emi26: use request_firmware()

Signed-off-by: David Woodhouse <dwmw2@infradead.org>

drivers/usb/misc/emi26.c

@@ -16,18 +16,8 @@
 #include <linux/init.h>
 #include <linux/usb.h>
 #include <linux/delay.h>
-
-#define MAX_INTEL_HEX_RECORD_LENGTH 16
-typedef struct _INTEL_HEX_RECORD
-{
-	__u32	length;
-	__u32	address;
-	__u32	type;
-	__u8	data[MAX_INTEL_HEX_RECORD_LENGTH];
-} INTEL_HEX_RECORD, *PINTEL_HEX_RECORD;
-
-/* include firmware (variables) */
-#include "emi26_fw.h"
+#include <linux/firmware.h>
+#include <linux/ihex.h>
 
 #define EMI26_VENDOR_ID 		0x086a  /* Emagic Soft-und Hardware GmBH */
 #define EMI26_PRODUCT_ID		0x0100	/* EMI 2|6 without firmware */
@@ -40,7 +30,9 @@ typedef struct _INTEL_HEX_RECORD
 #define CPUCS_REG		0x7F92  /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */ 
 #define INTERNAL_RAM(address)   (address <= MAX_INTERNAL_ADDRESS)
 
-static int emi26_writememory( struct usb_device *dev, int address, unsigned char *data, int length, __u8 bRequest);
+static int emi26_writememory( struct usb_device *dev, int address,
+			      const unsigned char *data, int length,
+			      __u8 bRequest);
 static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit);
 static int emi26_load_firmware (struct usb_device *dev);
 static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id);
@@ -50,7 +42,9 @@ static void __exit emi26_exit (void);
 
 
 /* thanks to drivers/usb/serial/keyspan_pda.c code */
-static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
+static int emi26_writememory (struct usb_device *dev, int address,
+			      const unsigned char *data, int length,
+			      __u8 request)
 {
 	int result;
 	unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
@@ -83,9 +77,12 @@ static int emi26_set_reset (struct usb_device *dev, unsigned char reset_bit)
 
 static int emi26_load_firmware (struct usb_device *dev)
 {
+	const struct firmware *loader_fw = NULL;
+	const struct firmware *bitstream_fw = NULL;
+	const struct firmware *firmware_fw = NULL;
+	const struct ihex_binrec *rec;
 	int err;
 	int i;
-	int pos = 0;	/* Position in hex record */
 	__u32 addr;	/* Address to write */
 	__u8 *buf;
 
@@ -96,6 +93,23 @@ static int emi26_load_firmware (struct usb_device *dev)
 		goto wraperr;
 	}
 
+	err = request_ihex_firmware(&loader_fw, "emi26/loader.fw", &dev->dev);
+	if (err)
+		goto nofw;
+
+	err = request_ihex_firmware(&bitstream_fw, "emi26/bitstream.fw",
+				    &dev->dev);
+	if (err)
+		goto nofw;
+
+	err = request_ihex_firmware(&firmware_fw, "emi26/firmware.fw",
+				    &dev->dev);
+	if (err) {
+	nofw:
+		err( "%s - request_firmware() failed", __func__);
+		goto wraperr;
+	}
+
 	/* Assert reset (stop the CPU in the EMI) */
 	err = emi26_set_reset(dev,1);
 	if (err < 0) {
@@ -103,13 +117,17 @@ static int emi26_load_firmware (struct usb_device *dev)
 		goto wraperr;
 	}
 
+	rec = (const struct ihex_binrec *)loader_fw->data;
 	/* 1. We need to put the loader for the FPGA into the EZ-USB */
-	for (i=0; g_Loader[i].type == 0; i++) {
-		err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL);
+	while (rec) {
+		err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+					rec->data, be16_to_cpu(rec->len),
+					ANCHOR_LOAD_INTERNAL);
 		if (err < 0) {
 			err("%s - error loading firmware: error = %d", __func__, err);
 			goto wraperr;
 		}
+		rec = ihex_next_binrec(rec);
 	}
 
 	/* De-assert reset (let the CPU run) */
@@ -123,15 +141,16 @@ static int emi26_load_firmware (struct usb_device *dev)
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
 	 * a single request. This is _much_ faster! */
+	rec = (const struct ihex_binrec *)bitstream_fw->data;
 	do {
 		i = 0;
-		addr = g_bitstream[pos].address;
+		addr = be32_to_cpu(rec->addr);
 
 		/* intel hex records are terminated with type 0 element */
-		while ((g_bitstream[pos].type == 0) && (i + g_bitstream[pos].length < FW_LOAD_SIZE)) {
-			memcpy(buf + i, g_bitstream[pos].data, g_bitstream[pos].length);
-			i += g_bitstream[pos].length;
-			pos++;
+		while (rec && (i + be16_to_cpu(rec->len) < FW_LOAD_SIZE)) {
+			memcpy(buf + i, rec->data, be16_to_cpu(rec->len));
+			i += be16_to_cpu(rec->len);
+			rec = ihex_next_binrec(rec);
 		}
 		err = emi26_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
 		if (err < 0) {
@@ -148,8 +167,11 @@ static int emi26_load_firmware (struct usb_device *dev)
 	}
 
 	/* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
-	for (i=0; g_Loader[i].type == 0; i++) {
-		err = emi26_writememory(dev, g_Loader[i].address, g_Loader[i].data, g_Loader[i].length, ANCHOR_LOAD_INTERNAL);
+	for (rec = (const struct ihex_binrec *)loader_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+					rec->data, be16_to_cpu(rec->len),
+					ANCHOR_LOAD_INTERNAL);
 		if (err < 0) {
 			err("%s - error loading firmware: error = %d", __func__, err);
 			goto wraperr;
@@ -165,9 +187,13 @@ static int emi26_load_firmware (struct usb_device *dev)
 	}
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
-	for (i=0; g_Firmware[i].type == 0; i++) {
-		if (!INTERNAL_RAM(g_Firmware[i].address)) {
-			err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_EXTERNAL);
+
+	for (rec = (const struct ihex_binrec *)firmware_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		if (!INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+			err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+						rec->data, be16_to_cpu(rec->len),
+						ANCHOR_LOAD_EXTERNAL);
 			if (err < 0) {
 				err("%s - error loading firmware: error = %d", __func__, err);
 				goto wraperr;
@@ -182,9 +208,12 @@ static int emi26_load_firmware (struct usb_device *dev)
 		goto wraperr;
 	}
 
-	for (i=0; g_Firmware[i].type == 0; i++) {
-		if (INTERNAL_RAM(g_Firmware[i].address)) {
-			err = emi26_writememory(dev, g_Firmware[i].address, g_Firmware[i].data, g_Firmware[i].length, ANCHOR_LOAD_INTERNAL);
+	for (rec = (const struct ihex_binrec *)firmware_fw->data;
+	     rec; rec = ihex_next_binrec(rec)) {
+		if (INTERNAL_RAM(be32_to_cpu(rec->addr))) {
+			err = emi26_writememory(dev, be32_to_cpu(rec->addr),
+						rec->data, be16_to_cpu(rec->len),
+						ANCHOR_LOAD_INTERNAL);
 			if (err < 0) {
 				err("%s - error loading firmware: error = %d", __func__, err);
 				goto wraperr;
@@ -205,6 +234,10 @@ static int emi26_load_firmware (struct usb_device *dev)
 	err = 1;
 
 wraperr:
+	release_firmware(loader_fw);
+	release_firmware(bitstream_fw);
+	release_firmware(firmware_fw);
+
 	kfree(buf);
 	return err;
 }
@@ -257,5 +290,8 @@ MODULE_AUTHOR("Tapio Laxström");
 MODULE_DESCRIPTION("Emagic EMI 2|6 firmware loader.");
 MODULE_LICENSE("GPL");
 
+MODULE_FIRMWARE("emi26/loader.fw");
+MODULE_FIRMWARE("emi26/bitstream.fw");
+MODULE_FIRMWARE("emi26/firmware.fw");
 /* vi:ai:syntax=c:sw=8:ts=8:tw=80
  */

firmware/Makefile

@@ -27,6 +27,8 @@ fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
 				     ess/maestro3_assp_minisrc.fw
 fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
 				   yamaha/ds1e_ctrl.fw
+fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
+				  emi26/bitstream.fw
 fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
 				   kaweth/new_code_fix.bin \
 				   kaweth/trigger_code_fix.bin

firmware/WHENCE

@@ -133,3 +133,37 @@ Licence: GPLv2+
 Compiled from original 8051 source into Intel HEX, used in our binary ihex form.
 
 --------------------------------------------------------------------------
+
+Driver: emi26 -- EMI 2|6 USB Audio interface
+
+File: emi26/bitstream.fw
+Info: VERSION=1.1.1.131 DATE=2001dec06
+
+File: emi26/firmware.fw
+Info: VERSION=1.0.2.916 DATE=12.02.2002
+
+File: emi26/loader.fw
+
+Converted from Intel HEX files, used in our binary representation of ihex.
+
+Original licence information:
+/*
+ * This firmware is for the Emagic EMI 2|6 Audio Interface
+ *
+ * The firmware contained herein is Copyright (c) 1999-2002 Emagic
+ * as an unpublished work. This notice does not imply unrestricted
+ * or public access to this firmware which is a trade secret of Emagic,
+ * and which may not be reproduced, used, sold or transferred to
+ * any third party without Emagic's written consent. All Rights Reserved.
+ *
+ * Permission is hereby granted for the distribution of this firmware
+ * image as part of a Linux or other Open Source operating system kernel
+ * in text or binary form as required.
+ *
+ * This firmware may not be modified and may only be used with the
+ * Emagic EMI 2|6 Audio Interface. Distribution and/or Modification of
+ * any driver which includes this firmware, in whole or in part,
+ * requires the inclusion of this statement.
+ */
+
+--------------------------------------------------------------------------

firmware/emi26/loader.HEX

+:0300000002031CDC
+:03004300020400B4
+:10010000907FE9E0245B6060240260030201BE90FE
+:100110007FEAE0750A00F50BA3E0FEE4EE420A90E8
+:100120007FEEE0751500F516A3E0FEE4EE4215E55E
+:1001300016451570030201BEE4907FC5F0907FB4B0
+:10014000E020E3F9907FC5E0F50C120277AF0C7E5A
+:1001500000EF250BF50BEE350AF50AC3E5169FF502
+:1001600016E5159EF51580C7907FEAE0750A00F543
+:100170000BA3E0FEE4EE420A907FEEE0751500F579
+:1001800016A3E0FEE4EE4215E51645156030E49056
+:100190007FC5F0907FB4E020E3F9907FC5E0F50CD7
+:1001A00012028FAF0C7E00EF250BF50BEE350AF532
+:0F01B0000AC3E5169FF516E5159EF51580CAC31F
+:0101BF00221D
+:1001C000C220D2E843D820907FAB74FFF0907FA983
+:1001D000F0907FAAF05391EF907F95E044C0F090AB
+:1001E0007F98E044C0F0907F9EE044C0F0E4907FB0
+:1001F00094F0907F9DE0440FF0907F97E054F0F0F2
+:10020000907FAFE04401F0907FAEE0440DF0D2AFBC
+:10021000907F97E054F0F020204275140075130091
+:100220007512007511007F487E927D007C00AB1432
+:10023000AA13A912A811C312049A50DB2020D87A5D
+:100240000079007800E5142401F514EA3513F5135C
+:10025000E93512F512E83511F51180CA3020FD128A
+:1002600001005007907FB4E04401F0907FB4E04477
+:0602700002F0C22080E64E
+:010276002265
+:10027700E50CFFE50BF582E50AF58375927E74C000
+:08028700F8E208F0A3DFFA22FF
+:10028F00907F96858392A8827902900000E0B40057
+:10029F00377401F0907F93E054FCF0907F96E05418
+:1002AF00FCF0907F9CE04403F0907F94E0547FF04B
+:1002BF00907F97E04480F0907F9DE04480F0907FA6
+:1002CF0097E0547FF04480F0E50CFF907EC0E0F59E
+:1002DF0028E4A24733F269F2E4A24633F269F2E46A
+:1002EF00A24533F269F2E4A24433F269F2E4A24385
+:1002FF0033F269F2E4A24233F269F2E4A24133F23B
+:0D030F0069F2E4A24033F269F2A3DFC222DA
+:0C031C00787FE4F6D8FD758129020363A8
+:100328000201C0E493A3F8E493A34003F68001F22A
+:1003380008DFF48029E493A3F85407240CC8C333D6
+:10034800C4540F4420C8834004F456800146F6DFA5
+:10035800E4800B0102040810204080900484E47EAD
+:10036800019360BCA3FF543F30E509541FFEE4939A
+:10037800A360010ECF54C025E060A840B8E493A361
+:10038800FAE493A3F8E493A3C8C582C8CAC583CA8C
+:10039800F0A3C8C582C8CAC583CADFE9DEE780BE44
+:1003A800C0E0C083C082907FC4E4F05391EF907F97
+:0B03B800AB7404F0D082D083D0E032A0
+:1003C300C0E0C083C082D2205391EF907FAB740111
+:0803D300F0D082D083D0E032AB
+:1003DB00C0E0C083C0825391EF907FAB7402F0D02A
+:0603EB0082D083D0E03255
+:0103F10032D9
+:0103F20032D8
+:0103F30032D7
+:0103F40032D6
+:0103F50032D5
+:0103F60032D4
+:0103F70032D3
+:0103F80032D2
+:0103F90032D1
+:0103FA0032D0
+:0103FB0032CF
+:0103FC0032CE
+:0103FD0032CD
+:0103FE0032CC
+:0103FF0032CB
+:100400000203C3000203DB000203A80002046E0023
+:10041000020458000203F1000203F2000203F30099
+:100420000203F4000203F5000203F6000203F700E2
+:100430000203F8000203F9000203FA000203FB00C2
+:100440000203FC000203FD000203FE000203FF00A2
+:080450000204AB000204AC0041
+:10045800C0E0C083C0825391EF907FAB7410F0D09E
+:0604680082D083D0E032D7
+:10046E00C0E0C083C0825391EF907FAB7408F0D090
+:06047E0082D083D0E032C1
+:10048400020A000F010C11040D00000000410000DD
+:010494000067
+:04049500021700004A
+:010499000062
+:10049A00EB9FF5F0EA9E42F0E99D42F0E89C45F0B8
+:0104AA00222F
+:0104AB00321E
+:0104AC00321D
+:1011000012011001000000406A0801010001010203
+:10111000000109022000010103A0000904000002EF
+:10112000FF0000040705820240000007050202409C
+:10113000000004030904260341006E0063006800F8
+:101140006F007200200043006800690070007300A7
+:101150002C00200049006E0063002E00280346008A
+:10116000690072006D007700610072006500200068
+:101170004600720061006D00650057006F0072004C
+:101180006B0073002A0343006F006E006600690065
+:101190006700750072006100740069006F006E00E6
+:1011A000200053007400720069006E006700220383
+:1011B00049006E0074006500720066006100630003
+:1011C0006500200053007400720069006E00670023
+:0211D00000001D
+:00000001FF
+/*
+ * This firmware is for the Emagic EMI 2|6 Audio Interface
+ *
+ * The firmware contained herein is Copyright (c) 1999-2002 Emagic
+ * as an unpublished work. This notice does not imply unrestricted
+ * or public access to this firmware which is a trade secret of Emagic,
+ * and which may not be reproduced, used, sold or transferred to
+ * any third party without Emagic's written consent. All Rights Reserved.
+ *
+ * This firmware may not be modified and may only be used with the
+ * Emagic EMI 2|6 Audio Interface. Distribution and/or Modification of
+ * any driver which includes this firmware, in whole or in part,
+ * requires the inclusion of this statement.
+ */