Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd

Pull MTD updates from Brian Norris:
 "NAND:

    Quoting Boris:
     'This pull request contains only one notable change:
       - Addition of the MTK NAND controller driver

      And a bunch of specific NAND driver improvements/fixes. Here are the
      changes that are worth mentioning:
       - A few fixes/improvements for the xway NAND controller driver
       - A few fixes for the sunxi NAND controller driver
       - Support for DMA in the sunxi NAND driver
       - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs
       - Addition for bitflips detection in erased pages to the brcmnand driver
       - Support for new brcmnand IPs
       - Update of the OMAP-GPMC binding to support DMA channel description'

    In addition, some small fixes around error handling, etc., as well
    as one long-standing corner case issue (2.6.20, I think?) with
    writing 1 byte less than a page.

  NOR:

   - rework some error handling on reads and writes, so we can better
     handle (for instance) SPI controllers which have limitations on
     their maximum transfer size

   - add new Cadence Quad SPI flash controller driver

   - add new Atmel QSPI flash controller driver

   - add new Hisilicon SPI flash controller driver

   - support a few new flash, and update supported features on others

   - fix the logic used for detecting a fully-unlocked flash

  And other miscellaneous small fixes"

* tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits)
  mtd: spi-nor: don't build Cadence QuadSPI on non-ARM
  mtd: mtk-nor: remove duplicated include from mtk-quadspi.c
  mtd: nand: fix bug writing 1 byte less than page size
  mtd: update description of MTD_BCM47XXSFLASH symbol
  mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller
  mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver
  mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd
  mtd: pmcmsp-flash: Allocating too much in init_msp_flash()
  mtd: maps: sa1100-flash: potential NULL dereference
  mtd: atmel-quadspi: add driver for Atmel QSPI controller
  mtd: nand: omap2: fix return value check in omap_nand_probe()
  Documentation: atmel-quadspi: add binding file for Atmel QSPI driver
  mtd: spi-nor: add hisilicon spi-nor flash controller driver
  mtd: spi-nor: support dual, quad, and WP for Gigadevice
  mtd: spi-nor: Added support for n25q00a.
  memory: Update dependency of IFC for Layerscape
  mtd: nand: jz4780: Update MODULE_AUTHOR email address
  mtd: nand: sunxi: prevent a small memory leak
  mtd: nand: sunxi: add reset line support
  mtd: nand: sunxi: update DT bindings
  ...

Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt

@@ -46,6 +46,10 @@ Required properties:
 			0 maps to GPMC_WAIT0 pin.
  - gpio-cells:		Must be set to 2
 
+Required properties when using NAND prefetch dma:
+ - dmas			GPMC NAND prefetch dma channel
+ - dma-names		Must be set to "rxtx"
+
 Timing properties for child nodes. All are optional and default to 0.
 
  - gpmc,sync-clk-ps:	Minimum clock period for synchronous mode, in picoseconds
@@ -137,7 +141,8 @@ Example for an AM33xx board:
 		ti,hwmods = "gpmc";
 		reg = <0x50000000 0x2000>;
 		interrupts = <100>;
-
+		dmas = <&edma 52 0>;
+		dma-names = "rxtx";
 		gpmc,num-cs = <8>;
 		gpmc,num-waitpins = <2>;
 		#address-cells = <2>;

Documentation/devicetree/bindings/mtd/atmel-quadspi.txt

+* Atmel Quad Serial Peripheral Interface (QSPI)
+
+Required properties:
+- compatible:     Should be "atmel,sama5d2-qspi".
+- reg:            Should contain the locations and lengths of the base registers
+                  and the mapped memory.
+- reg-names:      Should contain the resource reg names:
+                  - qspi_base: configuration register address space
+                  - qspi_mmap: memory mapped address space
+- interrupts:     Should contain the interrupt for the device.
+- clocks:         The phandle of the clock needed by the QSPI controller.
+- #address-cells: Should be <1>.
+- #size-cells:    Should be <0>.
+
+Example:
+
+spi@f0020000 {
+	compatible = "atmel,sama5d2-qspi";
+	reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
+	reg-names = "qspi_base", "qspi_mmap";
+	interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+	clocks = <&spi0_clk>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0_default>;
+	status = "okay";
+
+	m25p80@0 {
+		...
+	};
+};

Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt

@@ -27,6 +27,7 @@ Required properties:
                          brcm,brcmnand-v6.2
                          brcm,brcmnand-v7.0
                          brcm,brcmnand-v7.1
+                         brcm,brcmnand-v7.2
                          brcm,brcmnand
 - reg              : the register start and length for NAND register region.
                      (optional) Flash DMA register range (if present)

Documentation/devicetree/bindings/mtd/cadence-quadspi.txt

+* Cadence Quad SPI controller
+
+Required properties:
+- compatible : Should be "cdns,qspi-nor".
+- reg : Contains two entries, each of which is a tuple consisting of a
+	physical address and length. The first entry is the address and
+	length of the controller register set. The second entry is the
+	address and length of the QSPI Controller data area.
+- interrupts : Unit interrupt specifier for the controller interrupt.
+- clocks : phandle to the Quad SPI clock.
+- cdns,fifo-depth : Size of the data FIFO in words.
+- cdns,fifo-width : Bus width of the data FIFO in bytes.
+- cdns,trigger-address : 32-bit indirect AHB trigger address.
+
+Optional properties:
+- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not.
+
+Optional subnodes:
+Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional
+custom properties:
+- cdns,read-delay : Delay for read capture logic, in clock cycles
+- cdns,tshsl-ns : Delay in nanoseconds for the length that the master
+                  mode chip select outputs are de-asserted between
+		  transactions.
+- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being
+                  de-activated and the activation of another.
+- cdns,tchsh-ns : Delay in nanoseconds between last bit of current
+                  transaction and deasserting the device chip select
+		  (qspi_n_ss_out).
+- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low
+                  and first bit transfer.
+
+Example:
+
+	qspi: spi@ff705000 {
+		compatible = "cdns,qspi-nor";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xff705000 0x1000>,
+		      <0xffa00000 0x1000>;
+		interrupts = <0 151 4>;
+		clocks = <&qspi_clk>;
+		cdns,is-decoded-cs;
+		cdns,fifo-depth = <128>;
+		cdns,fifo-width = <4>;
+		cdns,trigger-address = <0x00000000>;
+
+		flash0: n25q00@0 {
+			...
+			cdns,read-delay = <4>;
+			cdns,tshsl-ns = <50>;
+			cdns,tsd2d-ns = <50>;
+			cdns,tchsh-ns = <4>;
+			cdns,tslch-ns = <4>;
+		};
+	};

Documentation/devicetree/bindings/mtd/gpmc-nand.txt

@@ -39,7 +39,7 @@ Optional properties:
 
 		"prefetch-polled"	Prefetch polled mode (default)
 		"polled"		Polled mode, without prefetch
-		"prefetch-dma"		Prefetch enabled sDMA mode
+		"prefetch-dma"		Prefetch enabled DMA mode
 		"prefetch-irq"		Prefetch enabled irq mode
 
  - elm_id:	<deprecated> use "ti,elm-id" instead

Documentation/devicetree/bindings/mtd/hisilicon,fmc-spi-nor.txt

+HiSilicon SPI-NOR Flash Controller
+
+Required properties:
+- compatible : Should be "hisilicon,fmc-spi-nor" and one of the following strings:
+		"hisilicon,hi3519-spi-nor"
+- address-cells : Should be 1.
+- size-cells : Should be 0.
+- reg : Offset and length of the register set for the controller device.
+- reg-names : Must include the following two entries: "control", "memory".
+- clocks : handle to spi-nor flash controller clock.
+
+Example:
+spi-nor-controller@10000000 {
+	compatible = "hisilicon,hi3519-spi-nor", "hisilicon,fmc-spi-nor";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x10000000 0x1000>, <0x14000000 0x1000000>;
+	reg-names = "control", "memory";
+	clocks = <&clock HI3519_FMC_CLK>;
+	spi-nor@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+	};
+};

Documentation/devicetree/bindings/mtd/mtk-nand.txt

+MTK SoCs NAND FLASH controller (NFC) DT binding
+
+This file documents the device tree bindings for MTK SoCs NAND controllers.
+The functional split of the controller requires two drivers to operate:
+the nand controller interface driver and the ECC engine driver.
+
+The hardware description for both devices must be captured as device
+tree nodes.
+
+1) NFC NAND Controller Interface (NFI):
+=======================================
+
+The first part of NFC is NAND Controller Interface (NFI) HW.
+Required NFI properties:
+- compatible:			Should be "mediatek,mtxxxx-nfc".
+- reg:				Base physical address and size of NFI.
+- interrupts:			Interrupts of NFI.
+- clocks:			NFI required clocks.
+- clock-names:			NFI clocks internal name.
+- status:			Disabled default. Then set "okay" by platform.
+- ecc-engine:			Required ECC Engine node.
+- #address-cells:		NAND chip index, should be 1.
+- #size-cells:			Should be 0.
+
+Example:
+
+	nandc: nfi@1100d000 {
+		compatible = "mediatek,mt2701-nfc";
+		reg = <0 0x1100d000 0 0x1000>;
+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI>,
+			 <&pericfg CLK_PERI_NFI_PAD>;
+		clock-names = "nfi_clk", "pad_clk";
+		status = "disabled";
+		ecc-engine = <&bch>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+        };
+
+Platform related properties, should be set in {platform_name}.dts:
+- children nodes:	NAND chips.
+
+Children nodes properties:
+- reg:			Chip Select Signal, default 0.
+			Set as reg = <0>, <1> when need 2 CS.
+Optional:
+- nand-on-flash-bbt:	Store BBT on NAND Flash.
+- nand-ecc-mode:	the NAND ecc mode (check driver for supported modes)
+- nand-ecc-step-size:	Number of data bytes covered by a single ECC step.
+			valid values: 512 and 1024.
+			1024 is recommended for large page NANDs.
+- nand-ecc-strength:	Number of bits to correct per ECC step.
+			The valid values that the controller supports are: 4, 6,
+			8, 10, 12, 14, 16, 18, 20, 22, 24, 28, 32, 36, 40, 44,
+			48, 52, 56, 60.
+			The strength should be calculated as follows:
+			E = (S - F) * 8 / 14
+			S = O / (P / Q)
+				E :	nand-ecc-strength.
+				S :	spare size per sector.
+				F :	FDM size, should be in the range [1,8].
+					It is used to store free oob data.
+				O :	oob size.
+				P :	page size.
+				Q :	nand-ecc-step-size.
+			If the result does not match any one of the listed
+			choices above, please select the smaller valid value from
+			the list.
+			(otherwise the driver will do the adjustment at runtime)
+- pinctrl-names:	Default NAND pin GPIO setting name.
+- pinctrl-0:		GPIO setting node.
+
+Example:
+	&pio {
+		nand_pins_default: nanddefault {
+			pins_dat {
+				pinmux = <MT2701_PIN_111_MSDC0_DAT7__FUNC_NLD7>,
+					 <MT2701_PIN_112_MSDC0_DAT6__FUNC_NLD6>,
+					 <MT2701_PIN_114_MSDC0_DAT4__FUNC_NLD4>,
+					 <MT2701_PIN_118_MSDC0_DAT3__FUNC_NLD3>,
+					 <MT2701_PIN_121_MSDC0_DAT0__FUNC_NLD0>,
+					 <MT2701_PIN_120_MSDC0_DAT1__FUNC_NLD1>,
+					 <MT2701_PIN_113_MSDC0_DAT5__FUNC_NLD5>,
+					 <MT2701_PIN_115_MSDC0_RSTB__FUNC_NLD8>,
+					 <MT2701_PIN_119_MSDC0_DAT2__FUNC_NLD2>;
+				input-enable;
+				drive-strength = <MTK_DRIVE_8mA>;
+				bias-pull-up;
+			};
+
+			pins_we {
+				pinmux = <MT2701_PIN_117_MSDC0_CLK__FUNC_NWEB>;
+				drive-strength = <MTK_DRIVE_8mA>;
+				bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+			};
+
+			pins_ale {
+				pinmux = <MT2701_PIN_116_MSDC0_CMD__FUNC_NALE>;
+				drive-strength = <MTK_DRIVE_8mA>;
+				bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+			};
+		};
+	};
+
+	&nandc {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&nand_pins_default>;
+		nand@0 {
+			reg = <0>;
+			nand-on-flash-bbt;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <24>;
+			nand-ecc-step-size = <1024>;
+		};
+	};
+
+NAND chip optional subnodes:
+- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
+
+Example:
+	nand@0 {
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			preloader@0 {
+				label = "pl";
+				read-only;
+				reg = <0x00000000 0x00400000>;
+			};
+			android@0x00400000 {
+				label = "android";
+				reg = <0x00400000 0x12c00000>;
+			};
+		};
+	};
+
+2) ECC Engine:
+==============
+
+Required BCH properties:
+- compatible:	Should be "mediatek,mtxxxx-ecc".
+- reg:		Base physical address and size of ECC.
+- interrupts:	Interrupts of ECC.
+- clocks:	ECC required clocks.
+- clock-names:	ECC clocks internal name.
+- status:	Disabled default. Then set "okay" by platform.
+
+Example:
+
+	bch: ecc@1100e000 {
+		compatible = "mediatek,mt2701-ecc";
+		reg = <0 0x1100e000 0 0x1000>;
+		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&pericfg CLK_PERI_NFI_ECC>;
+		clock-names = "nfiecc_clk";
+		status = "disabled";
+	};

Documentation/devicetree/bindings/mtd/sunxi-nand.txt

@@ -11,10 +11,16 @@ Required properties:
     * "ahb" : AHB gating clock
     * "mod" : nand controller clock
 
+Optional properties:
+- dmas : shall reference DMA channel associated to the NAND controller.
+- dma-names : shall be "rxtx".
+
 Optional children nodes:
 Children nodes represent the available nand chips.
 
 Optional properties:
+- reset : phandle + reset specifier pair
+- reset-names : must contain "ahb"
 - allwinner,rb : shall contain the native Ready/Busy ids.
  or
 - rb-gpios : shall contain the gpios used as R/B pins.

arch/cris/arch-v10/drivers/axisflashmap.c

@@ -397,7 +397,7 @@ static int __init init_axis_flash(void)
 	if (!romfs_in_flash) {
 		/* Create an RAM device for the root partition (romfs). */
 
-#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0)
 		/* No use trying to boot this kernel from RAM. Panic! */
 		printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
 		       "device due to kernel (mis)configuration!\n");

arch/cris/arch-v32/drivers/axisflashmap.c

@@ -320,7 +320,7 @@ static int __init init_axis_flash(void)
 	 * but its size must be configured as 0 so as not to conflict
 	 * with our usage.
 	 */
-#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0) || (CONFIG_MTDRAM_ABS_POS != 0)
+#if !defined(CONFIG_MTD_MTDRAM) || (CONFIG_MTDRAM_TOTAL_SIZE != 0)
 	if (!romfs_in_flash && !nand_boot) {
 		printk(KERN_EMERG "axisflashmap: Cannot create an MTD RAM "
 		       "device; configure CONFIG_MTD_MTDRAM with size = 0!\n");

drivers/memory/Kconfig

@@ -115,7 +115,7 @@ config FSL_CORENET_CF
 
 config FSL_IFC
 	bool
-	depends on FSL_SOC
+	depends on FSL_SOC || ARCH_LAYERSCAPE
 
 config JZ4780_NEMC
 	bool "Ingenic JZ4780 SoC NEMC driver"

drivers/memory/fsl_ifc.c

@@ -31,7 +31,9 @@
 #include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/fsl_ifc.h>
-#include <asm/prom.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 
 struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
 EXPORT_SYMBOL(fsl_ifc_ctrl_dev);

drivers/mtd/chips/cfi_cmdset_0020.c

@@ -416,7 +416,7 @@ static int cfi_staa_read (struct mtd_info *mtd, loff_t from, size_t len, size_t
 	return ret;
 }
 
-static inline int do_write_buffer(struct map_info *map, struct flchip *chip,
+static int do_write_buffer(struct map_info *map, struct flchip *chip,
 				  unsigned long adr, const u_char *buf, int len)
 {
 	struct cfi_private *cfi = map->fldrv_priv;

drivers/mtd/devices/Kconfig

@@ -113,12 +113,12 @@ config MTD_SST25L
 	  if you want to specify device partitioning.
 
 config MTD_BCM47XXSFLASH
-	tristate "R/O support for serial flash on BCMA bus"
+	tristate "Support for serial flash on BCMA bus"
 	depends on BCMA_SFLASH && (MIPS || ARM)
 	help
 	  BCMA bus can have various flash memories attached, they are
 	  registered by bcma as platform devices. This enables driver for
-	  serial flash memories (only read-only mode is implemented).
+	  serial flash memories.
 
 config MTD_SLRAM
 	tristate "Uncached system RAM"
@@ -171,18 +171,6 @@ config MTDRAM_ERASE_SIZE
 	  as a module, it is also possible to specify this as a parameter when
 	  loading the module.
 
-#If not a module (I don't want to test it as a module)
-config MTDRAM_ABS_POS
-	hex "SRAM Hexadecimal Absolute position or 0"
-	depends on MTD_MTDRAM=y
-	default "0"
-	help
-	  If you have system RAM accessible by the CPU but not used by Linux
-	  in normal operation, you can give the physical address at which the
-	  available RAM starts, and the MTDRAM driver will use it instead of
-	  allocating space from Linux's available memory. Otherwise, leave
-	  this set to zero. Most people will want to leave this as zero.
-
 config MTD_BLOCK2MTD
 	tristate "MTD using block device"
 	depends on BLOCK

drivers/mtd/devices/m25p80.c

@@ -73,14 +73,15 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 	return spi_write(spi, flash->command, len + 1);
 }
 
-static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
-			size_t *retlen, const u_char *buf)
+static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
+			    const u_char *buf)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_device *spi = flash->spi;
 	struct spi_transfer t[2] = {};
 	struct spi_message m;
 	int cmd_sz = m25p_cmdsz(nor);
+	ssize_t ret;
 
 	spi_message_init(&m);
 
@@ -98,9 +99,14 @@ static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
 	t[1].len = len;
 	spi_message_add_tail(&t[1], &m);
 
-	spi_sync(spi, &m);
+	ret = spi_sync(spi, &m);
+	if (ret)
+		return ret;
 
-	*retlen += m.actual_length - cmd_sz;
+	ret = m.actual_length - cmd_sz;
+	if (ret < 0)
+		return -EIO;
+	return ret;
 }
 
 static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
@@ -119,21 +125,21 @@ static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor)
  * Read an address range from the nor chip.  The address range
  * may be any size provided it is within the physical boundaries.
  */
-static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-			size_t *retlen, u_char *buf)
+static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
+			   u_char *buf)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_device *spi = flash->spi;
 	struct spi_transfer t[2];
 	struct spi_message m;
 	unsigned int dummy = nor->read_dummy;
+	ssize_t ret;
 
 	/* convert the dummy cycles to the number of bytes */
 	dummy /= 8;
 
 	if (spi_flash_read_supported(spi)) {
 		struct spi_flash_read_message msg;
-		int ret;
 
 		memset(&msg, 0, sizeof(msg));
 
@@ -149,8 +155,9 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 		msg.data_nbits = m25p80_rx_nbits(nor);
 
 		ret = spi_flash_read(spi, &msg);
-		*retlen = msg.retlen;
-		return ret;
+		if (ret < 0)
+			return ret;
+		return msg.retlen;
 	}
 
 	spi_message_init(&m);
@@ -165,13 +172,17 @@ static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 
 	t[1].rx_buf = buf;
 	t[1].rx_nbits = m25p80_rx_nbits(nor);
-	t[1].len = len;
+	t[1].len = min(len, spi_max_transfer_size(spi));
 	spi_message_add_tail(&t[1], &m);
 
-	spi_sync(spi, &m);
+	ret = spi_sync(spi, &m);
+	if (ret)
+		return ret;
 
-	*retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
-	return 0;
+	ret = m.actual_length - m25p_cmdsz(nor) - dummy;
+	if (ret < 0)
+		return -EIO;
+	return ret;
 }
 
 /*

drivers/mtd/maps/physmap_of.c

@@ -186,7 +186,7 @@ static int of_flash_probe(struct platform_device *dev)
 	 * consists internally of 2 non-identical NOR chips on one die.
 	 */
 	p = of_get_property(dp, "reg", &count);
-	if (count % reg_tuple_size != 0) {
+	if (!p || count % reg_tuple_size != 0) {
 		dev_err(&dev->dev, "Malformed reg property on %s\n",
 				dev->dev.of_node->full_name);
 		err = -EINVAL;

drivers/mtd/maps/pmcmsp-flash.c

@@ -75,15 +75,15 @@ static int __init init_msp_flash(void)
 
 	printk(KERN_NOTICE "Found %d PMC flash devices\n", fcnt);
 
-	msp_flash = kmalloc(fcnt * sizeof(struct map_info *), GFP_KERNEL);
+	msp_flash = kcalloc(fcnt, sizeof(*msp_flash), GFP_KERNEL);
 	if (!msp_flash)
 		return -ENOMEM;
 
-	msp_parts = kmalloc(fcnt * sizeof(struct mtd_partition *), GFP_KERNEL);
+	msp_parts = kcalloc(fcnt, sizeof(*msp_parts), GFP_KERNEL);
 	if (!msp_parts)
 		goto free_msp_flash;
 
-	msp_maps = kcalloc(fcnt, sizeof(struct mtd_info), GFP_KERNEL);
+	msp_maps = kcalloc(fcnt, sizeof(*msp_maps), GFP_KERNEL);
 	if (!msp_maps)
 		goto free_msp_parts;
 

drivers/mtd/maps/sa1100-flash.c

@@ -230,8 +230,10 @@ static struct sa_info *sa1100_setup_mtd(struct platform_device *pdev,
 
 		info->mtd = mtd_concat_create(cdev, info->num_subdev,
 					      plat->name);
-		if (info->mtd == NULL)
+		if (info->mtd == NULL) {
 			ret = -ENXIO;
+			goto err;
+		}
 	}
 	info->mtd->dev.parent = &pdev->dev;
 

drivers/mtd/nand/Kconfig

@@ -438,7 +438,7 @@ config MTD_NAND_FSL_ELBC
 
 config MTD_NAND_FSL_IFC
 	tristate "NAND support for Freescale IFC controller"
-	depends on MTD_NAND && FSL_SOC
+	depends on MTD_NAND && (FSL_SOC || ARCH_LAYERSCAPE)
 	select FSL_IFC
 	select MEMORY
 	help
@@ -539,7 +539,6 @@ config MTD_NAND_FSMC
 config MTD_NAND_XWAY
 	tristate "Support for NAND on Lantiq XWAY SoC"
 	depends on LANTIQ && SOC_TYPE_XWAY
-	select MTD_NAND_PLATFORM
 	help
 	  Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
 	  to the External Bus Unit (EBU).
@@ -563,4 +562,11 @@ config MTD_NAND_QCOM
 	  Enables support for NAND flash chips on SoCs containing the EBI2 NAND
 	  controller. This controller is found on IPQ806x SoC.
 
+config MTD_NAND_MTK
+	tristate "Support for NAND controller on MTK SoCs"
+	depends on HAS_DMA
+	help
+	  Enables support for NAND controller on MTK SoCs.
+	  This controller is found on mt27xx, mt81xx, mt65xx SoCs.
+
 endif # MTD_NAND

drivers/mtd/nand/Makefile

@@ -57,5 +57,6 @@ obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
 obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
 obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
 obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
+obj-$(CONFIG_MTD_NAND_MTK)		+= mtk_nand.o mtk_ecc.o
 
 nand-objs := nand_base.o nand_bbt.o nand_timings.o

drivers/mtd/nand/brcmnand/brcmnand.c

@@ -340,6 +340,36 @@ static const u16 brcmnand_regs_v71[] = {
 	[BRCMNAND_FC_BASE]		= 0x400,
 };
 
+/* BRCMNAND v7.2 */
+static const u16 brcmnand_regs_v72[] = {
+	[BRCMNAND_CMD_START]		=  0x04,
+	[BRCMNAND_CMD_EXT_ADDRESS]	=  0x08,
+	[BRCMNAND_CMD_ADDRESS]		=  0x0c,
+	[BRCMNAND_INTFC_STATUS]		=  0x14,
+	[BRCMNAND_CS_SELECT]		=  0x18,
+	[BRCMNAND_CS_XOR]		=  0x1c,
+	[BRCMNAND_LL_OP]		=  0x20,
+	[BRCMNAND_CS0_BASE]		=  0x50,
+	[BRCMNAND_CS1_BASE]		=     0,
+	[BRCMNAND_CORR_THRESHOLD]	=  0xdc,
+	[BRCMNAND_CORR_THRESHOLD_EXT]	=  0xe0,
+	[BRCMNAND_UNCORR_COUNT]		=  0xfc,
+	[BRCMNAND_CORR_COUNT]		= 0x100,
+	[BRCMNAND_CORR_EXT_ADDR]	= 0x10c,
+	[BRCMNAND_CORR_ADDR]		= 0x110,
+	[BRCMNAND_UNCORR_EXT_ADDR]	= 0x114,
+	[BRCMNAND_UNCORR_ADDR]		= 0x118,
+	[BRCMNAND_SEMAPHORE]		= 0x150,
+	[BRCMNAND_ID]			= 0x194,
+	[BRCMNAND_ID_EXT]		= 0x198,
+	[BRCMNAND_LL_RDATA]		= 0x19c,
+	[BRCMNAND_OOB_READ_BASE]	= 0x200,
+	[BRCMNAND_OOB_READ_10_BASE]	=     0,
+	[BRCMNAND_OOB_WRITE_BASE]	= 0x400,
+	[BRCMNAND_OOB_WRITE_10_BASE]	=     0,
+	[BRCMNAND_FC_BASE]		= 0x600,
+};
+
 enum brcmnand_cs_reg {
 	BRCMNAND_CS_CFG_EXT = 0,
 	BRCMNAND_CS_CFG,
@@ -435,7 +465,9 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
 	}
 
 	/* Register offsets */
-	if (ctrl->nand_version >= 0x0701)
+	if (ctrl->nand_version >= 0x0702)
+		ctrl->reg_offsets = brcmnand_regs_v72;
+	else if (ctrl->nand_version >= 0x0701)
 		ctrl->reg_offsets = brcmnand_regs_v71;
 	else if (ctrl->nand_version >= 0x0600)
 		ctrl->reg_offsets = brcmnand_regs_v60;
@@ -480,7 +512,9 @@ static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
 	}
 
 	/* Maximum spare area sector size (per 512B) */
-	if (ctrl->nand_version >= 0x0600)
+	if (ctrl->nand_version >= 0x0702)
+		ctrl->max_oob = 128;
+	else if (ctrl->nand_version >= 0x0600)
 		ctrl->max_oob = 64;
 	else if (ctrl->nand_version >= 0x0500)
 		ctrl->max_oob = 32;
@@ -583,14 +617,20 @@ static void brcmnand_wr_corr_thresh(struct brcmnand_host *host, u8 val)
 	enum brcmnand_reg reg = BRCMNAND_CORR_THRESHOLD;
 	int cs = host->cs;
 
-	if (ctrl->nand_version >= 0x0600)
+	if (ctrl->nand_version >= 0x0702)
+		bits = 7;
+	else if (ctrl->nand_version >= 0x0600)
 		bits = 6;
 	else if (ctrl->nand_version >= 0x0500)
 		bits = 5;
 	else
 		bits = 4;
 
-	if (ctrl->nand_version >= 0x0600) {
+	if (ctrl->nand_version >= 0x0702) {
+		if (cs >= 4)
+			reg = BRCMNAND_CORR_THRESHOLD_EXT;
+		shift = (cs % 4) * bits;
+	} else if (ctrl->nand_version >= 0x0600) {
 		if (cs >= 5)
 			reg = BRCMNAND_CORR_THRESHOLD_EXT;
 		shift = (cs % 5) * bits;
@@ -631,19 +671,28 @@ enum {
 
 static inline u32 brcmnand_spare_area_mask(struct brcmnand_controller *ctrl)
 {
-	if (ctrl->nand_version >= 0x0600)
+	if (ctrl->nand_version >= 0x0702)
+		return GENMASK(7, 0);
+	else if (ctrl->nand_version >= 0x0600)
 		return GENMASK(6, 0);
 	else
 		return GENMASK(5, 0);
 }
 
 #define NAND_ACC_CONTROL_ECC_SHIFT	16
+#define NAND_ACC_CONTROL_ECC_EXT_SHIFT	13
 
 static inline u32 brcmnand_ecc_level_mask(struct brcmnand_controller *ctrl)
 {
 	u32 mask = (ctrl->nand_version >= 0x0600) ? 0x1f : 0x0f;
 
-	return mask << NAND_ACC_CONTROL_ECC_SHIFT;
+	mask <<= NAND_ACC_CONTROL_ECC_SHIFT;
+
+	/* v7.2 includes additional ECC levels */
+	if (ctrl->nand_version >= 0x0702)
+		mask |= 0x7 << NAND_ACC_CONTROL_ECC_EXT_SHIFT;
+
+	return mask;
 }
 
 static void brcmnand_set_ecc_enabled(struct brcmnand_host *host, int en)
@@ -667,7 +716,9 @@ static void brcmnand_set_ecc_enabled(struct brcmnand_host *host, int en)
 
 static inline int brcmnand_sector_1k_shift(struct brcmnand_controller *ctrl)
 {
-	if (ctrl->nand_version >= 0x0600)
+	if (ctrl->nand_version >= 0x0702)
+		return 9;
+	else if (ctrl->nand_version >= 0x0600)
 		return 7;
 	else if (ctrl->nand_version >= 0x0500)
 		return 6;
@@ -773,10 +824,16 @@ enum brcmnand_llop_type {
  * Internal support functions
  ***********************************************************************/
 
-static inline bool is_hamming_ecc(struct brcmnand_cfg *cfg)
+static inline bool is_hamming_ecc(struct brcmnand_controller *ctrl,
+				  struct brcmnand_cfg *cfg)
 {
-	return cfg->sector_size_1k == 0 && cfg->spare_area_size == 16 &&
-		cfg->ecc_level == 15;
+	if (ctrl->nand_version <= 0x0701)
+		return cfg->sector_size_1k == 0 && cfg->spare_area_size == 16 &&
+			cfg->ecc_level == 15;
+	else
+		return cfg->sector_size_1k == 0 && ((cfg->spare_area_size == 16 &&
+			cfg->ecc_level == 15) ||
+			(cfg->spare_area_size == 28 && cfg->ecc_level == 16));
 }
 
 /*
@@ -931,7 +988,7 @@ static int brcmstb_choose_ecc_layout(struct brcmnand_host *host)
 	if (p->sector_size_1k)
 		ecc_level <<= 1;
 
-	if (is_hamming_ecc(p)) {
+	if (is_hamming_ecc(host->ctrl, p)) {
 		ecc->bytes = 3 * sectors;
 		mtd_set_ooblayout(mtd, &brcmnand_hamming_ooblayout_ops);
 		return 0;
@@ -1108,7 +1165,7 @@ static void brcmnand_send_cmd(struct brcmnand_host *host, int cmd)
 	ctrl->cmd_pending = cmd;
 
 	intfc = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS);
-	BUG_ON(!(intfc & INTFC_CTLR_READY));
+	WARN_ON(!(intfc & INTFC_CTLR_READY));
 
 	mb(); /* flush previous writes */
 	brcmnand_write_reg(ctrl, BRCMNAND_CMD_START,
@@ -1545,6 +1602,56 @@ static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
 	return ret;
 }
 
+/*
+ * Check a page to see if it is erased (w/ bitflips) after an uncorrectable ECC
+ * error
+ *
+ * Because the HW ECC signals an ECC error if an erase paged has even a single
+ * bitflip, we must check each ECC error to see if it is actually an erased
+ * page with bitflips, not a truly corrupted page.
+ *
+ * On a real error, return a negative error code (-EBADMSG for ECC error), and
+ * buf will contain raw data.
+ * Otherwise, buf gets filled with 0xffs and return the maximum number of
+ * bitflips-per-ECC-sector to the caller.
+ *
+ */
+static int brcmstb_nand_verify_erased_page(struct mtd_info *mtd,
+		  struct nand_chip *chip, void *buf, u64 addr)
+{
+	int i, sas;
+	void *oob = chip->oob_poi;
+	int bitflips = 0;
+	int page = addr >> chip->page_shift;
+	int ret;
+
+	if (!buf) {
+		buf = chip->buffers->databuf;
+		/* Invalidate page cache */
+		chip->pagebuf = -1;
+	}
+
+	sas = mtd->oobsize / chip->ecc.steps;
+
+	/* read without ecc for verification */
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+	ret = chip->ecc.read_page_raw(mtd, chip, buf, true, page);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < chip->ecc.steps; i++, oob += sas) {
+		ret = nand_check_erased_ecc_chunk(buf, chip->ecc.size,
+						  oob, sas, NULL, 0,
+						  chip->ecc.strength);
+		if (ret < 0)
+			return ret;
+
+		bitflips = max(bitflips, ret);
+	}
+
+	return bitflips;
+}
+
 static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
 			 u64 addr, unsigned int trans, u32 *buf, u8 *oob)
 {
@@ -1552,9 +1659,11 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
 	struct brcmnand_controller *ctrl = host->ctrl;
 	u64 err_addr = 0;
 	int err;
+	bool retry = true;
 
 	dev_dbg(ctrl->dev, "read %llx -> %p\n", (unsigned long long)addr, buf);
 
+try_dmaread:
 	brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_COUNT, 0);
 
 	if (has_flash_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
@@ -1575,6 +1684,34 @@ static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
 	}
 
 	if (mtd_is_eccerr(err)) {
+		/*
+		 * On controller version and 7.0, 7.1 , DMA read after a
+		 * prior PIO read that reported uncorrectable error,
+		 * the DMA engine captures this error following DMA read
+		 * cleared only on subsequent DMA read, so just retry once
+		 * to clear a possible false error reported for current DMA
+		 * read
+		 */
+		if ((ctrl->nand_version == 0x0700) ||
+		    (ctrl->nand_version == 0x0701)) {
+			if (retry) {
+				retry = false;
+				goto try_dmaread;
+			}
+		}
+
+		/*
+		 * Controller version 7.2 has hw encoder to detect erased page
+		 * bitflips, apply sw verification for older controllers only
+		 */
+		if (ctrl->nand_version < 0x0702) {
+			err = brcmstb_nand_verify_erased_page(mtd, chip, buf,
+							      addr);
+			/* erased page bitflips corrected */
+			if (err > 0)
+				return err;
+		}
+
 		dev_dbg(ctrl->dev, "uncorrectable error at 0x%llx\n",
 			(unsigned long long)err_addr);
 		mtd->ecc_stats.failed++;
@@ -1857,7 +1994,8 @@ static int brcmnand_set_cfg(struct brcmnand_host *host,
 	return 0;
 }
 
-static void brcmnand_print_cfg(char *buf, struct brcmnand_cfg *cfg)
+static void brcmnand_print_cfg(struct brcmnand_host *host,
+			       char *buf, struct brcmnand_cfg *cfg)
 {
 	buf += sprintf(buf,
 		"%lluMiB total, %uKiB blocks, %u%s pages, %uB OOB, %u-bit",
@@ -1868,7 +2006,7 @@ static void brcmnand_print_cfg(char *buf, struct brcmnand_cfg *cfg)
 		cfg->spare_area_size, cfg->device_width);
 
 	/* Account for Hamming ECC and for BCH 512B vs 1KiB sectors */
-	if (is_hamming_ecc(cfg))
+	if (is_hamming_ecc(host->ctrl, cfg))
 		sprintf(buf, ", Hamming ECC");
 	else if (cfg->sector_size_1k)
 		sprintf(buf, ", BCH-%u (1KiB sector)", cfg->ecc_level << 1);
@@ -1987,7 +2125,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 
 	brcmnand_set_ecc_enabled(host, 1);
 
-	brcmnand_print_cfg(msg, cfg);
+	brcmnand_print_cfg(host, msg, cfg);
 	dev_info(ctrl->dev, "detected %s\n", msg);
 
 	/* Configure ACC_CONTROL */
@@ -1995,6 +2133,10 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 	tmp = nand_readreg(ctrl, offs);
 	tmp &= ~ACC_CONTROL_PARTIAL_PAGE;
 	tmp &= ~ACC_CONTROL_RD_ERASED;
+
+	/* We need to turn on Read from erased paged protected by ECC */
+	if (ctrl->nand_version >= 0x0702)
+		tmp |= ACC_CONTROL_RD_ERASED;
 	tmp &= ~ACC_CONTROL_FAST_PGM_RDIN;
 	if (ctrl->features & BRCMNAND_HAS_PREFETCH) {
 		/*
@@ -2195,6 +2337,7 @@ static const struct of_device_id brcmnand_of_match[] = {
 	{ .compatible = "brcm,brcmnand-v6.2" },
 	{ .compatible = "brcm,brcmnand-v7.0" },
 	{ .compatible = "brcm,brcmnand-v7.1" },
+	{ .compatible = "brcm,brcmnand-v7.2" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcmnand_of_match);

drivers/mtd/nand/jz4780_bch.c

@@ -375,6 +375,6 @@ static struct platform_driver jz4780_bch_driver = {
 module_platform_driver(jz4780_bch_driver);
 
 MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
-MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
 MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
 MODULE_LICENSE("GPL v2");

drivers/mtd/nand/jz4780_nand.c

@@ -412,6 +412,6 @@ static struct platform_driver jz4780_nand_driver = {
 module_platform_driver(jz4780_nand_driver);
 
 MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
-MODULE_AUTHOR("Harvey Hunt <harvey.hunt@imgtec.com>");
+MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
 MODULE_DESCRIPTION("Ingenic JZ4780 NAND driver");
 MODULE_LICENSE("GPL v2");

drivers/mtd/nand/mtk_ecc.h

+/*
+ * MTK SDG1 ECC controller
+ *
+ * Copyright (c) 2016 Mediatek
+ * Authors:	Xiaolei Li		<xiaolei.li@mediatek.com>
+ *		Jorge Ramirez-Ortiz	<jorge.ramirez-ortiz@linaro.org>
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef __DRIVERS_MTD_NAND_MTK_ECC_H__
+#define __DRIVERS_MTD_NAND_MTK_ECC_H__
+
+#include <linux/types.h>
+
+#define ECC_PARITY_BITS		(14)
+
+enum mtk_ecc_mode {ECC_DMA_MODE = 0, ECC_NFI_MODE = 1};
+enum mtk_ecc_operation {ECC_ENCODE, ECC_DECODE};
+
+struct device_node;
+struct mtk_ecc;
+
+struct mtk_ecc_stats {
+	u32 corrected;
+	u32 bitflips;
+	u32 failed;
+};
+
+struct mtk_ecc_config {
+	enum mtk_ecc_operation op;
+	enum mtk_ecc_mode mode;
+	dma_addr_t addr;
+	u32 strength;
+	u32 sectors;
+	u32 len;
+};
+
+int mtk_ecc_encode(struct mtk_ecc *, struct mtk_ecc_config *, u8 *, u32);
+void mtk_ecc_get_stats(struct mtk_ecc *, struct mtk_ecc_stats *, int);
+int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation);
+int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *);
+void mtk_ecc_disable(struct mtk_ecc *);
+void mtk_ecc_adjust_strength(u32 *);
+
+struct mtk_ecc *of_mtk_ecc_get(struct device_node *);
+void mtk_ecc_release(struct mtk_ecc *);
+
+#endif

drivers/mtd/nand/nand_base.c

@@ -2610,7 +2610,7 @@ static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
 		int cached = writelen > bytes && page != blockmask;
 		uint8_t *wbuf = buf;
 		int use_bufpoi;
-		int part_pagewr = (column || writelen < (mtd->writesize - 1));
+		int part_pagewr = (column || writelen < mtd->writesize);
 
 		if (part_pagewr)
 			use_bufpoi = 1;

drivers/mtd/nand/nand_ids.c

@@ -168,6 +168,7 @@ struct nand_flash_dev nand_flash_ids[] = {
 /* Manufacturer IDs */
 struct nand_manufacturers nand_manuf_ids[] = {
 	{NAND_MFR_TOSHIBA, "Toshiba"},
+	{NAND_MFR_ESMT, "ESMT"},
 	{NAND_MFR_SAMSUNG, "Samsung"},
 	{NAND_MFR_FUJITSU, "Fujitsu"},
 	{NAND_MFR_NATIONAL, "National"},

drivers/mtd/nand/omap2.c

@@ -118,8 +118,6 @@
 #define	PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
 #define	STATUS_BUFF_EMPTY		0x00000001
 
