Commit abac8b54 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: conditionally build in USB driver support

Separate the comedi_usb_* functions out of drivers.c into a new
source file, comedi_usb.c. This allows conditionally building
support for comedi USB drivers into the comedi core without the
need for the #if'defery. Fix the Kconfig and Makefile appropriately.
For aesthetic reasons, add some whitespace to the Makefile to keep
everything lined up.

Group all the comedi_usb_* prototypes into one place in comedidev.h.
Protect these prototypes with an #ifdef so that building a comedi
usb driver without USB support will cause a build error. This will
normally not happen as long as the comedi USB driver is placed in
the proper group in the Kconfig.

Remove the #include<linux/usb.h> from comedidev.h and drivers.c. This
include is only needed by the comedi USB driver support code and the
USB drivers. The include should occur in those files.

Removing the include of usb.h exposed a couple drivers that need
<linux/interrupt.h> and <linux/sched.h>. Add the missing includes.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent ae5943de
......@@ -1175,11 +1175,7 @@ menuconfig COMEDI_USB_DRIVERS
bool "Comedi USB drivers"
depends on USB
---help---
Enable comedi USB drivers to be built
Note that the answer to this question won't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about USB comedi drivers.
Enable support for comedi USB drivers.
if COMEDI_USB_DRIVERS
......
comedi-y := comedi_fops.o range.o drivers.o \
comedi_buf.o
comedi-$(CONFIG_PROC_FS) += proc.o
comedi-$(CONFIG_COMPAT) += comedi_compat32.o
comedi-y := comedi_fops.o range.o drivers.o \
comedi_buf.o
comedi-$(CONFIG_COMEDI_USB_DRIVERS) += comedi_usb.o
comedi-$(CONFIG_PROC_FS) += proc.o
comedi-$(CONFIG_COMPAT) += comedi_compat32.o
obj-$(CONFIG_COMEDI) += comedi.o
obj-$(CONFIG_COMEDI) += comedi.o
obj-$(CONFIG_COMEDI) += kcomedilib/
obj-$(CONFIG_COMEDI) += drivers/
obj-$(CONFIG_COMEDI) += kcomedilib/
obj-$(CONFIG_COMEDI) += drivers/
/*
* comedi_usb.c
* Comedi USB driver specific functions.
*
* COMEDI - Linux Control and Measurement Device Interface
* Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/usb.h>
#include "comedidev.h"
/**
* comedi_to_usb_interface() - comedi_device pointer to usb_interface pointer.
* @dev: comedi_device struct
*/
struct usb_interface *comedi_to_usb_interface(struct comedi_device *dev)
{
return dev->hw_dev ? to_usb_interface(dev->hw_dev) : NULL;
}
EXPORT_SYMBOL_GPL(comedi_to_usb_interface);
/**
* comedi_usb_auto_config() - Configure/probe a comedi USB driver.
* @intf: usb_interface struct
* @driver: comedi_driver struct
*
* Typically called from the usb_driver (*probe) function.
*/
int comedi_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
return comedi_auto_config(&intf->dev, driver, 0);
}
EXPORT_SYMBOL_GPL(comedi_usb_auto_config);
/**
* comedi_pci_auto_unconfig() - Unconfigure/disconnect a comedi USB driver.
* @intf: usb_interface struct
*
* Typically called from the usb_driver (*disconnect) function.
*/
void comedi_usb_auto_unconfig(struct usb_interface *intf)
{
comedi_auto_unconfig(&intf->dev);
}
EXPORT_SYMBOL_GPL(comedi_usb_auto_unconfig);
/**
* comedi_usb_driver_register() - Register a comedi USB driver.
* @comedi_driver: comedi_driver struct
* @usb_driver: usb_driver struct
*
* This function is used for the module_init() of comedi USB drivers.
* Do not call it directly, use the module_comedi_usb_driver() helper
* macro instead.
*/
int comedi_usb_driver_register(struct comedi_driver *comedi_driver,
struct usb_driver *usb_driver)
{
int ret;
ret = comedi_driver_register(comedi_driver);
if (ret < 0)
return ret;
ret = usb_register(usb_driver);
if (ret < 0) {
comedi_driver_unregister(comedi_driver);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_register);
/**
* comedi_usb_driver_unregister() - Unregister a comedi USB driver.
* @comedi_driver: comedi_driver struct
* @usb_driver: usb_driver struct
*
* This function is used for the module_exit() of comedi USB drivers.
* Do not call it directly, use the module_comedi_usb_driver() helper
* macro instead.
*/
void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver,
struct usb_driver *usb_driver)
{
usb_deregister(usb_driver);
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
......@@ -41,7 +41,6 @@
#include <linux/io.h>
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/usb.h>
