pwm: ab8500: Implement .apply instead of .config, .enable and .disable

To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

drivers/pwm/pwm-ab8500.c

@@ -24,23 +24,37 @@ struct ab8500_pwm_chip {
 	struct pwm_chip chip;
 };
 
-static int ab8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			     int duty_ns, int period_ns)
+static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
 {
-	int ret = 0;
-	unsigned int higher_val, lower_val;
+	int ret;
 	u8 reg;
+	unsigned int higher_val, lower_val;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		ret = abx500_mask_and_set_register_interruptible(chip->dev,
+					AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
+					1 << (chip->base - 1), 0);
+
+		if (ret < 0)
+			dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
+								pwm->label, ret);
+		return ret;
+	}
 
 	/*
 	 * get the first 8 bits that are be written to
 	 * AB8500_PWM_OUT_CTRL1_REG[0:7]
 	 */
-	lower_val = duty_ns & 0x00FF;
+	lower_val = state->duty_cycle & 0x00FF;
 	/*
 	 * get bits [9:10] that are to be written to
 	 * AB8500_PWM_OUT_CTRL2_REG[0:1]
 	 */
-	higher_val = ((duty_ns & 0x0300) >> 8);
+	higher_val = ((state->duty_cycle & 0x0300) >> 8);
 
 	reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2);
 
@@ -48,15 +62,11 @@ static int ab8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 			reg, (u8)lower_val);
 	if (ret < 0)
 		return ret;
+
 	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
 			(reg + 1), (u8)higher_val);
-
-	return ret;
-}
-
-static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	int ret;
+	if (ret < 0)
+		return ret;
 
 	ret = abx500_mask_and_set_register_interruptible(chip->dev,
 				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
@@ -64,25 +74,12 @@ static int ab8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	if (ret < 0)
 		dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
 							pwm->label, ret);
-	return ret;
-}
 
-static void ab8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	int ret;
-
-	ret = abx500_mask_and_set_register_interruptible(chip->dev,
-				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
-				1 << (chip->base - 1), 0);
-	if (ret < 0)
-		dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
-							pwm->label, ret);
+	return ret;
 }
 
 static const struct pwm_ops ab8500_pwm_ops = {
-	.config = ab8500_pwm_config,
-	.enable = ab8500_pwm_enable,
-	.disable = ab8500_pwm_disable,
+	.apply = ab8500_pwm_apply,
 	.owner = THIS_MODULE,
 };