clk: stm32f4: fix timeout management for pll and ready gate

Use a classic polling to test bit ready.
And the shift of the bit ready of LSE & LSI were wrongs.

Fixes: 861adc44 ("clk: stm32f4: Add LSI & LSE clocks")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Michael Turquette <mturquette@baylibre.com>

drivers/clk/clk-stm32f4.c

@@ -531,19 +531,26 @@ static int stm32f4_pll_is_enabled(struct clk_hw *hw)
 	return clk_gate_ops.is_enabled(hw);
 }
 
+#define PLL_TIMEOUT 10000
+
 static int stm32f4_pll_enable(struct clk_hw *hw)
 {
 	struct clk_gate *gate = to_clk_gate(hw);
 	struct stm32f4_pll *pll = to_stm32f4_pll(gate);
-	int ret = 0;
-	unsigned long reg;
+	int bit_status;
+	unsigned int timeout = PLL_TIMEOUT;
 
-	ret = clk_gate_ops.enable(hw);
+	if (clk_gate_ops.is_enabled(hw))
+		return 0;
+
+	clk_gate_ops.enable(hw);
 
-	ret = readl_relaxed_poll_timeout_atomic(base + STM32F4_RCC_CR, reg,
-			reg & (1 << pll->bit_rdy_idx), 0, 10000);
+	do {
+		bit_status = !(readl(gate->reg) & BIT(pll->bit_rdy_idx));
 
-	return ret;
+	} while (bit_status && --timeout);
+
+	return bit_status;
 }
 
 static void stm32f4_pll_disable(struct clk_hw *hw)
@@ -834,24 +841,32 @@ struct stm32_rgate {
 	u8	bit_rdy_idx;
 };
 
-#define RTC_TIMEOUT 1000000
+#define RGATE_TIMEOUT 50000
 
 static int rgclk_enable(struct clk_hw *hw)
 {
 	struct clk_gate *gate = to_clk_gate(hw);
 	struct stm32_rgate *rgate = to_rgclk(gate);
-	u32 reg;
-	int ret;
+	int bit_status;
+	unsigned int timeout = RGATE_TIMEOUT;
+
+	if (clk_gate_ops.is_enabled(hw))
+		return 0;
 
 	disable_power_domain_write_protection();
 
 	clk_gate_ops.enable(hw);
 
-	ret = readl_relaxed_poll_timeout_atomic(gate->reg, reg,
-			reg & rgate->bit_rdy_idx, 1000, RTC_TIMEOUT);
+	do {
+		bit_status = !(readl(gate->reg) & BIT(rgate->bit_rdy_idx));
+		if (bit_status)
+			udelay(100);
+
+	} while (bit_status && --timeout);
 
 	enable_power_domain_write_protection();
-	return ret;
+
+	return bit_status;
 }
 
 static void rgclk_disable(struct clk_hw *hw)
@@ -1533,7 +1548,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	}
 
 	clks[CLK_LSI] = clk_register_rgate(NULL, "lsi", "clk-lsi", 0,
-			base + STM32F4_RCC_CSR, 0, 2, 0, &stm32f4_clk_lock);
+			base + STM32F4_RCC_CSR, 0, 1, 0, &stm32f4_clk_lock);
 
 	if (IS_ERR(clks[CLK_LSI])) {
 		pr_err("Unable to register lsi clock\n");
@@ -1541,7 +1556,7 @@ static void __init stm32f4_rcc_init(struct device_node *np)
 	}
 
 	clks[CLK_LSE] = clk_register_rgate(NULL, "lse", "clk-lse", 0,
-			base + STM32F4_RCC_BDCR, 0, 2, 0, &stm32f4_clk_lock);
+			base + STM32F4_RCC_BDCR, 0, 1, 0, &stm32f4_clk_lock);
 
 	if (IS_ERR(clks[CLK_LSE])) {
 		pr_err("Unable to register lse clock\n");