#include "comedi.h"
......@@ -337,25 +336,6 @@ void comedi_pcmcia_driver_unregister(struct comedi_driver *,
module_driver(__comedi_driver, comedi_pcmcia_driver_register, \
comedi_pcmcia_driver_unregister, &(__pcmcia_driver))
struct usb_driver;
int comedi_usb_driver_register(struct comedi_driver *, struct usb_driver *);
void comedi_usb_driver_unregister(struct comedi_driver *, struct usb_driver *);
/**
* module_comedi_usb_driver() - Helper macro for registering a comedi USB driver
* @__comedi_driver: comedi_driver struct
* @__usb_driver: usb_driver struct
*
* Helper macro for comedi USB drivers which do not do anything special
* in module init/exit. This eliminates a lot of boilerplate. Each
* module may only use this macro once, and calling it replaces
* module_init() and module_exit()
*/
#define module_comedi_usb_driver(__comedi_driver, __usb_driver) \
module_driver(__comedi_driver, comedi_usb_driver_register, \
comedi_usb_driver_unregister, &(__usb_driver))
void init_polling(void);
void cleanup_polling(void);
void start_polling(struct comedi_device *);
......@@ -449,12 +429,6 @@ static inline struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
}
static inline struct usb_interface *
comedi_to_usb_interface(struct comedi_device *dev)
{
return dev->hw_dev ? to_usb_interface(dev->hw_dev) : NULL;
}
unsigned int comedi_buf_write_alloc(struct comedi_async *, unsigned int);
unsigned int comedi_buf_write_free(struct comedi_async *, unsigned int);
......@@ -485,15 +459,35 @@ static inline int comedi_pci_auto_config(struct pci_dev *pcidev,
void comedi_pci_auto_unconfig(struct pci_dev *pcidev);
static inline int comedi_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
return comedi_auto_config(&intf->dev, driver, 0);
}
#ifdef CONFIG_COMEDI_USB_DRIVERS
static inline void comedi_usb_auto_unconfig(struct usb_interface *intf)
{
comedi_auto_unconfig(&intf->dev);
}
/* comedi_usb.c - comedi USB driver specific functions */
struct usb_driver;
struct usb_interface;
struct usb_interface *comedi_to_usb_interface(struct comedi_device *);
int comedi_usb_auto_config(struct usb_interface *, struct comedi_driver *);
void comedi_usb_auto_unconfig(struct usb_interface *);
int comedi_usb_driver_register(struct comedi_driver *, struct usb_driver *);
void comedi_usb_driver_unregister(struct comedi_driver *, struct usb_driver *);
/**
* module_comedi_usb_driver() - Helper macro for registering a comedi USB driver
* @__comedi_driver: comedi_driver struct
* @__usb_driver: usb_driver struct
*
* Helper macro for comedi USB drivers which do not do anything special
* in module init/exit. This eliminates a lot of boilerplate. Each
* module may only use this macro once, and calling it replaces
* module_init() and module_exit()
*/
#define module_comedi_usb_driver(__comedi_driver, __usb_driver) \
module_driver(__comedi_driver, comedi_usb_driver_register, \
comedi_usb_driver_unregister, &(__usb_driver))
#endif /* CONFIG_COMEDI_USB_DRIVERS */
#endif /* _COMEDIDEV_H */
......@@ -26,7 +26,6 @@
#include <linux/pci.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <linux/usb.h>
#include <linux/errno.h>
#include <linux/kconfig.h>
#include <linux/kernel.h>
......@@ -593,34 +592,3 @@ void comedi_pcmcia_driver_unregister(struct comedi_driver *comedi_driver,
EXPORT_SYMBOL_GPL(comedi_pcmcia_driver_unregister);
#endif
#if IS_ENABLED(CONFIG_USB)
int comedi_usb_driver_register(struct comedi_driver *comedi_driver,
struct usb_driver *usb_driver)
{
int ret;
ret = comedi_driver_register(comedi_driver);
if (ret < 0)
return ret;
ret = usb_register(usb_driver);
if (ret < 0) {
comedi_driver_unregister(comedi_driver);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_register);
void comedi_usb_driver_unregister(struct comedi_driver *comedi_driver,
struct usb_driver *usb_driver)
{
usb_deregister(usb_driver);
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
#endif
......@@ -29,6 +29,8 @@
* source code.
*/
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
......
......@@ -29,6 +29,8 @@
* this source code.
*/
#include <linux/interrupt.h>
#include "../comedidev.h"
#include "addi_watchdog.h"
#include "comedi_fc.h"
......
......@@ -29,6 +29,9 @@
* this source code.
*/
#include <linux/interrupt.h>
#include <linux/sched.h>
#include "../comedidev.h"
#include "comedi_fc.h"
#include "amcc_s5933.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment