Commit ad4d5304 authored by Larry Finger's avatar Larry Finger Committed by Greg Kroah-Hartman

rtlwifi: btcoexist: Implement antenna selection

commit baa17022 upstream.

The previous patch added an option to rtl8723be to manually select the
antenna for those cases when only a single antenna is present, and the
on-board EEPROM is incorrectly programmed. This patch implements the
necessary changes in the Bluetooth coexistence driver.
Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5618e882
......@@ -1203,7 +1203,6 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
/* Force GNT_BT to low */
btcoexist->btc_write_1byte_bitmask(btcoexist, 0x765, 0x18, 0x0);
btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT) {
/* tell firmware "no antenna inverse" */
......@@ -1211,19 +1210,25 @@ static void btc8723b2ant_set_ant_path(struct btc_coexist *btcoexist,
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
} else {
/* tell firmware "antenna inverse" */
h2c_parameter[0] = 1;
h2c_parameter[1] = 1; /* ext switch type */
btcoexist->btc_fill_h2c(btcoexist, 0x65, 2,
h2c_parameter);
btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
}
}
/* ext switch setting */
if (use_ext_switch) {
/* fixed internal switch S1->WiFi, S0->BT */
btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
if (board_info->btdm_ant_pos == BTC_ANTENNA_AT_MAIN_PORT)
btcoexist->btc_write_2byte(btcoexist, 0x948, 0x0);
else
btcoexist->btc_write_2byte(btcoexist, 0x948, 0x280);
switch (antpos_type) {
case BTC_ANT_WIFI_AT_MAIN:
/* ext switch main at wifi */
......
......@@ -965,13 +965,38 @@ void exhalbtc_set_chip_type(u8 chip_type)
}
}
void exhalbtc_set_ant_num(u8 type, u8 ant_num)
void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num)
{
if (BT_COEX_ANT_TYPE_PG == type) {
gl_bt_coexist.board_info.pg_ant_num = ant_num;
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
/* The antenna position:
* Main (default) or Aux for pgAntNum=2 && btdmAntNum =1.
* The antenna position should be determined by
* auto-detect mechanism.
* The following is assumed to main,
* and those must be modified
* if y auto-detect mechanism is ready
*/
if ((gl_bt_coexist.board_info.pg_ant_num == 2) &&
(gl_bt_coexist.board_info.btdm_ant_num == 1))
gl_bt_coexist.board_info.btdm_ant_pos =
BTC_ANTENNA_AT_MAIN_PORT;
else
gl_bt_coexist.board_info.btdm_ant_pos =
BTC_ANTENNA_AT_MAIN_PORT;
} else if (BT_COEX_ANT_TYPE_ANTDIV == type) {
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
gl_bt_coexist.board_info.btdm_ant_pos =
BTC_ANTENNA_AT_MAIN_PORT;
} else if (type == BT_COEX_ANT_TYPE_DETECTED) {
gl_bt_coexist.board_info.btdm_ant_num = ant_num;
if (rtlpriv->cfg->mod_params->ant_sel == 1)
gl_bt_coexist.board_info.btdm_ant_pos =
BTC_ANTENNA_AT_AUX_PORT;
else
gl_bt_coexist.board_info.btdm_ant_pos =
BTC_ANTENNA_AT_MAIN_PORT;
}
}
......
......@@ -535,7 +535,7 @@ void exhalbtc_set_bt_patch_version(u16 bt_hci_version, u16 bt_patch_version);
void exhalbtc_update_min_bt_rssi(char bt_rssi);
void exhalbtc_set_bt_exist(bool bt_exist);
void exhalbtc_set_chip_type(u8 chip_type);
void exhalbtc_set_ant_num(u8 type, u8 ant_num);
void exhalbtc_set_ant_num(struct rtl_priv *rtlpriv, u8 type, u8 ant_num);
void exhalbtc_display_bt_coex_info(struct btc_coexist *btcoexist);
void exhalbtc_signal_compensation(struct btc_coexist *btcoexist,
u8 *rssi_wifi, u8 *rssi_bt);
......
......@@ -72,7 +72,10 @@ void rtl_btc_init_hal_vars(struct rtl_priv *rtlpriv)
__func__, bt_type);
exhalbtc_set_chip_type(bt_type);
exhalbtc_set_ant_num(BT_COEX_ANT_TYPE_PG, ant_num);
if (rtlpriv->cfg->mod_params->ant_sel == 1)
exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_DETECTED, 1);
else
exhalbtc_set_ant_num(rtlpriv, BT_COEX_ANT_TYPE_PG, ant_num);
}
void rtl_btc_init_hw_config(struct rtl_priv *rtlpriv)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment