ice: Recognize 860 as iSCSI port in CEE mode

iSCSI can use both TCP ports 860 and 3260. However, in our current
implementation, the ice_aqc_opc_get_cee_dcb_cfg (0x0A07) AQ command
doesn't provide a way to communicate the protocol port number to the
AQ's caller. Thus, we assume that 3260 is the iSCSI port number at the
AQ's caller layer.

Rely on the dcbx-willing mode, desired QoS and remote QoS configuration to
determine which port number that iSCSI will use.

Fixes: 0ebd3ff1 ("ice: Add code for DCB initialization part 2/4")
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

drivers/net/ethernet/intel/ice/ice_dcb.c

@@ -738,22 +738,27 @@ ice_aq_get_cee_dcb_cfg(struct ice_hw *hw,
 /**
  * ice_cee_to_dcb_cfg
  * @cee_cfg: pointer to CEE configuration struct
- * @dcbcfg: DCB configuration struct
+ * @pi: port information structure
  *
  * Convert CEE configuration from firmware to DCB configuration
  */
 static void
 ice_cee_to_dcb_cfg(struct ice_aqc_get_cee_dcb_cfg_resp *cee_cfg,
-		   struct ice_dcbx_cfg *dcbcfg)
+		   struct ice_port_info *pi)
 {
 	u32 status, tlv_status = le32_to_cpu(cee_cfg->tlv_status);
 	u32 ice_aqc_cee_status_mask, ice_aqc_cee_status_shift;
+	u8 i, j, err, sync, oper, app_index, ice_app_sel_type;
 	u16 app_prio = le16_to_cpu(cee_cfg->oper_app_prio);
-	u8 i, err, sync, oper, app_index, ice_app_sel_type;
 	u16 ice_aqc_cee_app_mask, ice_aqc_cee_app_shift;
+	struct ice_dcbx_cfg *cmp_dcbcfg, *dcbcfg;
 	u16 ice_app_prot_id_type;
 
-	/* CEE PG data to ETS config */
+	dcbcfg = &pi->qos_cfg.local_dcbx_cfg;
+	dcbcfg->dcbx_mode = ICE_DCBX_MODE_CEE;
+	dcbcfg->tlv_status = tlv_status;
+
+	/* CEE PG data */
 	dcbcfg->etscfg.maxtcs = cee_cfg->oper_num_tc;
 
 	/* Note that the FW creates the oper_prio_tc nibbles reversed
@@ -780,10 +785,16 @@ ice_cee_to_dcb_cfg(struct ice_aqc_get_cee_dcb_cfg_resp *cee_cfg,
 		}
 	}
 
-	/* CEE PFC data to ETS config */
+	/* CEE PFC data */
 	dcbcfg->pfc.pfcena = cee_cfg->oper_pfc_en;
 	dcbcfg->pfc.pfccap = ICE_MAX_TRAFFIC_CLASS;
 
+	/* CEE APP TLV data */
+	if (dcbcfg->app_mode == ICE_DCBX_APPS_NON_WILLING)
+		cmp_dcbcfg = &pi->qos_cfg.desired_dcbx_cfg;
+	else
+		cmp_dcbcfg = &pi->qos_cfg.remote_dcbx_cfg;
+
 	app_index = 0;
 	for (i = 0; i < 3; i++) {
 		if (i == 0) {
@@ -802,6 +813,18 @@ ice_cee_to_dcb_cfg(struct ice_aqc_get_cee_dcb_cfg_resp *cee_cfg,
 			ice_aqc_cee_app_shift = ICE_AQC_CEE_APP_ISCSI_S;
 			ice_app_sel_type = ICE_APP_SEL_TCPIP;
 			ice_app_prot_id_type = ICE_APP_PROT_ID_ISCSI;
+
+			for (j = 0; j < cmp_dcbcfg->numapps; j++) {
+				u16 prot_id = cmp_dcbcfg->app[j].prot_id;
+				u8 sel = cmp_dcbcfg->app[j].selector;
+
+				if  (sel == ICE_APP_SEL_TCPIP &&
+				     (prot_id == ICE_APP_PROT_ID_ISCSI ||
+				      prot_id == ICE_APP_PROT_ID_ISCSI_860)) {
+					ice_app_prot_id_type = prot_id;
+					break;
+				}
+			}
 		} else {
 			/* FIP APP */
 			ice_aqc_cee_status_mask = ICE_AQC_CEE_FIP_STATUS_M;
@@ -892,11 +915,8 @@ enum ice_status ice_get_dcb_cfg(struct ice_port_info *pi)
 	ret = ice_aq_get_cee_dcb_cfg(pi->hw, &cee_cfg, NULL);
 	if (!ret) {
 		/* CEE mode */
-		dcbx_cfg = &pi->qos_cfg.local_dcbx_cfg;
-		dcbx_cfg->dcbx_mode = ICE_DCBX_MODE_CEE;
-		dcbx_cfg->tlv_status = le32_to_cpu(cee_cfg.tlv_status);
-		ice_cee_to_dcb_cfg(&cee_cfg, dcbx_cfg);
 		ret = ice_get_ieee_or_cee_dcb_cfg(pi, ICE_DCBX_MODE_CEE);
+		ice_cee_to_dcb_cfg(&cee_cfg, pi);
 	} else if (pi->hw->adminq.sq_last_status == ICE_AQ_RC_ENOENT) {
 		/* CEE mode not enabled try querying IEEE data */
 		dcbx_cfg = &pi->qos_cfg.local_dcbx_cfg;

drivers/net/ethernet/intel/ice/ice_type.h

@@ -535,6 +535,7 @@ struct ice_dcb_app_priority_table {
 #define ICE_TLV_STATUS_ERR	0x4
 #define ICE_APP_PROT_ID_FCOE	0x8906
 #define ICE_APP_PROT_ID_ISCSI	0x0cbc
+#define ICE_APP_PROT_ID_ISCSI_860 0x035c
 #define ICE_APP_PROT_ID_FIP	0x8914
 #define ICE_APP_SEL_ETHTYPE	0x1
 #define ICE_APP_SEL_TCPIP	0x2