[media] dib0700: NEC scancode cleanup

the RC RX packet is defined as:

        struct dib0700_rc_response {
		...
                                u8 not_system;
                                u8 system;
		...
                u8 data;
                u8 not_data;

The NEC protocol transmits in the order:
        system
        not_system
        data
        not_data

Note that the code defines the NEC extended scancode as:

        scancode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data;

i.e.

        scancode = poll_reply->not_system << 16 |
                   poll_reply->system     << 8  |
                   poll_reply->data;

Which, if the order *is* reversed, would mean that the scancode that
gets defined is in reality:

        scancode = poll_reply->system     << 16 |
                   poll_reply->not_system << 8  |
                   poll_reply->data;

Which is the same as the order used in drivers/media/rc/ir-nec-decoder.c.

This patch changes the code to match my assumption (the generated scancode
should, however, not change).

[m.chehab@samsung.com: rebased and fixed the decoding error message]
Signed-off-by: David Härdeman <david@hardeman.nu>
CC: Patrick Boettcher <pboettcher@kernellabs.com>
Tested-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/usb/dvb-usb/dib0700_core.c

@@ -658,13 +658,8 @@ int dib0700_change_protocol(struct rc_dev *rc, u64 *rc_type)
 struct dib0700_rc_response {
 	u8 report_id;
 	u8 data_state;
-	union {
-		u16 system16;
-		struct {
-			u8 not_system;
-			u8 system;
-		};
-	};
+	u8 system;
+	u8 not_system;
 	u8 data;
 	u8 not_data;
 };
@@ -710,20 +705,29 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		toggle = 0;
 
 		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((poll_reply->system == 0x00) && (poll_reply->data == 0x00)
-		    && (poll_reply->not_data == 0xff)) {
+		if (poll_reply->system     == 0x00 &&
+		    poll_reply->not_system == 0x00 &&
+		    poll_reply->data       == 0x00 &&
+		    poll_reply->not_data   == 0xff) {
 			poll_reply->data_state = 2;
 			break;
 		}
 
-		if ((poll_reply->system ^ poll_reply->not_system) != 0xff) {
+		if ((poll_reply->data ^ poll_reply->not_data) != 0xff) {
+			deb_data("NEC32 protocol\n");
+			keycode = RC_SCANCODE_NEC32(poll_reply->system     << 24 |
+						     poll_reply->not_system << 16 |
+						     poll_reply->data       << 8  |
+						     poll_reply->not_data);
+		} else if ((poll_reply->system ^ poll_reply->not_system) != 0xff) {
 			deb_data("NEC extended protocol\n");
-			/* NEC extended code - 24 bits */
-			keycode = be16_to_cpu(poll_reply->system16) << 8 | poll_reply->data;
+			keycode = RC_SCANCODE_NECX(poll_reply->system << 8 |
+						    poll_reply->not_system,
+						    poll_reply->data);
 		} else {
 			deb_data("NEC normal protocol\n");
-			/* normal NEC code - 16 bits */
-			keycode = poll_reply->system << 8 | poll_reply->data;
+			keycode = RC_SCANCODE_NEC(poll_reply->system,
+						   poll_reply->data);
 		}
 
 		break;
@@ -738,8 +742,8 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 
 	if ((poll_reply->data + poll_reply->not_data) != 0xff) {
 		/* Key failed integrity check */
-		err("key failed integrity check: %04x %02x %02x",
-		    poll_reply->system,
+		err("key failed integrity check: %02x %02x %02x %02x",
+		    poll_reply->system,  poll_reply->not_system,
 		    poll_reply->data, poll_reply->not_data);
 		goto resubmit;
 	}