleft/gpl.html
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
......@@ -22,6 +28,147 @@
#include "common.h"
#include "hardware.h"
#define CCR 0x0
#define BM_CCR_WB_COUNT (0x7 << 16)
#define BM_CCR_RBC_BYPASS_COUNT (0x3f << 21)
#define BM_CCR_RBC_EN (0x1 << 27)
#define CLPCR 0x54
#define BP_CLPCR_LPM 0
#define BM_CLPCR_LPM (0x3 << 0)
#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
#define BM_CLPCR_SBYOS (0x1 << 6)
#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
#define BM_CLPCR_VSTBY (0x1 << 8)
#define BP_CLPCR_STBY_COUNT 9
#define BM_CLPCR_STBY_COUNT (0x3 << 9)
#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
#define CGPR 0x64
#define BM_CGPR_CHICKEN_BIT (0x1 << 17)
static void __iomem *ccm_base;
void imx6q_set_chicken_bit(void)
{
u32 val = readl_relaxed(ccm_base + CGPR);
val |= BM_CGPR_CHICKEN_BIT;
writel_relaxed(val, ccm_base + CGPR);
}
static void imx6q_enable_rbc(bool enable)
{
u32 val;
/*
* need to mask all interrupts in GPC before
* operating RBC configurations
*/
imx_gpc_mask_all();
/* configure RBC enable bit */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_RBC_EN;
val |= enable ? BM_CCR_RBC_EN : 0;
writel_relaxed(val, ccm_base + CCR);
/* configure RBC count */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_RBC_BYPASS_COUNT;
val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
writel(val, ccm_base + CCR);
/*
* need to delay at least 2 cycles of CKIL(32K)
* due to hardware design requirement, which is
* ~61us, here we use 65us for safe
*/
udelay(65);
/* restore GPC interrupt mask settings */
imx_gpc_restore_all();
}
static void imx6q_enable_wb(bool enable)
{
u32 val;
/* configure well bias enable bit */
val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_WB_PER_AT_LPM;
val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
writel_relaxed(val, ccm_base + CLPCR);
/* configure well bias count */
val = readl_relaxed(ccm_base + CCR);
val &= ~BM_CCR_WB_COUNT;
val |= enable ? BM_CCR_WB_COUNT : 0;
writel_relaxed(val, ccm_base + CCR);
}
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
{
struct irq_desc *iomuxc_irq_desc;
u32 val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_LPM;
switch (mode) {
case WAIT_CLOCKED:
break;
case WAIT_UNCLOCKED:
val |= 0x1 << BP_CLPCR_LPM;
val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
break;
case STOP_POWER_ON:
val |= 0x2 << BP_CLPCR_LPM;
break;
case WAIT_UNCLOCKED_POWER_OFF:
val |= 0x1 << BP_CLPCR_LPM;
val &= ~BM_CLPCR_VSTBY;
val &= ~BM_CLPCR_SBYOS;
break;
case STOP_POWER_OFF:
val |= 0x2 << BP_CLPCR_LPM;
val |= 0x3 << BP_CLPCR_STBY_COUNT;
val |= BM_CLPCR_VSTBY;
val |= BM_CLPCR_SBYOS;
if (cpu_is_imx6sl()) {
val |= BM_CLPCR_BYPASS_PMIC_READY;
val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
} else {
val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
}
break;
default:
return -EINVAL;
}
/*
* Unmask the always pending IOMUXC interrupt #32 as wakeup source to
* deassert dsm_request signal, so that we can ensure dsm_request
* is not asserted when we're going to write CLPCR register to set LPM.
* After setting up LPM bits, we need to mask this wakeup source.
*/
iomuxc_irq_desc = irq_to_desc(32);
imx_gpc_irq_unmask(&iomuxc_irq_desc->irq_data);
writel_relaxed(val, ccm_base + CLPCR);
imx_gpc_irq_mask(&iomuxc_irq_desc->irq_data);
return 0;
}
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
......@@ -33,14 +180,19 @@ static int imx6q_pm_enter(suspend_state_t state)
switch (state) {
case PM_SUSPEND_MEM:
imx6q_set_lpm(STOP_POWER_OFF);
imx6q_enable_wb(true);
imx6q_enable_rbc(true);
imx_gpc_pre_suspend();
imx_anatop_pre_suspend();
imx_set_cpu_jump(0, v7_cpu_resume);
/* Zzz ... */
cpu_suspend(0, imx6q_suspend_finish);
imx_smp_prepare();
if (cpu_is_imx6q() || cpu_is_imx6dl())
imx_smp_prepare();
imx_anatop_post_resume();
imx_gpc_post_resume();
imx6q_enable_rbc(false);
imx6q_enable_wb(false);
imx6q_set_lpm(WAIT_CLOCKED);
break;
default:
......@@ -55,7 +207,29 @@ static const struct platform_suspend_ops imx6q_pm_ops = {
.valid = suspend_valid_only_mem,
};
void __init imx6q_pm_set_ccm_base(void __iomem *base)
{
ccm_base = base;
}
void __init imx6q_pm_init(void)
{
struct regmap *gpr;
WARN_ON(!ccm_base);
/*
* Force IOMUXC irq pending, so that the interrupt to GPC can be
* used to deassert dsm_request signal when the signal gets
* asserted unexpectedly.
*/
gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
if (!IS_ERR(gpr))
regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
IMX6Q_GPR1_GINT);
/* Set initial power mode */
imx6q_set_lpm(WAIT_CLOCKED);
suspend_set_ops(&imx6q_pm_ops);
}
arch/arm/mach-imx/src.c
View file @ aac59e3e
......@@ -91,6 +91,7 @@ void imx_enable_cpu(int cpu, bool enable)
spin_lock(&scr_lock);
val = readl_relaxed(src_base + SRC_SCR);
val = enable ? val | mask : val & ~mask;
val |= 1 << (BP_SRC_SCR_CORE1_RST + cpu - 1);
writel_relaxed(val, src_base + SRC_SCR);
spin_unlock(&scr_lock);
}
......
arch/arm/mach-imx/system.c
View file @ aac59e3e
......@@ -42,6 +42,9 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
{
unsigned int wcr_enable;
if (cpu_is_imx6q() || cpu_is_imx6dl())
imx_src_prepare_restart();
if (wdog_clk)
clk_enable(wdog_clk);
......@@ -52,6 +55,8 @@ void mxc_restart(enum reboot_mode mode, const char *cmd)
/* Assert SRS signal */
__raw_writew(wcr_enable, wdog_base);
/* write twice to ensure the request will not get ignored */
__raw_writew(wcr_enable, wdog_base);
/* wait for reset to assert... */
mdelay(500);
......
arch/arm/mach-imx/time.c
View file @ aac59e3e
......@@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
static struct irqaction mxc_timer_irq = {
.name = "i.MX Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = mxc_timer_interrupt,
};
......
arch/arm/mach-integrator/include/mach/cm.h → arch/arm/mach-integrator/cm.h
View file @ aac59e3e
/*
* update the core module control register.
* access the core module control register.
*/
u32 cm_get(void);
void cm_control(u32, u32);
#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL)
struct device_node;
void cm_init(void);
void cm_clear_irqs(void);
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
......
arch/arm/mach-integrator/core.c
View file @ aac59e3e
......@@ -22,77 +22,30 @@
#include <linux/amba/serial.h>
#include <linux/io.h>
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/cm.h>
#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
#include "cm.h"
#include "common.h"
#ifdef CONFIG_ATAGS
#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
#define KMI0_IRQ { IRQ_KMIINT0 }
#define KMI1_IRQ { IRQ_KMIINT1 }
static AMBA_APB_DEVICE(rtc, "rtc", 0,
INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
static AMBA_APB_DEVICE(uart0, "uart0", 0,
INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, NULL);
static AMBA_APB_DEVICE(uart1, "uart1", 0,
INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, NULL);
static AMBA_APB_DEVICE(kmi0, "kmi0", 0, KMI0_BASE, KMI0_IRQ, NULL);
static AMBA_APB_DEVICE(kmi1, "kmi1", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
&uart0_device,
&uart1_device,
&kmi0_device,
&kmi1_device,
};
static DEFINE_RAW_SPINLOCK(cm_lock);
static void __iomem *cm_base;
int __init integrator_init(bool is_cp)
/**
* cm_get - get the value from the CM_CTRL register
*/
u32 cm_get(void)
{
int i;
/*
* The Integrator/AP lacks necessary AMBA PrimeCell IDs, so we need to
* hard-code them. The Integator/CP and forward have proper cell IDs.
* Else we leave them undefined to the bus driver can autoprobe them.
*/
if (!is_cp && IS_ENABLED(CONFIG_ARCH_INTEGRATOR_AP)) {
rtc_device.periphid = 0x00041030;
uart0_device.periphid = 0x00041010;
uart1_device.periphid = 0x00041010;
kmi0_device.periphid = 0x00041050;
kmi1_device.periphid = 0x00041050;
uart0_device.dev.platform_data = &ap_uart_data;
uart1_device.dev.platform_data = &ap_uart_data;
}
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
return 0;
return readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
}
#endif
static DEFINE_RAW_SPINLOCK(cm_lock);
/**
* cm_control - update the CM_CTRL register.
* @mask: bits to change
......@@ -104,12 +57,80 @@ void cm_control(u32 mask, u32 set)
u32 val;
raw_spin_lock_irqsave(&cm_lock, flags);
val = readl(CM_CTRL) & ~mask;
writel(val | set, CM_CTRL);
val = readl(cm_base + INTEGRATOR_HDR_CTRL_OFFSET) & ~mask;
writel(val | set, cm_base + INTEGRATOR_HDR_CTRL_OFFSET);
raw_spin_unlock_irqrestore(&cm_lock, flags);
}
EXPORT_SYMBOL(cm_control);
static const char *integrator_arch_str(u32 id)
{
switch ((id >> 16) & 0xff) {
case 0x00:
return "ASB little-endian";
case 0x01:
return "AHB little-endian";
case 0x03:
return "AHB-Lite system bus, bi-endian";
case 0x04:
return "AHB";
case 0x08:
return "AHB system bus, ASB processor bus";
default:
return "Unknown";
}
}
static const char *integrator_fpga_str(u32 id)
{
switch ((id >> 12) & 0xf) {
case 0x01:
return "XC4062";
case 0x02:
return "XC4085";
case 0x03:
return "XVC600";
case 0x04:
return "EPM7256AE (Altera PLD)";
default:
return "Unknown";
}
}
void cm_clear_irqs(void)
{
/* disable core module IRQs */
writel(0xffffffffU, cm_base + INTEGRATOR_HDR_IC_OFFSET +
IRQ_ENABLE_CLEAR);
}
static const struct of_device_id cm_match[] = {
{ .compatible = "arm,core-module-integrator"},
{ },
};
void cm_init(void)
{
struct device_node *cm = of_find_matching_node(NULL, cm_match);
u32 val;
if (!cm) {
pr_crit("no core module node found in device tree\n");
return;
}
cm_base = of_iomap(cm, 0);
if (!cm_base) {
pr_crit("could not remap core module\n");
return;
}
cm_clear_irqs();
val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
pr_info("Detected ARM core module:\n");
pr_info(" Manufacturer: %02x\n", (val >> 24));
pr_info(" Architecture: %s\n", integrator_arch_str(val));
pr_info(" FPGA: %s\n", integrator_fpga_str(val));
pr_info(" Build: %02x\n", (val >> 4) & 0xFF);
pr_info(" Rev: %c\n", ('A' + (val & 0x03)));
}
/*
* We need to stop things allocating the low memory; ideally we need a
......@@ -145,27 +166,7 @@ static ssize_t intcp_get_arch(struct device *dev,
struct device_attribute *attr,
char *buf)
{
const char *arch;
switch ((integrator_id >> 16) & 0xff) {
case 0x00:
arch = "ASB little-endian";
break;
case 0x01:
arch = "AHB little-endian";
break;
case 0x03:
arch = "AHB-Lite system bus, bi-endian";
break;
case 0x04:
arch = "AHB";
break;
default:
arch = "Unknown";
break;
}
return sprintf(buf, "%s\n", arch);
return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
}
static struct device_attribute intcp_arch_attr =
......@@ -175,24 +176,7 @@ static ssize_t intcp_get_fpga(struct device *dev,
struct device_attribute *attr,
char *buf)
{
const char *fpga;
switch ((integrator_id >> 12) & 0xf) {
case 0x01:
fpga = "XC4062";
break;
case 0x02:
fpga = "XC4085";
break;
case 0x04:
fpga = "EPM7256AE (Altera PLD)";
break;
default:
fpga = "Unknown";
break;
}
return sprintf(buf, "%s\n", fpga);
return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
}
static struct device_attribute intcp_fpga_attr =
......
arch/arm/mach-integrator/include/mach/irqs.h deleted 100644 → 0
View file @ 21604cdc
/*
* arch/arm/mach-integrator/include/mach/irqs.h
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* Interrupt numbers, all of the above are just static reservations
* used so they can be encoded into device resources. They will finally
* be done away with when switching to device tree.
*/
#define IRQ_PIC_START 64
#define IRQ_SOFTINT (IRQ_PIC_START+0)
#define IRQ_UARTINT0 (IRQ_PIC_START+1)
#define IRQ_UARTINT1 (IRQ_PIC_START+2)
#define IRQ_KMIINT0 (IRQ_PIC_START+3)
#define IRQ_KMIINT1 (IRQ_PIC_START+4)
#define IRQ_TIMERINT0 (IRQ_PIC_START+5)
#define IRQ_TIMERINT1 (IRQ_PIC_START+6)
#define IRQ_TIMERINT2 (IRQ_PIC_START+7)
#define IRQ_RTCINT (IRQ_PIC_START+8)
#define IRQ_AP_EXPINT0 (IRQ_PIC_START+9)
#define IRQ_AP_EXPINT1 (IRQ_PIC_START+10)
#define IRQ_AP_EXPINT2 (IRQ_PIC_START+11)
#define IRQ_AP_EXPINT3 (IRQ_PIC_START+12)
#define IRQ_AP_PCIINT0 (IRQ_PIC_START+13)
#define IRQ_AP_PCIINT1 (IRQ_PIC_START+14)
#define IRQ_AP_PCIINT2 (IRQ_PIC_START+15)
#define IRQ_AP_PCIINT3 (IRQ_PIC_START+16)
#define IRQ_AP_V3INT (IRQ_PIC_START+17)
#define IRQ_AP_CPINT0 (IRQ_PIC_START+18)
#define IRQ_AP_CPINT1 (IRQ_PIC_START+19)
#define IRQ_AP_LBUSTIMEOUT (IRQ_PIC_START+20)
#define IRQ_AP_APCINT (IRQ_PIC_START+21)
#define IRQ_CP_CLCDCINT (IRQ_PIC_START+22)
#define IRQ_CP_MMCIINT0 (IRQ_PIC_START+23)
#define IRQ_CP_MMCIINT1 (IRQ_PIC_START+24)
#define IRQ_CP_AACIINT (IRQ_PIC_START+25)
#define IRQ_CP_CPPLDINT (IRQ_PIC_START+26)
#define IRQ_CP_ETHINT (IRQ_PIC_START+27)
#define IRQ_CP_TSPENINT (IRQ_PIC_START+28)
#define IRQ_PIC_END (IRQ_PIC_START+28)
#define IRQ_CIC_START (IRQ_PIC_END+1)
#define IRQ_CM_SOFTINT (IRQ_CIC_START+0)
#define IRQ_CM_COMMRX (IRQ_CIC_START+1)
#define IRQ_CM_COMMTX (IRQ_CIC_START+2)
#define IRQ_CIC_END (IRQ_CIC_START+2)
/*
* IntegratorCP only
*/
#define IRQ_SIC_START (IRQ_CIC_END+1)
#define IRQ_SIC_CP_SOFTINT (IRQ_SIC_START+0)
#define IRQ_SIC_CP_RI0 (IRQ_SIC_START+1)
#define IRQ_SIC_CP_RI1 (IRQ_SIC_START+2)
#define IRQ_SIC_CP_CARDIN (IRQ_SIC_START+3)
#define IRQ_SIC_CP_LMINT0 (IRQ_SIC_START+4)
#define IRQ_SIC_CP_LMINT1 (IRQ_SIC_START+5)
#define IRQ_SIC_CP_LMINT2 (IRQ_SIC_START+6)
#define IRQ_SIC_CP_LMINT3 (IRQ_SIC_START+7)
#define IRQ_SIC_CP_LMINT4 (IRQ_SIC_START+8)
#define IRQ_SIC_CP_LMINT5 (IRQ_SIC_START+9)
#define IRQ_SIC_CP_LMINT6 (IRQ_SIC_START+10)
#define IRQ_SIC_CP_LMINT7 (IRQ_SIC_START+11)
#define IRQ_SIC_END (IRQ_SIC_START+11)
arch/arm/mach-integrator/integrator_ap.c
View file @ aac59e3e
......@@ -51,13 +51,13 @@
#include <asm/mach-types.h>
#include <mach/lm.h>
#include <mach/irqs.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "cm.h"
#include "common.h"
#include "pci_v3.h"
......@@ -146,7 +146,7 @@ static int irq_suspend(void)
static void irq_resume(void)
{
/* disable all irq sources */
writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
cm_clear_irqs();
writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
......@@ -402,8 +402,6 @@ void __init ap_init_early(void)
{
}
#ifdef CONFIG_OF
static void __init ap_of_timer_init(void)
{
struct device_node *node;
......@@ -450,8 +448,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = {
static void __init ap_init_irq_of(void)
{
/* disable core module IRQs */
writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
cm_init();
of_irq_init(fpga_irq_of_match);
integrator_clk_init(false);
}
......@@ -473,6 +470,11 @@ static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = {
{ /* sentinel */ },
};
static const struct of_device_id ap_syscon_match[] = {
{ .compatible = "arm,integrator-ap-syscon"},
{ },
};
static void __init ap_init_of(void)
{
unsigned long sc_dec;
......@@ -489,7 +491,8 @@ static void __init ap_init_of(void)
root = of_find_node_by_path("/");
if (!root)
return;
syscon = of_find_node_by_path("/syscon");
syscon = of_find_matching_node(root, ap_syscon_match);
if (!syscon)
return;
......@@ -541,7 +544,7 @@ static void __init ap_init_of(void)
lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
lmdev->resource.flags = IORESOURCE_MEM;
lmdev->irq = IRQ_AP_EXPINT0 + i;
lmdev->irq = irq_of_parse_and_map(syscon, i);
lmdev->id = i;
lm_device_register(lmdev);
......@@ -564,136 +567,3 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
.restart = integrator_restart,
.dt_compat = ap_dt_board_compat,
MACHINE_END
#endif
#ifdef CONFIG_ATAGS
/*
* For the ATAG boot some static mappings are needed. This will
* go away with the ATAG support down the road.
*/
static struct map_desc ap_io_desc_atag[] __initdata = {
{
.virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
.length = SZ_4K,
.type = MT_DEVICE
},
};
static void __init ap_map_io_atag(void)
{
iotable_init(ap_io_desc_atag, ARRAY_SIZE(ap_io_desc_atag));
ap_map_io();
}
/*
* This is where non-devicetree initialization code is collected and stashed
* for eventual deletion.
*/
static struct platform_device pci_v3_device = {
.name = "pci-v3",
.id = 0,
};
static struct resource cfi_flash_resource = {
.start = INTEGRATOR_FLASH_BASE,
.end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device cfi_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &ap_flash_data,
},
.num_resources = 1,
.resource = &cfi_flash_resource,
};
static void __init ap_timer_init(void)
{
struct clk *clk;
unsigned long rate;
clk = clk_get_sys("ap_timer", NULL);
BUG_ON(IS_ERR(clk));
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE);
integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE,
IRQ_TIMERINT1);
}
#define INTEGRATOR_SC_VALID_INT 0x003fffff
static void __init ap_init_irq(void)
{
/* Disable all interrupts initially. */
/* Do the core module ones */
writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR);
/* do the header card stuff next */
writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR);
writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR);
fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START,
-1, INTEGRATOR_SC_VALID_INT, NULL);
integrator_clk_init(false);
}
static void __init ap_init(void)
{
unsigned long sc_dec;
int i;
platform_device_register(&pci_v3_device);
platform_device_register(&cfi_flash_device);
ap_syscon_base = __io_address(INTEGRATOR_SC_BASE);
sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
for (i = 0; i < 4; i++) {
struct lm_device *lmdev;
if ((sc_dec & (16 << i)) == 0)
continue;
lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL);
if (!lmdev)
continue;
lmdev->resource.start = 0xc0000000 + 0x10000000 * i;
lmdev->resource.end = lmdev->resource.start + 0x0fffffff;
lmdev->resource.flags = IORESOURCE_MEM;
lmdev->irq = IRQ_AP_EXPINT0 + i;
lmdev->id = i;
lm_device_register(lmdev);
}
integrator_init(false);
}
MACHINE_START(INTEGRATOR, "ARM-Integrator")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = ap_map_io_atag,
.init_early = ap_init_early,
.init_irq = ap_init_irq,
.handle_irq = fpga_handle_irq,
.init_time = ap_timer_init,
.init_machine = ap_init,
.restart = integrator_restart,
MACHINE_END
#endif
arch/arm/mach-integrator/integrator_cp.c
View file @ aac59e3e
......@@ -36,9 +36,7 @@
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/icst.h>
#include <mach/cm.h>
#include <mach/lm.h>
#include <mach/irqs.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
......@@ -50,6 +48,7 @@
#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "cm.h"
#include "common.h"
/* Base address to the CP controller */
......@@ -249,7 +248,6 @@ static void __init intcp_init_early(void)
#endif
}
#ifdef CONFIG_OF
static const struct of_device_id fpga_irq_of_match[] __initconst = {
{ .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
{ /* Sentinel */ }
......@@ -257,6 +255,7 @@ static const struct of_device_id fpga_irq_of_match[] __initconst = {
static void __init intcp_init_irq_of(void)
{
cm_init();
of_irq_init(fpga_irq_of_match);
integrator_clk_init(true);
}
......@@ -287,6 +286,11 @@ static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
{ /* sentinel */ },
};
static const struct of_device_id intcp_syscon_match[] = {
{ .compatible = "arm,integrator-cp-syscon"},
{ },
};
static void __init intcp_init_of(void)
{
struct device_node *root;
......@@ -301,7 +305,8 @@ static void __init intcp_init_of(void)
root = of_find_node_by_path("/");
if (!root)
return;
cpcon = of_find_node_by_path("/cpcon");
cpcon = of_find_matching_node(root, intcp_syscon_match);
if (!cpcon)
return;
......@@ -354,175 +359,3 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
.restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
MACHINE_END
#endif
#ifdef CONFIG_ATAGS
/*
* For the ATAG boot some static mappings are needed. This will
* go away with the ATAG support down the road.
*/
static struct map_desc intcp_io_desc_atag[] __initdata = {
{
.virtual = IO_ADDRESS(INTEGRATOR_CP_CTL_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_CP_CTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE
},
};
static void __init intcp_map_io_atag(void)
{
iotable_init(intcp_io_desc_atag, ARRAY_SIZE(intcp_io_desc_atag));
intcp_con_base = __io_address(INTEGRATOR_CP_CTL_BASE);
intcp_map_io();
}
/*
* This is where non-devicetree initialization code is collected and stashed
* for eventual deletion.
*/
#define INTCP_FLASH_SIZE SZ_32M
static struct resource intcp_flash_resource = {
.start = INTCP_PA_FLASH_BASE,
.end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device intcp_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &intcp_flash_data,
},
.num_resources = 1,
.resource = &intcp_flash_resource,
};
#define INTCP_ETH_SIZE 0x10
static struct resource smc91x_resources[] = {
[0] = {
.start = INTEGRATOR_CP_ETH_BASE,
.end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_CP_ETHINT,
.end = IRQ_CP_ETHINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct platform_device *intcp_devs[] __initdata = {
&intcp_flash_device,
&smc91x_device,
};
#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40)
#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE)
#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE)
static void __init intcp_init_irq(void)
{
u32 pic_mask, cic_mask, sic_mask;
/* These masks are for the HW IRQ registers */
pic_mask = ~((~0u) << (11 - 0));
pic_mask |= (~((~0u) << (29 - 22))) << 22;
cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START));
sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START));
/*
* Disable all interrupt sources
*/
writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR);
writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR);
writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR);
writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR);
writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR);
writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR);
fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START,
-1, pic_mask, NULL);
fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START,
-1, cic_mask, NULL);
fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
IRQ_CP_CPPLDINT, sic_mask, NULL);
integrator_clk_init(true);
}
#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
static void __init cp_timer_init(void)
{
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
sp804_clocksource_init(TIMER2_VA_BASE, "timer2");
sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
}
#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE,
INTEGRATOR_CP_MMC_IRQS, &mmc_data);
static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE,
INTEGRATOR_CP_AACI_IRQS, NULL);
static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE,
{ IRQ_CP_CLCDCINT }, &clcd_data);
static struct amba_device *amba_devs[] __initdata = {
&mmc_device,
&aaci_device,
&clcd_device,
};
static void __init intcp_init(void)
{
int i;
platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs));
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
integrator_init(true);
}
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = intcp_map_io_atag,
.init_early = intcp_init_early,
.init_irq = intcp_init_irq,
.handle_irq = fpga_handle_irq,
.init_time = cp_timer_init,
.init_machine = intcp_init,
.restart = integrator_restart,
MACHINE_END
#endif
arch/arm/mach-integrator/leds.c
View file @ aac59e3e
......@@ -11,10 +11,11 @@
#include <linux/slab.h>
#include <linux/leds.h>
#include <mach/cm.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include "cm.h"
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
......@@ -78,7 +79,7 @@ static void cm_led_set(struct led_classdev *cdev,
static enum led_brightness cm_led_get(struct led_classdev *cdev)
{
u32 reg = readl(CM_CTRL);
u32 reg = cm_get();
return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
}
......
arch/arm/mach-integrator/pci_v3.c
View file @ aac59e3e
......@@ -36,7 +36,6 @@
#include <mach/hardware.h>
#include <mach/platform.h>
#include <mach/irqs.h>
#include <asm/mach/map.h>
#include <asm/signal.h>
......@@ -605,7 +604,7 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
return 1;
}
static irqreturn_t v3_irq(int dummy, void *devid)
static irqreturn_t v3_irq(int irq, void *devid)
{
#ifdef CONFIG_DEBUG_LL
struct pt_regs *regs = get_irq_regs();
......@@ -615,7 +614,7 @@ static irqreturn_t v3_irq(int dummy, void *devid)
extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
"ISTAT=%02x\n", irq, pc, instr,
__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFADDR_OFFSET),
__raw_readl(ap_syscon_base + INTEGRATOR_SC_LBFCODE_OFFSET) & 255,
v3_readb(V3_LB_ISTAT));
......@@ -809,32 +808,6 @@ static u8 __init pci_v3_swizzle(struct pci_dev *dev, u8 *pinp)
return pci_common_swizzle(dev, pinp);
}
static int irq_tab[4] __initdata = {
IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3
};
/*
* map the specified device/slot/pin to an IRQ. This works out such
* that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
*/
static int __init pci_v3_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int intnr = ((slot - 9) + (pin - 1)) & 3;
return irq_tab[intnr];
}
static struct hw_pci pci_v3 __initdata = {
.swizzle = pci_v3_swizzle,
.setup = pci_v3_setup,
.nr_controllers = 1,
.ops = &pci_v3_ops,
.preinit = pci_v3_preinit,
.postinit = pci_v3_postinit,
};
#ifdef CONFIG_OF
static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
{
struct of_irq oirq;
......@@ -851,14 +824,36 @@ static int __init pci_v3_map_irq_dt(const struct pci_dev *dev, u8 slot, u8 pin)
oirq.size);
}
static int __init pci_v3_dtprobe(struct platform_device *pdev,
struct device_node *np)
static struct hw_pci pci_v3 __initdata = {
.swizzle = pci_v3_swizzle,
.setup = pci_v3_setup,
.nr_controllers = 1,
.ops = &pci_v3_ops,
.preinit = pci_v3_preinit,
.postinit = pci_v3_postinit,
};
static int __init pci_v3_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct of_pci_range_parser parser;
struct of_pci_range range;
struct resource *res;
int irq, ret;
/* Remap the Integrator system controller */
ap_syscon_base = devm_ioremap(&pdev->dev, INTEGRATOR_SC_BASE, 0x100);
if (!ap_syscon_base) {
dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
return -ENODEV;
}
/* Device tree probe path */
if (!np) {
dev_err(&pdev->dev, "no device tree node for PCIv3\n");
return -ENODEV;
}
if (of_pci_range_parser_init(&parser, np))
return -EINVAL;
......@@ -925,76 +920,6 @@ static int __init pci_v3_dtprobe(struct platform_device *pdev,
return 0;
}
#else
static inline int pci_v3_dtprobe(struct platform_device *pdev,
struct device_node *np)
{
return -EINVAL;
}
#endif
static int __init pci_v3_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
int ret;
/* Remap the Integrator system controller */
ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
if (!ap_syscon_base) {
dev_err(&pdev->dev, "unable to remap the AP syscon for PCIv3\n");
return -ENODEV;
}
/* Device tree probe path */
if (np)
return pci_v3_dtprobe(pdev, np);
pci_v3_base = devm_ioremap(&pdev->dev, PHYS_PCI_V3_BASE, SZ_64K);
if (!pci_v3_base) {
dev_err(&pdev->dev, "unable to remap PCIv3 base\n");
return -ENODEV;
}
ret = devm_request_irq(&pdev->dev, IRQ_AP_V3INT, v3_irq, 0, "V3", NULL);
if (ret) {
dev_err(&pdev->dev, "unable to grab PCI error interrupt: %d\n",
ret);
return -ENODEV;
}
conf_mem.name = "PCIv3 config";
conf_mem.start = PHYS_PCI_CONFIG_BASE;
conf_mem.end = PHYS_PCI_CONFIG_BASE + SZ_16M - 1;
conf_mem.flags = IORESOURCE_MEM;
io_mem.name = "PCIv3 I/O";
io_mem.start = PHYS_PCI_IO_BASE;
io_mem.end = PHYS_PCI_IO_BASE + SZ_16M - 1;
io_mem.flags = IORESOURCE_MEM;
non_mem_pci = 0x00000000;
non_mem_pci_sz = SZ_256M;
non_mem.name = "PCIv3 non-prefetched mem";
non_mem.start = PHYS_PCI_MEM_BASE;
non_mem.end = PHYS_PCI_MEM_BASE + SZ_256M - 1;
non_mem.flags = IORESOURCE_MEM;
pre_mem_pci = 0x10000000;
pre_mem_pci_sz = SZ_256M;
pre_mem.name = "PCIv3 prefetched mem";
pre_mem.start = PHYS_PCI_PRE_BASE + SZ_256M;
pre_mem.end = PHYS_PCI_PRE_BASE + SZ_256M - 1;
pre_mem.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
pci_v3.map_irq = pci_v3_map_irq;
pci_common_init_dev(&pdev->dev, &pci_v3);
return 0;
}
static const struct of_device_id pci_ids[] = {
{ .compatible = "v3,v360epc-pci", },
{},
......
arch/arm/mach-keystone/Kconfig
View file @ aac59e3e
......@@ -9,6 +9,8 @@ config ARCH_KEYSTONE
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_ERRATA_798181 if SMP
select COMMON_CLK_KEYSTONE
select TI_EDMA
help
Support for boards based on the Texas Instruments Keystone family of
SoCs.
arch/arm/mach-keystone/Makefile
View file @ aac59e3e
......@@ -4,3 +4,6 @@ plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_SMP) += platsmp.o
# PM domain driver for Keystone SOCs
obj-$(CONFIG_ARCH_KEYSTONE) += pm_domain.o
arch/arm/mach-keystone/pm_domain.c 0 → 100644
View file @ aac59e3e
/*
* PM domain driver for Keystone2 devices
*
* Copyright 2013 Texas Instruments, Inc.
* Santosh Shilimkar <santosh.shillimkar@ti.com>
*
* Based on Kevins work on DAVINCI SOCs
* Kevin Hilman <khilman@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pm_runtime.h>
#include <linux/pm_clock.h>
#include <linux/platform_device.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#ifdef CONFIG_PM_RUNTIME
static int keystone_pm_runtime_suspend(struct device *dev)
{
int ret;
dev_dbg(dev, "%s\n", __func__);
ret = pm_generic_runtime_suspend(dev);
if (ret)
return ret;
ret = pm_clk_suspend(dev);
if (ret) {
pm_generic_runtime_resume(dev);
return ret;
}
return 0;
}
static int keystone_pm_runtime_resume(struct device *dev)
{
dev_dbg(dev, "%s\n", __func__);
pm_clk_resume(dev);
return pm_generic_runtime_resume(dev);
}
#endif
static struct dev_pm_domain keystone_pm_domain = {
.ops = {
SET_RUNTIME_PM_OPS(keystone_pm_runtime_suspend,
keystone_pm_runtime_resume, NULL)
USE_PLATFORM_PM_SLEEP_OPS
},
};
static struct pm_clk_notifier_block platform_domain_notifier = {
.pm_domain = &keystone_pm_domain,
};
static struct of_device_id of_keystone_table[] = {
{.compatible = "ti,keystone"},
{ /* end of list */ },
};
int __init keystone_pm_runtime_init(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, of_keystone_table);
if (!np)
return 0;
of_clk_init(NULL);
pm_clk_add_notifier(&platform_bus_type, &platform_domain_notifier);
return 0;
}
subsys_initcall(keystone_pm_runtime_init);
arch/arm/mach-kirkwood/Makefile
View file @ aac59e3e
obj-y += common.o pcie.o
obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
......
arch/arm/mach-kirkwood/board-dt.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-kirkwood/common.c
View file @ aac59e3e
......@@ -721,6 +721,7 @@ void __init kirkwood_init(void)
kirkwood_xor1_init();
kirkwood_crypto_init();
kirkwood_pm_init();
kirkwood_cpuidle_init();
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
......
arch/arm/mach-kirkwood/common.h
View file @ aac59e3e
......@@ -58,6 +58,12 @@ void kirkwood_cpufreq_init(void);
void kirkwood_restart(enum reboot_mode, const char *);
void kirkwood_clk_init(void);
#ifdef CONFIG_PM
void kirkwood_pm_init(void);
#else
static inline void kirkwood_pm_init(void) {};
#endif
/* board init functions for boards not fully converted to fdt */
#ifdef CONFIG_MACH_MV88F6281GTW_GE_DT
void mv88f6281gtw_ge_init(void);
......
arch/arm/mach-kirkwood/include/mach/bridge-regs.h
View file @ aac59e3e
......@@ -78,4 +78,6 @@
#define CGC_TDM (1 << 20)
#define CGC_RESERVED (0x6 << 21)
#define MEMORY_PM_CTRL (BRIDGE_VIRT_BASE + 0x118)
#endif
arch/arm/mach-kirkwood/pm.c 0 → 100644
View file @ aac59e3e
/*
* Power Management driver for Marvell Kirkwood SoCs
*
* Copyright (C) 2013 Ezequiel Garcia <ezequiel@free-electrons.com>
* Copyright (C) 2010 Simon Guinot <sguinot@lacie.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License,
* version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
#include <mach/bridge-regs.h>
static void __iomem *ddr_operation_base;
static void kirkwood_low_power(void)
{
u32 mem_pm_ctrl;
mem_pm_ctrl = readl(MEMORY_PM_CTRL);
/* Set peripherals to low-power mode */
writel_relaxed(~0, MEMORY_PM_CTRL);
/* Set DDR in self-refresh */
writel_relaxed(0x7, ddr_operation_base);
/*
* Set CPU in wait-for-interrupt state.
* This disables the CPU core clocks,
* the array clocks, and also the L2 controller.
*/
cpu_do_idle();
writel_relaxed(mem_pm_ctrl, MEMORY_PM_CTRL);
}
static int kirkwood_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
kirkwood_low_power();
break;
default:
return -EINVAL;
}
return 0;
}
static int kirkwood_pm_valid_standby(suspend_state_t state)
{
return state == PM_SUSPEND_STANDBY;
}
static const struct platform_suspend_ops kirkwood_suspend_ops = {
.enter = kirkwood_suspend_enter,
.valid = kirkwood_pm_valid_standby,
};
int __init kirkwood_pm_init(void)
{
ddr_operation_base = ioremap(DDR_OPERATION_BASE, 4);
suspend_set_ops(&kirkwood_suspend_ops);
return 0;
}
arch/arm/mach-omap2/Makefile
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/clockdomain.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/clockdomains43xx_data.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/cm33xx.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/cm33xx.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/cminst44xx.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/cminst44xx.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/id.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/io.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap-secure.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap-smp.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_common_data.h 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_interconnect_data.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_43xx_data.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_54xx_data.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/powerdomain.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/powerdomains43xx_data.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/prcm43xx.h 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/soc.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-omap2/timer.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/Makefile
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/clock.c deleted 100644 → 0
View file @ 21604cdc
This diff is collapsed.
arch/arm/mach-s3c64xx/common.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/common.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/dma.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-anw6410.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-crag6410.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-hmt.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-mini6410.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-ncp.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-smartq.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-smdk6400.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/mach-smdk6410.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/pm.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/s3c6400.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-s3c64xx/s3c6410.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/Kconfig
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/Makefile
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/board-lager.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/clock-r7s72100.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/clock-r8a73a4.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/clock-r8a7778.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/clock-r8a7779.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/clock-r8a7790.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/clock-r8a7791.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/headsmp.S
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/include/mach/r7s72100.h 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/include/mach/r8a7791.h 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/include/mach/rcar-gen2.h 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/platsmp-apmu.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/platsmp-scu.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/platsmp.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r7s72100.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a73a4.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7778.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7779.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7790.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7791.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/setup-rcar-gen2.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/smp-emev2.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/smp-r8a7779.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/smp-r8a7790.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/smp-r8a7791.c 0 → 100644
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-shmobile/smp-sh73a0.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-sunxi/Kconfig
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-sunxi/sunxi.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/Kconfig
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/Makefile
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/cpuidle.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/flowctrl.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/fuse.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/fuse.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/hotplug.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/iomap.h
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/platsmp.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/pm.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/pmc.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/powergate.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/reset-handler.S
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/sleep-tegra30.S
View file @ aac59e3e
This diff is collapsed.
arch/arm/mach-tegra/tegra.c
View file @ aac59e3e
This diff is collapsed.
arch/arm/plat-samsung/include/plat/cpu.h
View file @ aac59e3e
This diff is collapsed.
drivers/clk/samsung/Makefile
View file @ aac59e3e
This diff is collapsed.
drivers/cpufreq/integrator-cpufreq.c
View file @ aac59e3e
This diff is collapsed.
drivers/cpuidle/Kconfig.arm
View file @ aac59e3e
This diff is collapsed.
drivers/cpuidle/cpuidle-calxeda.c
View file @ aac59e3e
This diff is collapsed.
drivers/dma/Kconfig
View file @ aac59e3e
This diff is collapsed.
drivers/usb/host/ohci-s3c2410.c
View file @ aac59e3e
This diff is collapsed.
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h
View file @ aac59e3e
This diff is collapsed.
include/linux/tegra-powergate.h
View file @ aac59e3e
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7