crypto: ccp - Support register differences between PSP devices

In preparation for adding a new PSP device ID that uses different register
offsets, add support to the PSP version data for register offset values.
And then update the code to use these new register offset values.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Gary R Hook <gary.hook@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/ccp/psp-dev.c

@@ -62,14 +62,14 @@ static irqreturn_t psp_irq_handler(int irq, void *data)
 	int reg;
 
 	/* Read the interrupt status: */
-	status = ioread32(psp->io_regs + PSP_P2CMSG_INTSTS);
+	status = ioread32(psp->io_regs + psp->vdata->intsts_reg);
 
 	/* Check if it is command completion: */
 	if (!(status & PSP_CMD_COMPLETE))
 		goto done;
 
 	/* Check if it is SEV command completion: */
-	reg = ioread32(psp->io_regs + PSP_CMDRESP);
+	reg = ioread32(psp->io_regs + psp->vdata->cmdresp_reg);
 	if (reg & PSP_CMDRESP_RESP) {
 		psp->sev_int_rcvd = 1;
 		wake_up(&psp->sev_int_queue);
@@ -77,7 +77,7 @@ static irqreturn_t psp_irq_handler(int irq, void *data)
 
 done:
 	/* Clear the interrupt status by writing the same value we read. */
-	iowrite32(status, psp->io_regs + PSP_P2CMSG_INTSTS);
+	iowrite32(status, psp->io_regs + psp->vdata->intsts_reg);
 
 	return IRQ_HANDLED;
 }
@@ -85,7 +85,7 @@ static irqreturn_t psp_irq_handler(int irq, void *data)
 static void sev_wait_cmd_ioc(struct psp_device *psp, unsigned int *reg)
 {
 	wait_event(psp->sev_int_queue, psp->sev_int_rcvd);
-	*reg = ioread32(psp->io_regs + PSP_CMDRESP);
+	*reg = ioread32(psp->io_regs + psp->vdata->cmdresp_reg);
 }
 
 static int sev_cmd_buffer_len(int cmd)
@@ -143,15 +143,15 @@ static int __sev_do_cmd_locked(int cmd, void *data, int *psp_ret)
 	print_hex_dump_debug("(in):  ", DUMP_PREFIX_OFFSET, 16, 2, data,
 			     sev_cmd_buffer_len(cmd), false);
 
-	iowrite32(phys_lsb, psp->io_regs + PSP_CMDBUFF_ADDR_LO);
-	iowrite32(phys_msb, psp->io_regs + PSP_CMDBUFF_ADDR_HI);
+	iowrite32(phys_lsb, psp->io_regs + psp->vdata->cmdbuff_addr_lo_reg);
+	iowrite32(phys_msb, psp->io_regs + psp->vdata->cmdbuff_addr_hi_reg);
 
 	psp->sev_int_rcvd = 0;
 
 	reg = cmd;
 	reg <<= PSP_CMDRESP_CMD_SHIFT;
 	reg |= PSP_CMDRESP_IOC;
-	iowrite32(reg, psp->io_regs + PSP_CMDRESP);
+	iowrite32(reg, psp->io_regs + psp->vdata->cmdresp_reg);
 
 	/* wait for command completion */
 	sev_wait_cmd_ioc(psp, &reg);
@@ -789,7 +789,7 @@ static int sev_misc_init(struct psp_device *psp)
 static int sev_init(struct psp_device *psp)
 {
 	/* Check if device supports SEV feature */
-	if (!(ioread32(psp->io_regs + PSP_FEATURE_REG) & 1)) {
+	if (!(ioread32(psp->io_regs + psp->vdata->feature_reg) & 1)) {
 		dev_dbg(psp->dev, "device does not support SEV\n");
 		return 1;
 	}
@@ -817,11 +817,11 @@ int psp_dev_init(struct sp_device *sp)
 		goto e_err;
 	}
 
-	psp->io_regs = sp->io_map + psp->vdata->offset;
+	psp->io_regs = sp->io_map;
 
 	/* Disable and clear interrupts until ready */
-	iowrite32(0, psp->io_regs + PSP_P2CMSG_INTEN);
-	iowrite32(-1, psp->io_regs + PSP_P2CMSG_INTSTS);
+	iowrite32(0, psp->io_regs + psp->vdata->inten_reg);
+	iowrite32(-1, psp->io_regs + psp->vdata->intsts_reg);
 
 	/* Request an irq */
 	ret = sp_request_psp_irq(psp->sp, psp_irq_handler, psp->name, psp);
@@ -838,7 +838,7 @@ int psp_dev_init(struct sp_device *sp)
 		sp->set_psp_master_device(sp);
 
 	/* Enable interrupt */
-	iowrite32(-1, psp->io_regs + PSP_P2CMSG_INTEN);
+	iowrite32(-1, psp->io_regs + psp->vdata->inten_reg);
 
 	dev_notice(dev, "psp enabled\n");
 

drivers/crypto/ccp/psp-dev.h

@@ -30,17 +30,8 @@
 
 #include "sp-dev.h"
 
-#define PSP_C2PMSG(_num)		((_num) << 2)
-#define PSP_CMDRESP			PSP_C2PMSG(32)
-#define PSP_CMDBUFF_ADDR_LO		PSP_C2PMSG(56)
-#define PSP_CMDBUFF_ADDR_HI             PSP_C2PMSG(57)
-#define PSP_FEATURE_REG			PSP_C2PMSG(63)
-
 #define PSP_CMD_COMPLETE		BIT(1)
 
-#define PSP_P2CMSG_INTEN		0x0110
-#define PSP_P2CMSG_INTSTS		0x0114
-
 #define PSP_CMDRESP_CMD_SHIFT		16
 #define PSP_CMDRESP_IOC			BIT(0)
 #define PSP_CMDRESP_RESP		BIT(31)

drivers/crypto/ccp/sp-dev.h

@@ -44,7 +44,12 @@ struct ccp_vdata {
 };
 
 struct psp_vdata {
-	const unsigned int offset;
+	const unsigned int cmdresp_reg;
+	const unsigned int cmdbuff_addr_lo_reg;
+	const unsigned int cmdbuff_addr_hi_reg;
+	const unsigned int feature_reg;
+	const unsigned int inten_reg;
+	const unsigned int intsts_reg;
 };
 
 /* Structure to hold SP device data */

drivers/crypto/ccp/sp-pci.c

@@ -270,7 +270,12 @@ static int sp_pci_resume(struct pci_dev *pdev)
 
 #ifdef CONFIG_CRYPTO_DEV_SP_PSP
 static const struct psp_vdata psp_entry = {
-	.offset = 0x10500,
+	.cmdresp_reg		= 0x10580,
+	.cmdbuff_addr_lo_reg	= 0x105e0,
+	.cmdbuff_addr_hi_reg	= 0x105e4,
+	.feature_reg		= 0x105fc,
+	.inten_reg		= 0x10610,
+	.intsts_reg		= 0x10614,
 };
 #endif