arm64: dts: qcom: qrb5165-rb5: fix uSD pins drive strength

Lower drive strength for microSD data and CMD pins from 16 to 10. This
fixes spurious card removal issues observed on some boards. Also this
change allows us to re-enable 1.8V support, which seems to work with
lowered drive strength.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Fixes: 53a8ccf1 ("arm64: dts: qcom: rb5: Add support for uSD card")
Link: https://lore.kernel.org/r/20201217183341.3186402-1-dmitry.baryshkov@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts

@@ -660,8 +660,6 @@ &sdhc_2 {
 	vqmmc-supply = <&vreg_l6c_2p96>;
 	cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	/* there seem to be issues with HS400-1.8V mode, so disable it */
-	no-1-8-v;
 	no-sdio;
 	no-emmc;
 };
@@ -982,13 +980,13 @@ clk {
 		cmd {
 			pins = "sdc2_cmd";
 			bias-pull-up;
-			drive-strength = <16>;
+			drive-strength = <10>;
 		};
 
 		data {
 			pins = "sdc2_data";
 			bias-pull-up;
-			drive-strength = <16>;
+			drive-strength = <10>;
 		};
 	};