Commit af0a5111 authored by Petr Machata's avatar Petr Machata Committed by David S. Miller

selftests: forwarding: Fix packet matching in mirroring selftests

In commit 6de6e46d ("cls_flower: Fix inability to match GRE/IPIP
packets"), cls_flower was fixed to match an outer packet of a tunneled
packet as would be expected, rather than dissecting to the inner packet and
matching on that.

This fix uncovered several issues in packet matching in mirroring
selftests:

- in mirror_gre_bridge_1d_vlan.sh and mirror_gre_vlan_bridge_1q.sh, the
  vlan_ethtype match is copied around as "ip", even as some of the tests
  are running over ip6gretap. This is fixed by using an "ipv6" for
  vlan_ethtype in the ip6gretap tests.

- in mirror_gre_changes.sh, a filter to count GRE packets is set up to
  match TTL of 50. This used to trigger in the offloaded datapath, where
  the envelope TTL was matched, but not in the software datapath, which
  considered TTL of the inner packet. Now that both match consistently, all
  the packets were double-counted. This is fixed by marking the filter as
  skip_hw, leaving only the SW datapath component active.

Fixes: 6de6e46d ("cls_flower: Fix inability to match GRE/IPIP packets")
Signed-off-by: default avatarPetr Machata <petrm@nvidia.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c7cd82b9
...@@ -80,7 +80,7 @@ test_gretap() ...@@ -80,7 +80,7 @@ test_gretap()
test_ip6gretap() test_ip6gretap()
{ {
test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ip' \ test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ipv6' \
"mirror to ip6gretap" "mirror to ip6gretap"
} }
......
...@@ -74,7 +74,7 @@ test_span_gre_ttl() ...@@ -74,7 +74,7 @@ test_span_gre_ttl()
mirror_install $swp1 ingress $tundev "matchall $tcflags" mirror_install $swp1 ingress $tundev "matchall $tcflags"
tc filter add dev $h3 ingress pref 77 prot $prot \ tc filter add dev $h3 ingress pref 77 prot $prot \
flower ip_ttl 50 action pass flower skip_hw ip_ttl 50 action pass
mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 0 mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 0
......
...@@ -141,7 +141,7 @@ test_gretap() ...@@ -141,7 +141,7 @@ test_gretap()
test_ip6gretap() test_ip6gretap()
{ {
test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ip' \ test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ipv6' \
"mirror to ip6gretap" "mirror to ip6gretap"
} }
...@@ -218,6 +218,7 @@ test_ip6gretap_forbidden_egress() ...@@ -218,6 +218,7 @@ test_ip6gretap_forbidden_egress()
test_span_gre_untagged_egress() test_span_gre_untagged_egress()
{ {
local tundev=$1; shift local tundev=$1; shift
local ul_proto=$1; shift
local what=$1; shift local what=$1; shift
RET=0 RET=0
...@@ -225,7 +226,7 @@ test_span_gre_untagged_egress() ...@@ -225,7 +226,7 @@ test_span_gre_untagged_egress()
mirror_install $swp1 ingress $tundev "matchall $tcflags" mirror_install $swp1 ingress $tundev "matchall $tcflags"
quick_test_span_gre_dir $tundev ingress quick_test_span_gre_dir $tundev ingress
quick_test_span_vlan_dir $h3 555 ingress quick_test_span_vlan_dir $h3 555 ingress "$ul_proto"
h3_addr_add_del del $h3.555 h3_addr_add_del del $h3.555
bridge vlan add dev $swp3 vid 555 pvid untagged bridge vlan add dev $swp3 vid 555 pvid untagged
...@@ -233,7 +234,7 @@ test_span_gre_untagged_egress() ...@@ -233,7 +234,7 @@ test_span_gre_untagged_egress()
sleep 5 sleep 5
quick_test_span_gre_dir $tundev ingress quick_test_span_gre_dir $tundev ingress
fail_test_span_vlan_dir $h3 555 ingress fail_test_span_vlan_dir $h3 555 ingress "$ul_proto"
h3_addr_add_del del $h3 h3_addr_add_del del $h3
bridge vlan add dev $swp3 vid 555 bridge vlan add dev $swp3 vid 555
...@@ -241,7 +242,7 @@ test_span_gre_untagged_egress() ...@@ -241,7 +242,7 @@ test_span_gre_untagged_egress()
sleep 5 sleep 5
quick_test_span_gre_dir $tundev ingress quick_test_span_gre_dir $tundev ingress
quick_test_span_vlan_dir $h3 555 ingress quick_test_span_vlan_dir $h3 555 ingress "$ul_proto"
mirror_uninstall $swp1 ingress mirror_uninstall $swp1 ingress
...@@ -250,12 +251,12 @@ test_span_gre_untagged_egress() ...@@ -250,12 +251,12 @@ test_span_gre_untagged_egress()
test_gretap_untagged_egress() test_gretap_untagged_egress()
{ {
test_span_gre_untagged_egress gt4 "mirror to gretap" test_span_gre_untagged_egress gt4 ip "mirror to gretap"
} }
test_ip6gretap_untagged_egress() test_ip6gretap_untagged_egress()
{ {
test_span_gre_untagged_egress gt6 "mirror to ip6gretap" test_span_gre_untagged_egress gt6 ipv6 "mirror to ip6gretap"
} }
test_span_gre_fdb_roaming() test_span_gre_fdb_roaming()
......
...@@ -115,13 +115,14 @@ do_test_span_vlan_dir_ips() ...@@ -115,13 +115,14 @@ do_test_span_vlan_dir_ips()
local dev=$1; shift local dev=$1; shift
local vid=$1; shift local vid=$1; shift
local direction=$1; shift local direction=$1; shift
local ul_proto=$1; shift
local ip1=$1; shift local ip1=$1; shift
local ip2=$1; shift local ip2=$1; shift
# Install the capture as skip_hw to avoid double-counting of packets. # Install the capture as skip_hw to avoid double-counting of packets.
# The traffic is meant for local box anyway, so will be trapped to # The traffic is meant for local box anyway, so will be trapped to
# kernel. # kernel.
vlan_capture_install $dev "skip_hw vlan_id $vid vlan_ethtype ip" vlan_capture_install $dev "skip_hw vlan_id $vid vlan_ethtype $ul_proto"
mirror_test v$h1 $ip1 $ip2 $dev 100 $expect mirror_test v$h1 $ip1 $ip2 $dev 100 $expect
mirror_test v$h2 $ip2 $ip1 $dev 100 $expect mirror_test v$h2 $ip2 $ip1 $dev 100 $expect
vlan_capture_uninstall $dev vlan_capture_uninstall $dev
......
...@@ -85,9 +85,9 @@ test_tagged_vlan_dir() ...@@ -85,9 +85,9 @@ test_tagged_vlan_dir()
RET=0 RET=0
mirror_install $swp1 $direction $swp3.555 "matchall $tcflags" mirror_install $swp1 $direction $swp3.555 "matchall $tcflags"
do_test_span_vlan_dir_ips 10 "$h3.555" 111 "$direction" \ do_test_span_vlan_dir_ips 10 "$h3.555" 111 "$direction" ip \
192.0.2.17 192.0.2.18 192.0.2.17 192.0.2.18
do_test_span_vlan_dir_ips 0 "$h3.555" 555 "$direction" \ do_test_span_vlan_dir_ips 0 "$h3.555" 555 "$direction" ip \
192.0.2.17 192.0.2.18 192.0.2.17 192.0.2.18
mirror_uninstall $swp1 $direction mirror_uninstall $swp1 $direction
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment