Commit ad425666 authored by Chunhao Lin's avatar Chunhao Lin Committed by David S. Miller

r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()

There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".
Signed-off-by: default avatarChunhao Lin <hau@realtek.com>
Reviewed-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent e71460d4
......@@ -2210,28 +2210,6 @@ static int rtl_set_mac_address(struct net_device *dev, void *p)
return 0;
}
static void rtl_wol_enable_rx(struct rtl8169_private *tp)
{
if (tp->mac_version >= RTL_GIGA_MAC_VER_25)
RTL_W32(tp, RxConfig, RTL_R32(tp, RxConfig) |
AcceptBroadcast | AcceptMulticast | AcceptMyPhys);
}
static void rtl_prepare_power_down(struct rtl8169_private *tp)
{
if (tp->dash_type != RTL_DASH_NONE)
return;
if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
tp->mac_version == RTL_GIGA_MAC_VER_33)
rtl_ephy_write(tp, 0x19, 0xff64);
if (device_may_wakeup(tp_to_dev(tp))) {
phy_speed_down(tp->phydev, false);
rtl_wol_enable_rx(tp);
}
}
static void rtl_init_rxcfg(struct rtl8169_private *tp)
{
switch (tp->mac_version) {
......@@ -2455,6 +2433,28 @@ static void rtl_enable_rxdvgate(struct rtl8169_private *tp)
rtl_wait_txrx_fifo_empty(tp);
}
static void rtl_wol_enable_rx(struct rtl8169_private *tp)
{
if (tp->mac_version >= RTL_GIGA_MAC_VER_25)
RTL_W32(tp, RxConfig, RTL_R32(tp, RxConfig) |
AcceptBroadcast | AcceptMulticast | AcceptMyPhys);
}
static void rtl_prepare_power_down(struct rtl8169_private *tp)
{
if (tp->dash_type != RTL_DASH_NONE)
return;
if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
tp->mac_version == RTL_GIGA_MAC_VER_33)
rtl_ephy_write(tp, 0x19, 0xff64);
if (device_may_wakeup(tp_to_dev(tp))) {
phy_speed_down(tp->phydev, false);
rtl_wol_enable_rx(tp);
}
}
static void rtl_set_tx_config_registers(struct rtl8169_private *tp)
{
u32 val = TX_DMA_BURST << TxDMAShift |
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment