Commit aba11fc5 authored by Kumar Gala's avatar Kumar Gala

powerpc/e500mc: flush L2 on NAP for e500mc

If we have an L2CSR register (e500mc) we need to flush the L2 before going
to nap.  We use the HW flush mechanism provided in that register.

The code reuses the CPU_FTR_604_PERF_MON bit as it is no longer used by
any code in the kernel.  Additionally we didn't reuse the exist L2CR
feature bit as this is intended for the 7xxx L2CR register and L2CSR
is part of the new Freescale "Book-E" registers.
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent fc4033b2
......@@ -47,6 +47,15 @@ BEGIN_FTR_SECTION
mtlr r0
lis r3,HID0_NAP@h
END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
BEGIN_FTR_SECTION
msync
li r7,L2CSR0_L2FL@l
mtspr SPRN_L2CSR0,r7
2:
mfspr r7,SPRN_L2CSR0
andi. r4,r7,L2CSR0_L2FL@l
bne 2b
END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP)
1:
/* Go to NAP or DOZE now */
mfspr r4,SPRN_HID0
......
......@@ -132,7 +132,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
#define CPU_FTR_TAU ASM_CONST(0x0000000000000010)
#define CPU_FTR_CAN_DOZE ASM_CONST(0x0000000000000020)
#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)
#define CPU_FTR_604_PERF_MON ASM_CONST(0x0000000000000080)
#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080)
#define CPU_FTR_601 ASM_CONST(0x0000000000000100)
#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200)
#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)
......@@ -245,8 +245,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
#define CPU_FTRS_604 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | CPU_FTR_604_PERF_MON | CPU_FTR_HPTE_TABLE | \
CPU_FTR_PPC_LE)
CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
......@@ -353,7 +352,8 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
CPU_FTR_NODSISRALIGN)
#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN)
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
CPU_FTR_L2CSR)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
......
......@@ -80,6 +80,7 @@
#define SPRN_DSRR1 0x23F /* Debug Save and Restore Register 1 */
#define SPRN_SPRG8 0x25C /* Special Purpose Register General 8 */
#define SPRN_SPRG9 0x25D /* Special Purpose Register General 9 */
#define SPRN_L1CSR2 0x25E /* L1 Cache Control and Status Register 2 */
#define SPRN_MAS0 0x270 /* MMU Assist Register 0 */
#define SPRN_MAS1 0x271 /* MMU Assist Register 1 */
#define SPRN_MAS2 0x272 /* MMU Assist Register 2 */
......@@ -110,6 +111,8 @@
#define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */
#define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */
#define SPRN_L2CSR1 0x3FA /* L2 Data Cache Control and Status Register 1 */
#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
#define SPRN_SVR 0x3FF /* System Version Register */
......@@ -393,6 +396,20 @@
#define L1CSR1_ICFI 0x00000002 /* Instr Cache Flash Invalidate */
#define L1CSR1_ICE 0x00000001 /* Instr Cache Enable */
/* Bit definitions for L2CSR0. */
#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */
#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */
#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */
#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */
#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */
#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */
#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */
#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */
#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */
#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */
#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */
#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */
/* Bit definitions for SGR. */
#define SGR_NORMAL 0 /* Speculative fetching allowed. */
#define SGR_GUARDED 1 /* Speculative fetching disallowed. */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment