Commit ada1ae68 authored by Reiji Watanabe's avatar Reiji Watanabe Committed by Oliver Upton

KVM: selftests: aarch64: vPMU register test for implemented counters

Add a new test case to the vpmu_counter_access test to check if PMU
registers or their bits for implemented counters on the vCPU are
readable/writable as expected, and can be programmed to count events.
Signed-off-by: default avatarReiji Watanabe <reijiw@google.com>
Signed-off-by: default avatarRaghavendra Rao Ananta <rananta@google.com>
Signed-off-by: default avatarMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-11-rananta@google.comSigned-off-by: default avatarOliver Upton <oliver.upton@linux.dev>
parent 8d0aebe1
......@@ -5,7 +5,8 @@
* Copyright (c) 2023 Google LLC.
*
* This test checks if the guest can see the same number of the PMU event
* counters (PMCR_EL0.N) that userspace sets.
* counters (PMCR_EL0.N) that userspace sets, and if the guest can access
* those counters.
* This test runs only when KVM_CAP_ARM_PMU_V3 is supported on the host.
*/
#include <kvm_util.h>
......@@ -37,6 +38,255 @@ static void set_pmcr_n(uint64_t *pmcr, uint64_t pmcr_n)
*pmcr |= (pmcr_n << ARMV8_PMU_PMCR_N_SHIFT);
}
/* Read PMEVTCNTR<n>_EL0 through PMXEVCNTR_EL0 */
static inline unsigned long read_sel_evcntr(int sel)
{
write_sysreg(sel, pmselr_el0);
isb();
return read_sysreg(pmxevcntr_el0);
}
/* Write PMEVTCNTR<n>_EL0 through PMXEVCNTR_EL0 */
static inline void write_sel_evcntr(int sel, unsigned long val)
{
write_sysreg(sel, pmselr_el0);
isb();
write_sysreg(val, pmxevcntr_el0);
isb();
}
/* Read PMEVTYPER<n>_EL0 through PMXEVTYPER_EL0 */
static inline unsigned long read_sel_evtyper(int sel)
{
write_sysreg(sel, pmselr_el0);
isb();
return read_sysreg(pmxevtyper_el0);
}
/* Write PMEVTYPER<n>_EL0 through PMXEVTYPER_EL0 */
static inline void write_sel_evtyper(int sel, unsigned long val)
{
write_sysreg(sel, pmselr_el0);
isb();
write_sysreg(val, pmxevtyper_el0);
isb();
}
static inline void enable_counter(int idx)
{
uint64_t v = read_sysreg(pmcntenset_el0);
write_sysreg(BIT(idx) | v, pmcntenset_el0);
isb();
}
static inline void disable_counter(int idx)
{
uint64_t v = read_sysreg(pmcntenset_el0);
write_sysreg(BIT(idx) | v, pmcntenclr_el0);
isb();
}
static void pmu_disable_reset(void)
{
uint64_t pmcr = read_sysreg(pmcr_el0);
/* Reset all counters, disabling them */
pmcr &= ~ARMV8_PMU_PMCR_E;
write_sysreg(pmcr | ARMV8_PMU_PMCR_P, pmcr_el0);
isb();
}
#define RETURN_READ_PMEVCNTRN(n) \
return read_sysreg(pmevcntr##n##_el0)
static unsigned long read_pmevcntrn(int n)
{
PMEVN_SWITCH(n, RETURN_READ_PMEVCNTRN);
return 0;
}
#define WRITE_PMEVCNTRN(n) \
write_sysreg(val, pmevcntr##n##_el0)
static void write_pmevcntrn(int n, unsigned long val)
{
PMEVN_SWITCH(n, WRITE_PMEVCNTRN);
isb();
}
#define READ_PMEVTYPERN(n) \
return read_sysreg(pmevtyper##n##_el0)
static unsigned long read_pmevtypern(int n)
{
PMEVN_SWITCH(n, READ_PMEVTYPERN);
return 0;
}
#define WRITE_PMEVTYPERN(n) \
write_sysreg(val, pmevtyper##n##_el0)
static void write_pmevtypern(int n, unsigned long val)
{
PMEVN_SWITCH(n, WRITE_PMEVTYPERN);
isb();
}
/*
* The pmc_accessor structure has pointers to PMEV{CNTR,TYPER}<n>_EL0
* accessors that test cases will use. Each of the accessors will
* either directly reads/writes PMEV{CNTR,TYPER}<n>_EL0
* (i.e. {read,write}_pmev{cnt,type}rn()), or reads/writes them through
* PMXEV{CNTR,TYPER}_EL0 (i.e. {read,write}_sel_ev{cnt,type}r()).
*
* This is used to test that combinations of those accessors provide
* the consistent behavior.
*/
struct pmc_accessor {
/* A function to be used to read PMEVTCNTR<n>_EL0 */
unsigned long (*read_cntr)(int idx);
/* A function to be used to write PMEVTCNTR<n>_EL0 */
void (*write_cntr)(int idx, unsigned long val);
/* A function to be used to read PMEVTYPER<n>_EL0 */
unsigned long (*read_typer)(int idx);
/* A function to be used to write PMEVTYPER<n>_EL0 */
void (*write_typer)(int idx, unsigned long val);
};
struct pmc_accessor pmc_accessors[] = {
/* test with all direct accesses */
{ read_pmevcntrn, write_pmevcntrn, read_pmevtypern, write_pmevtypern },
/* test with all indirect accesses */
{ read_sel_evcntr, write_sel_evcntr, read_sel_evtyper, write_sel_evtyper },
/* read with direct accesses, and write with indirect accesses */
{ read_pmevcntrn, write_sel_evcntr, read_pmevtypern, write_sel_evtyper },
/* read with indirect accesses, and write with direct accesses */
{ read_sel_evcntr, write_pmevcntrn, read_sel_evtyper, write_pmevtypern },
};
/*
* Convert a pointer of pmc_accessor to an index in pmc_accessors[],
* assuming that the pointer is one of the entries in pmc_accessors[].
*/
#define PMC_ACC_TO_IDX(acc) (acc - &pmc_accessors[0])
#define GUEST_ASSERT_BITMAP_REG(regname, mask, set_expected) \
{ \
uint64_t _tval = read_sysreg(regname); \
\
if (set_expected) \
__GUEST_ASSERT((_tval & mask), \
"tval: 0x%lx; mask: 0x%lx; set_expected: 0x%lx", \
_tval, mask, set_expected); \
else \
__GUEST_ASSERT(!(_tval & mask), \
"tval: 0x%lx; mask: 0x%lx; set_expected: 0x%lx", \
_tval, mask, set_expected); \
}
/*
* Check if @mask bits in {PMCNTEN,PMINTEN,PMOVS}{SET,CLR} registers
* are set or cleared as specified in @set_expected.
*/
static void check_bitmap_pmu_regs(uint64_t mask, bool set_expected)
{
GUEST_ASSERT_BITMAP_REG(pmcntenset_el0, mask, set_expected);
GUEST_ASSERT_BITMAP_REG(pmcntenclr_el0, mask, set_expected);
GUEST_ASSERT_BITMAP_REG(pmintenset_el1, mask, set_expected);
GUEST_ASSERT_BITMAP_REG(pmintenclr_el1, mask, set_expected);
GUEST_ASSERT_BITMAP_REG(pmovsset_el0, mask, set_expected);
GUEST_ASSERT_BITMAP_REG(pmovsclr_el0, mask, set_expected);
}
/*
* Check if the bit in {PMCNTEN,PMINTEN,PMOVS}{SET,CLR} registers corresponding
* to the specified counter (@pmc_idx) can be read/written as expected.
* When @set_op is true, it tries to set the bit for the counter in
* those registers by writing the SET registers (the bit won't be set
* if the counter is not implemented though).
* Otherwise, it tries to clear the bits in the registers by writing
* the CLR registers.
* Then, it checks if the values indicated in the registers are as expected.
*/
static void test_bitmap_pmu_regs(int pmc_idx, bool set_op)
{
uint64_t pmcr_n, test_bit = BIT(pmc_idx);
bool set_expected = false;
if (set_op) {
write_sysreg(test_bit, pmcntenset_el0);
write_sysreg(test_bit, pmintenset_el1);
write_sysreg(test_bit, pmovsset_el0);
/* The bit will be set only if the counter is implemented */
pmcr_n = get_pmcr_n(read_sysreg(pmcr_el0));
set_expected = (pmc_idx < pmcr_n) ? true : false;
} else {
write_sysreg(test_bit, pmcntenclr_el0);
write_sysreg(test_bit, pmintenclr_el1);
write_sysreg(test_bit, pmovsclr_el0);
}
check_bitmap_pmu_regs(test_bit, set_expected);
}
/*
* Tests for reading/writing registers for the (implemented) event counter
* specified by @pmc_idx.
*/
static void test_access_pmc_regs(struct pmc_accessor *acc, int pmc_idx)
{
uint64_t write_data, read_data;
/* Disable all PMCs and reset all PMCs to zero. */
pmu_disable_reset();
/*
* Tests for reading/writing {PMCNTEN,PMINTEN,PMOVS}{SET,CLR}_EL1.
*/
/* Make sure that the bit in those registers are set to 0 */
test_bitmap_pmu_regs(pmc_idx, false);
/* Test if setting the bit in those registers works */
test_bitmap_pmu_regs(pmc_idx, true);
/* Test if clearing the bit in those registers works */
test_bitmap_pmu_regs(pmc_idx, false);
/*
* Tests for reading/writing the event type register.
*/
/*
* Set the event type register to an arbitrary value just for testing
* of reading/writing the register.
* Arm ARM says that for the event from 0x0000 to 0x003F,
* the value indicated in the PMEVTYPER<n>_EL0.evtCount field is
* the value written to the field even when the specified event
* is not supported.
*/
write_data = (ARMV8_PMU_EXCLUDE_EL1 | ARMV8_PMUV3_PERFCTR_INST_RETIRED);
acc->write_typer(pmc_idx, write_data);
read_data = acc->read_typer(pmc_idx);
__GUEST_ASSERT(read_data == write_data,
"pmc_idx: 0x%lx; acc_idx: 0x%lx; read_data: 0x%lx; write_data: 0x%lx",
pmc_idx, PMC_ACC_TO_IDX(acc), read_data, write_data);
/*
* Tests for reading/writing the event count register.
*/
read_data = acc->read_cntr(pmc_idx);
/* The count value must be 0, as it is disabled and reset */
__GUEST_ASSERT(read_data == 0,
"pmc_idx: 0x%lx; acc_idx: 0x%lx; read_data: 0x%lx",
pmc_idx, PMC_ACC_TO_IDX(acc), read_data);
write_data = read_data + pmc_idx + 0x12345;
acc->write_cntr(pmc_idx, write_data);
read_data = acc->read_cntr(pmc_idx);
__GUEST_ASSERT(read_data == write_data,
"pmc_idx: 0x%lx; acc_idx: 0x%lx; read_data: 0x%lx; write_data: 0x%lx",
pmc_idx, PMC_ACC_TO_IDX(acc), read_data, write_data);
}
static void guest_sync_handler(struct ex_regs *regs)
{
uint64_t esr, ec;
......@@ -49,11 +299,14 @@ static void guest_sync_handler(struct ex_regs *regs)
/*
* The guest is configured with PMUv3 with @expected_pmcr_n number of
* event counters.
* Check if @expected_pmcr_n is consistent with PMCR_EL0.N.
* Check if @expected_pmcr_n is consistent with PMCR_EL0.N, and
* if reading/writing PMU registers for implemented counters works
* as expected.
*/
static void guest_code(uint64_t expected_pmcr_n)
{
uint64_t pmcr, pmcr_n;
int i, pmc;
__GUEST_ASSERT(expected_pmcr_n <= ARMV8_PMU_MAX_GENERAL_COUNTERS,
"Expected PMCR.N: 0x%lx; ARMv8 general counters: 0x%lx",
......@@ -67,6 +320,15 @@ static void guest_code(uint64_t expected_pmcr_n)
"Expected PMCR.N: 0x%lx, PMCR.N: 0x%lx",
expected_pmcr_n, pmcr_n);
/*
* Tests for reading/writing PMU registers for implemented counters.
* Use each combination of PMEVT{CNTR,TYPER}<n>_EL0 accessor functions.
*/
for (i = 0; i < ARRAY_SIZE(pmc_accessors); i++) {
for (pmc = 0; pmc < pmcr_n; pmc++)
test_access_pmc_regs(&pmc_accessors[i], pmc);
}
GUEST_DONE();
}
......@@ -179,7 +441,7 @@ static void test_create_vpmu_vm_with_pmcr_n(uint64_t pmcr_n, bool expect_fail)
* Create a guest with one vCPU, set the PMCR_EL0.N for the vCPU to @pmcr_n,
* and run the test.
*/
static void run_test(uint64_t pmcr_n)
static void run_access_test(uint64_t pmcr_n)
{
uint64_t sp;
struct kvm_vcpu *vcpu;
......@@ -246,7 +508,7 @@ int main(void)
pmcr_n = get_pmcr_n_limit();
for (i = 0; i <= pmcr_n; i++)
run_test(i);
run_access_test(i);
for (i = pmcr_n + 1; i < ARMV8_PMU_MAX_COUNTERS; i++)
run_error_test(i);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment