ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers

Drivers should no longer use omap_read/write functions
but instead use ioremap + read/write functions.

As some USB legacy code is still shared between omap1 and
omap2420, let's limit the omap_read/write to plat/usb.h.

Note that the long term fix is to update the drivers to
use ioremap and read/write functions. That can now be
done as a separate patch series that is limited to the
USB drivers.

Also make sure the legacy omap1-keypad.c driver builds
if selected for 2420 based systems.

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap2/common.h

@@ -242,15 +242,5 @@ struct omap_sdrc_params;
 extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1);
 
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-extern u8 omap_readb(u32 pa);
-extern u16 omap_readw(u32 pa);
-extern u32 omap_readl(u32 pa);
-extern void omap_writeb(u8 v, u32 pa);
-extern void omap_writew(u16 v, u32 pa);
-extern void omap_writel(u32 v, u32 pa);
-
 #endif /* __ASSEMBLER__ */
 #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */

arch/arm/mach-omap2/io.c

@@ -487,43 +487,3 @@ void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 		_omap2_init_reprogram_sdrc();
 	}
 }
-
-/*
- * NOTE: Please use ioremap + __raw_read/write where possible instead of these
- */
-
-u8 omap_readb(u32 pa)
-{
-	return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readb);
-
-u16 omap_readw(u32 pa)
-{
-	return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readw);
-
-u32 omap_readl(u32 pa)
-{
-	return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_readl);
-
-void omap_writeb(u8 v, u32 pa)
-{
-	__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writeb);
-
-void omap_writew(u16 v, u32 pa)
-{
-	__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writew);
-
-void omap_writel(u32 v, u32 pa)
-{
-	__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
-}
-EXPORT_SYMBOL(omap_writel);

arch/arm/plat-omap/include/plat/keypad.h

@@ -12,6 +12,8 @@
 
 #ifndef CONFIG_ARCH_OMAP1
 #warning Please update the board to use matrix-keypad driver
+#define omap_readw(reg)		0
+#define omap_writew(val, reg)	do {} while (0)
 #endif
 #include <linux/input/matrix_keypad.h>
 

arch/arm/plat-omap/include/plat/usb.h

@@ -3,6 +3,7 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
+#include <linux/io.h>
 #include <linux/usb/musb.h>
 #include <plat/board.h>
 
@@ -105,6 +106,46 @@ extern int omap4430_phy_set_clk(struct device *dev, int on);
 extern int omap4430_phy_init(struct device *dev);
 extern int omap4430_phy_exit(struct device *dev);
 extern int omap4430_phy_suspend(struct device *dev, int suspend);
+
+/*
+ * NOTE: Please update omap USB drivers to use ioremap + read/write
+ */
+
+#define OMAP2_L4_IO_OFFSET	0xb2000000
+#define IOMEM(x)		((void __force __iomem *)(x))
+#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET)
+
+static inline u8 omap_readb(u32 pa)
+{
+	return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u16 omap_readw(u32 pa)
+{
+	return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline u32 omap_readl(u32 pa)
+{
+	return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writeb(u8 v, u32 pa)
+{
+	__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+
+static inline void omap_writew(u16 v, u32 pa)
+{
+	__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
+static inline void omap_writel(u32 v, u32 pa)
+{
+	__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
+}
+
 #endif
 
 extern void am35x_musb_reset(void);