ARM: OMAP1: move lcd pdata out of arch/arm/*

omap1 lcd platform data resides inside plat/board.h while it
should be inside include/linux/...
Move the omap1 lcd platform data to include/linux/omapfb.h.
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/board-ams-delta.c

@@ -37,7 +37,6 @@
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
-#include <plat/board.h>
 
 #include <mach/hardware.h>
 #include <mach/ams-delta-fiq.h>

arch/arm/mach-omap1/board-fsample.c

@@ -32,7 +32,6 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include <plat/board.h>
 
 #include <mach/hardware.h>
 

arch/arm/mach-omap1/board-htcherald.c

@@ -42,7 +42,6 @@
 #include <asm/mach/arch.h>
 
 #include <plat/omap7xx.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/mmc.h>
 

arch/arm/mach-omap1/board-nokia770.c

@@ -26,7 +26,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/mux.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>

arch/arm/mach-omap1/board-palmte.c

@@ -38,7 +38,6 @@
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/dma.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
 

arch/arm/mach-omap1/board-palmtt.c

@@ -38,7 +38,6 @@
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
 

arch/arm/mach-omap1/board-palmz71.c

@@ -40,7 +40,6 @@
 #include <plat/mux.h>
 #include <plat/dma.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
 

arch/arm/mach-omap1/board-perseus2.c

@@ -32,7 +32,6 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include <plat/board.h>
 
 #include <mach/hardware.h>
 

arch/arm/mach-omap1/board-sx1.c

@@ -38,7 +38,6 @@
 #include <plat/dma.h>
 #include <plat/irda.h>
 #include <plat/tc.h>
-#include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
 

arch/arm/plat-omap/fb.c

@@ -33,8 +33,6 @@
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <plat/board.h>
-
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
 static bool omapfb_lcd_configured;

arch/arm/plat-omap/include/plat/board.h

@@ -12,13 +12,6 @@
 
 #include <linux/types.h>
 
-struct omap_lcd_config {
-	char panel_name[16];
-	char ctrl_name[16];
-	s16  nreset_gpio;
-	u8   data_lines;
-};
-
 /* for TI reference platforms sharing the same debug card */
 extern int debug_card_init(u32 addr, unsigned gpio);
 

include/linux/omapfb.h

@@ -220,7 +220,12 @@ struct omapfb_display_info {
 
 #ifdef __KERNEL__
 
-#include <plat/board.h>
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
 
 struct omapfb_platform_data {
 	struct omap_lcd_config		lcd;