Commit adfc5217 authored by Jeff Kirsher's avatar Jeff Kirsher

broadcom: Move the Broadcom drivers

Moves the drivers for Broadcom devices into
drivers/net/ethernet/broadcom/ and the necessary Kconfig and Makefile
changes.

CC: Eilon Greenstein <eilong@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
CC: Matt Carlson <mcarlson@broadcom.com>
CC: Gary Zambrano <zambrano@broadcom.com>
CC: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 644570b8
...@@ -1526,27 +1526,27 @@ BROADCOM B44 10/100 ETHERNET DRIVER ...@@ -1526,27 +1526,27 @@ BROADCOM B44 10/100 ETHERNET DRIVER
M: Gary Zambrano <zambrano@broadcom.com> M: Gary Zambrano <zambrano@broadcom.com>
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
S: Supported S: Supported
F: drivers/net/b44.* F: drivers/net/ethernet/broadcom/b44.*
BROADCOM BNX2 GIGABIT ETHERNET DRIVER BROADCOM BNX2 GIGABIT ETHERNET DRIVER
M: Michael Chan <mchan@broadcom.com> M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
S: Supported S: Supported
F: drivers/net/bnx2.* F: drivers/net/ethernet/broadcom/bnx2.*
F: drivers/net/bnx2_* F: drivers/net/ethernet/broadcom/bnx2_*
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
M: Eilon Greenstein <eilong@broadcom.com> M: Eilon Greenstein <eilong@broadcom.com>
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
S: Supported S: Supported
F: drivers/net/bnx2x/ F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM TG3 GIGABIT ETHERNET DRIVER BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Matt Carlson <mcarlson@broadcom.com> M: Matt Carlson <mcarlson@broadcom.com>
M: Michael Chan <mchan@broadcom.com> M: Michael Chan <mchan@broadcom.com>
L: netdev@vger.kernel.org L: netdev@vger.kernel.org
S: Supported S: Supported
F: drivers/net/tg3.* F: drivers/net/ethernet/broadcom/tg3.*
BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER BROADCOM BRCM80211 IEEE802.11n WIRELESS DRIVER
M: Brett Rudley <brudley@broadcom.com> M: Brett Rudley <brudley@broadcom.com>
......
...@@ -997,38 +997,6 @@ config APRICOT ...@@ -997,38 +997,6 @@ config APRICOT
To compile this driver as a module, choose M here. The module To compile this driver as a module, choose M here. The module
will be called apricot. will be called apricot.
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
help
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called b44.
# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
bool
depends on B44 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
default y
# Auto-select SSB PCICORE driver, if possible
config B44_PCICORE_AUTOSELECT
bool
depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
select SSB_DRIVER_PCICORE
default y
config B44_PCI
bool
depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
default y
config FORCEDETH config FORCEDETH
tristate "nForce Ethernet support" tristate "nForce Ethernet support"
depends on NET_PCI && PCI depends on NET_PCI && PCI
...@@ -1465,15 +1433,6 @@ config XILINX_EMACLITE ...@@ -1465,15 +1433,6 @@ config XILINX_EMACLITE
help help
This driver supports the 10/100 Ethernet Lite from Xilinx. This driver supports the 10/100 Ethernet Lite from Xilinx.
config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support"
depends on BCM63XX
select MII
select PHYLIB
help
This driver supports the ethernet MACs in the Broadcom 63xx
MIPS chipset family (BCM63XX).
config FTMAC100 config FTMAC100
tristate "Faraday FTMAC100 10/100 Ethernet support" tristate "Faraday FTMAC100 10/100 Ethernet support"
depends on ARM depends on ARM
...@@ -1683,19 +1642,6 @@ config R8169 ...@@ -1683,19 +1642,6 @@ config R8169
To compile this driver as a module, choose M here: the module To compile this driver as a module, choose M here: the module
will be called r8169. This is recommended. will be called r8169. This is recommended.
config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
---help---
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
and BCM1480 chips.
To compile this driver as a module, choose M here: the module
will be called sb1250-mac.
config SIS190 config SIS190
tristate "SiS190/SiS191 gigabit ethernet support" tristate "SiS190/SiS191 gigabit ethernet support"
depends on PCI depends on PCI
...@@ -1789,39 +1735,6 @@ config VIA_VELOCITY ...@@ -1789,39 +1735,6 @@ config VIA_VELOCITY
To compile this driver as a module, choose M here. The module To compile this driver as a module, choose M here. The module
will be called via-velocity. will be called via-velocity.
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
select PHYLIB
help
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
config BNX2
tristate "Broadcom NetXtremeII support"
depends on PCI
select CRC32
select FW_LOADER
help
This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
config CNIC
tristate "Broadcom CNIC support"
depends on PCI
select BNX2
select UIO
help
This driver supports offload features of Broadcom NetXtremeII
gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called cnic. This is recommended.
config SPIDER_NET config SPIDER_NET
tristate "Spider Gigabit Ethernet driver" tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
...@@ -2327,18 +2240,6 @@ config TEHUTI ...@@ -2327,18 +2240,6 @@ config TEHUTI
help help
Tehuti Networks 10G Ethernet NIC Tehuti Networks 10G Ethernet NIC
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
select MDIO
help
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
config QLCNIC config QLCNIC
tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support" tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
depends on PCI depends on PCI
......
...@@ -77,10 +77,6 @@ obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o ...@@ -77,10 +77,6 @@ obj-$(CONFIG_ISERIES_VETH) += iseries_veth.o
obj-$(CONFIG_NATSEMI) += natsemi.o obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_NS83820) += ns83820.o obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_TIGON3) += tg3.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_CNIC) += cnic.o
obj-$(CONFIG_BNX2X) += bnx2x/
spidernet-y += spider_net.o spider_net_ethtool.o spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
...@@ -117,10 +113,7 @@ obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o ...@@ -117,10 +113,7 @@ obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx.o
ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y) ifeq ($(CONFIG_FEC_MPC52xx_MDIO),y)
obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o obj-$(CONFIG_FEC_MPC52xx) += fec_mpc52xx_phy.o
endif endif
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o obj-$(CONFIG_FORCEDETH) += forcedeth.o
obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_FTGMAC100) += ftgmac100.o obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC100) += ftmac100.o obj-$(CONFIG_FTMAC100) += ftmac100.o
......
...@@ -14,5 +14,6 @@ if ETHERNET ...@@ -14,5 +14,6 @@ if ETHERNET
source "drivers/net/ethernet/3com/Kconfig" source "drivers/net/ethernet/3com/Kconfig"
source "drivers/net/ethernet/8390/Kconfig" source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/amd/Kconfig" source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
endif # ETHERNET endif # ETHERNET
...@@ -5,3 +5,4 @@ ...@@ -5,3 +5,4 @@
obj-$(CONFIG_NET_VENDOR_3COM) += 3com/ obj-$(CONFIG_NET_VENDOR_3COM) += 3com/
obj-$(CONFIG_NET_VENDOR_8390) += 8390/ obj-$(CONFIG_NET_VENDOR_8390) += 8390/
obj-$(CONFIG_NET_VENDOR_AMD) += amd/ obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
#
# Broadcom device configuration
#
config NET_VENDOR_BROADCOM
bool "Broadcom devices"
depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
SIBYTE_SB1xxx_SOC
---help---
If you have a network (Ethernet) chipset belonging to this class,
say Y.
Note that the answer to this question does not directly affect
the kernel: saying N will just case the configurator to skip all
the questions regarding AMD chipsets. If you say Y, you will be asked
for your specific chipset/driver in the following questions.
if NET_VENDOR_BROADCOM
config B44
tristate "Broadcom 440x/47xx ethernet support"
depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
---help---
If you have a network (Ethernet) controller of this type, say Y
or M and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here. The module
will be called b44.
# Auto-select SSB PCI-HOST support, if possible
config B44_PCI_AUTOSELECT
bool
depends on B44 && SSB_PCIHOST_POSSIBLE
select SSB_PCIHOST
default y
# Auto-select SSB PCICORE driver, if possible
config B44_PCICORE_AUTOSELECT
bool
depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
select SSB_DRIVER_PCICORE
default y
config B44_PCI
bool
depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
default y
config BCM63XX_ENET
tristate "Broadcom 63xx internal mac support"
depends on BCM63XX
select MII
select PHYLIB
help
This driver supports the ethernet MACs in the Broadcom 63xx
MIPS chipset family (BCM63XX).
config BNX2
tristate "Broadcom NetXtremeII support"
depends on PCI
select CRC32
select FW_LOADER
---help---
This driver supports Broadcom NetXtremeII gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2. This is recommended.
config CNIC
tristate "Broadcom CNIC support"
depends on PCI
select BNX2
select UIO
---help---
This driver supports offload features of Broadcom NetXtremeII
gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called cnic. This is recommended.
config SB1250_MAC
tristate "SB1250 Gigabit Ethernet support"
depends on SIBYTE_SB1xxx_SOC
select PHYLIB
---help---
This driver supports Gigabit Ethernet interfaces based on the
Broadcom SiByte family of System-On-a-Chip parts. They include
the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
and BCM1480 chips.
To compile this driver as a module, choose M here: the module
will be called sb1250-mac.
config TIGON3
tristate "Broadcom Tigon3 support"
depends on PCI
select PHYLIB
---help---
This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called tg3. This is recommended.
config BNX2X
tristate "Broadcom NetXtremeII 10Gb support"
depends on PCI
select FW_LOADER
select ZLIB_INFLATE
select LIBCRC32C
select MDIO
---help---
This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
To compile this driver as a module, choose M here: the module
will be called bnx2x. This is recommended.
endif # NET_VENDOR_BROADCOM
#
# Makefile for the Broadcom network device drivers.
#
obj-$(CONFIG_B44) += b44.o
obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
obj-$(CONFIG_BNX2) += bnx2.o
obj-$(CONFIG_CNIC) += cnic.o
obj-$(CONFIG_BNX2X) += bnx2x/
obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
obj-$(CONFIG_TIGON3) += tg3.o
...@@ -45,8 +45,8 @@ ...@@ -45,8 +45,8 @@
#include "bnx2x/bnx2x_reg.h" #include "bnx2x/bnx2x_reg.h"
#include "bnx2x/bnx2x_fw_defs.h" #include "bnx2x/bnx2x_fw_defs.h"
#include "bnx2x/bnx2x_hsi.h" #include "bnx2x/bnx2x_hsi.h"
#include "../scsi/bnx2i/57xx_iscsi_constants.h" #include "../../../scsi/bnx2i/57xx_iscsi_constants.h"
#include "../scsi/bnx2i/57xx_iscsi_hsi.h" #include "../../../scsi/bnx2i/57xx_iscsi_hsi.h"
#include "cnic.h" #include "cnic.h"
#include "cnic_defs.h" #include "cnic_defs.h"
......
...@@ -58,7 +58,7 @@ ...@@ -58,7 +58,7 @@
#include "57xx_hsi_bnx2fc.h" #include "57xx_hsi_bnx2fc.h"
#include "bnx2fc_debug.h" #include "bnx2fc_debug.h"
#include "../../net/cnic_if.h" #include "../../net/ethernet/broadcom/cnic_if.h"
#include "bnx2fc_constants.h" #include "bnx2fc_constants.h"
#define BNX2FC_NAME "bnx2fc" #define BNX2FC_NAME "bnx2fc"
......
...@@ -40,7 +40,7 @@ ...@@ -40,7 +40,7 @@
#include <scsi/libiscsi.h> #include <scsi/libiscsi.h>
#include <scsi/scsi_transport_iscsi.h> #include <scsi/scsi_transport_iscsi.h>
#include "../../net/cnic_if.h" #include "../../net/ethernet/broadcom/cnic_if.h"
#include "57xx_iscsi_hsi.h" #include "57xx_iscsi_hsi.h"
#include "57xx_iscsi_constants.h" #include "57xx_iscsi_constants.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment