mmc: sdhci-esdhc-imx: add SD clock limitation for imx6ull

i.MX6ULL has errata ERR010450, point out that due to SOC I/O
timing limitation, for eMMC HS200 and SD/SDIO 3.0 SDR104, the
clock rate can't exceed 150MHz. And for eMMC DDR52 and SD/SDIO
DDR50 mode, the clock rate can't exceed 45MHz.

This patch add this limit for imx6ull.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
[Ulf: Fixed comments and whitespace]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/sdhci-esdhc-imx.c

@@ -138,7 +138,12 @@
 #define ESDHC_FLAG_HS200		BIT(8)
 /* The IP supports HS400 mode */
 #define ESDHC_FLAG_HS400		BIT(9)
-
+/*
+ * The IP has errata ERR010450
+ * uSDHC: Due to the I/O timing limit, for SDR mode, SD card clock can't
+ * exceed 150MHz, for DDR mode, SD card clock can't exceed 45MHz.
+ */
+#define ESDHC_FLAG_ERR010450		BIT(10)
 /* A clock frequency higher than this rate requires strobe dll control */
 #define ESDHC_STROBE_DLL_CLK_FREQ	100000000
 
@@ -177,6 +182,12 @@ static const struct esdhc_soc_data usdhc_imx6sx_data = {
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200,
 };
 
+static const struct esdhc_soc_data usdhc_imx6ull_data = {
+	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
+			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
+			| ESDHC_FLAG_ERR010450,
+};
+
 static const struct esdhc_soc_data usdhc_imx7d_data = {
 	.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
 			| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
@@ -227,6 +238,7 @@ static const struct of_device_id imx_esdhc_dt_ids[] = {
 	{ .compatible = "fsl,imx6sx-usdhc", .data = &usdhc_imx6sx_data, },
 	{ .compatible = "fsl,imx6sl-usdhc", .data = &usdhc_imx6sl_data, },
 	{ .compatible = "fsl,imx6q-usdhc", .data = &usdhc_imx6q_data, },
+	{ .compatible = "fsl,imx6ull-usdhc", .data = &usdhc_imx6ull_data, },
 	{ .compatible = "fsl,imx7d-usdhc", .data = &usdhc_imx7d_data, },
 	{ /* sentinel */ }
 };
@@ -733,6 +745,14 @@ static inline void esdhc_pltfm_set_clock(struct sdhci_host *host,
 		| ESDHC_CLOCK_MASK);
 	sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 
+	if (imx_data->socdata->flags & ESDHC_FLAG_ERR010450) {
+		unsigned int max_clock;
+
+		max_clock = imx_data->is_ddr ? 45000000 : 150000000;
+
+		clock = min(clock, max_clock);
+	}
+
 	while (host_clock / (16 * pre_div * ddr_pre_div) > clock &&
 			pre_div < 256)
 		pre_div *= 2;