powerpc/85xx: Workaroudn e500 CPU erratum A005
This erratum can occur if a single-precision floating-point, double-precision floating-point or vector floating-point instruction on a mispredicted branch path signals one of the floating-point data interrupts which are enabled by the SPEFSCR (FINVE, FDBZE, FUNFE or FOVFE bits). This interrupt must be recorded in a one-cycle window when the misprediction is resolved. If this extremely rare event should occur, the result could be: The SPE Data Exception from the mispredicted path may be reported erroneously if a single-precision floating-point, double-precision floating-point or vector floating-point instruction is the second instruction on the correct branch path. According to errata description, some efp instructions which are not supposed to trigger SPE exceptions can trigger the exceptions in this case. However, as we haven't emulated these instructions here, a signal will send to userspace, and userspace application would exit. This patch re-issue the efp instruction that we haven't emulated, so that hardware can properly execute it again if this case happen. Signed-off-by: Liu Yu <yu.liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Showing
Please register or sign in to comment