-#define OMAP24XX_DMA_GPMC		4
-
 #define SECTOR_BYTES		512
 /* 4 bit padding to make byte aligned, 56 = 52 + 4 */
 #define BCH4_BIT_PAD		4
@@ -1811,7 +1809,6 @@ static int omap_nand_probe(struct platform_device *pdev)
 	struct nand_chip		*nand_chip;
 	int				err;
 	dma_cap_mask_t			mask;
-	unsigned			sig;
 	struct resource			*res;
 	struct device			*dev = &pdev->dev;
 	int				min_oobbytes = BADBLOCK_MARKER_LENGTH;
@@ -1924,11 +1921,11 @@ static int omap_nand_probe(struct platform_device *pdev)
 	case NAND_OMAP_PREFETCH_DMA:
 		dma_cap_zero(mask);
 		dma_cap_set(DMA_SLAVE, mask);
-		sig = OMAP24XX_DMA_GPMC;
-		info->dma = dma_request_channel(mask, omap_dma_filter_fn, &sig);
-		if (!info->dma) {
+		info->dma = dma_request_chan(pdev->dev.parent, "rxtx");
+
+		if (IS_ERR(info->dma)) {
 			dev_err(&pdev->dev, "DMA engine request failed\n");
-			err = -ENXIO;
+			err = PTR_ERR(info->dma);
 			goto return_error;
 		} else {
 			struct dma_slave_config cfg;

drivers/mtd/nand/xway_nand.c

@@ -4,6 +4,7 @@
  *  by the Free Software Foundation.
  *
  *  Copyright © 2012 John Crispin <blogic@openwrt.org>
+ *  Copyright © 2016 Hauke Mehrtens <hauke@hauke-m.de>
  */
 
 #include <linux/mtd/nand.h>
@@ -16,20 +17,28 @@
 #define EBU_ADDSEL1		0x24
 #define EBU_NAND_CON		0xB0
 #define EBU_NAND_WAIT		0xB4
+#define  NAND_WAIT_RD		BIT(0) /* NAND flash status output */
+#define  NAND_WAIT_WR_C		BIT(3) /* NAND Write/Read complete */
 #define EBU_NAND_ECC0		0xB8
 #define EBU_NAND_ECC_AC		0xBC
 
-/* nand commands */
-#define NAND_CMD_ALE		(1 << 2)
-#define NAND_CMD_CLE		(1 << 3)
-#define NAND_CMD_CS		(1 << 4)
-#define NAND_WRITE_CMD_RESET	0xff
+/*
+ * nand commands
+ * The pins of the NAND chip are selected based on the address bits of the
+ * "register" read and write. There are no special registers, but an
+ * address range and the lower address bits are used to activate the
+ * correct line. For example when the bit (1 << 2) is set in the address
+ * the ALE pin will be activated.
+ */
+#define NAND_CMD_ALE		BIT(2) /* address latch enable */
+#define NAND_CMD_CLE		BIT(3) /* command latch enable */
+#define NAND_CMD_CS		BIT(4) /* chip select */
+#define NAND_CMD_SE		BIT(5) /* spare area access latch */
+#define NAND_CMD_WP		BIT(6) /* write protect */
 #define NAND_WRITE_CMD		(NAND_CMD_CS | NAND_CMD_CLE)
 #define NAND_WRITE_ADDR		(NAND_CMD_CS | NAND_CMD_ALE)
 #define NAND_WRITE_DATA		(NAND_CMD_CS)
 #define NAND_READ_DATA		(NAND_CMD_CS)
-#define NAND_WAIT_WR_C		(1 << 3)
-#define NAND_WAIT_RD		(0x1)
 
 /* we need to tel the ebu which addr we mapped the nand to */
 #define ADDSEL1_MASK(x)		(x << 4)
@@ -54,31 +63,41 @@
 #define NAND_CON_CSMUX		(1 << 1)
 #define NAND_CON_NANDM		1
 
-static void xway_reset_chip(struct nand_chip *chip)
+struct xway_nand_data {
+	struct nand_chip	chip;
+	unsigned long		csflags;
+	void __iomem		*nandaddr;
+};
+
+static u8 xway_readb(struct mtd_info *mtd, int op)
 {
-	unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
-	unsigned long flags;
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct xway_nand_data *data = nand_get_controller_data(chip);
 
-	nandaddr &= ~NAND_WRITE_ADDR;
-	nandaddr |= NAND_WRITE_CMD;
+	return readb(data->nandaddr + op);
+}
 
-	/* finish with a reset */
-	spin_lock_irqsave(&ebu_lock, flags);
-	writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
-	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-		;
-	spin_unlock_irqrestore(&ebu_lock, flags);
+static void xway_writeb(struct mtd_info *mtd, int op, u8 value)
+{
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct xway_nand_data *data = nand_get_controller_data(chip);
+
+	writeb(value, data->nandaddr + op);
 }
 
-static void xway_select_chip(struct mtd_info *mtd, int chip)
+static void xway_select_chip(struct mtd_info *mtd, int select)
 {
+	struct nand_chip *chip = mtd_to_nand(mtd);
+	struct xway_nand_data *data = nand_get_controller_data(chip);
 
-	switch (chip) {
+	switch (select) {
 	case -1:
 		ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
 		ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
+		spin_unlock_irqrestore(&ebu_lock, data->csflags);
 		break;
 	case 0:
+		spin_lock_irqsave(&ebu_lock, data->csflags);
 		ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
 		ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
 		break;
@@ -89,26 +108,16 @@ static void xway_select_chip(struct mtd_info *mtd, int chip)
 
 static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
-	struct nand_chip *this = mtd_to_nand(mtd);
-	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-	unsigned long flags;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
-		if (ctrl & NAND_CLE)
-			nandaddr |= NAND_WRITE_CMD;
-		else
-			nandaddr |= NAND_WRITE_ADDR;
-		this->IO_ADDR_W = (void __iomem *) nandaddr;
-	}
+	if (cmd == NAND_CMD_NONE)
+		return;
 
-	if (cmd != NAND_CMD_NONE) {
-		spin_lock_irqsave(&ebu_lock, flags);
-		writeb(cmd, this->IO_ADDR_W);
-		while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
-			;
-		spin_unlock_irqrestore(&ebu_lock, flags);
-	}
+	if (ctrl & NAND_CLE)
+		xway_writeb(mtd, NAND_WRITE_CMD, cmd);
+	else if (ctrl & NAND_ALE)
+		xway_writeb(mtd, NAND_WRITE_ADDR, cmd);
+
+	while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+		;
 }
 
 static int xway_dev_ready(struct mtd_info *mtd)
@@ -118,80 +127,122 @@ static int xway_dev_ready(struct mtd_info *mtd)
 
 static unsigned char xway_read_byte(struct mtd_info *mtd)
 {
-	struct nand_chip *this = mtd_to_nand(mtd);
-	unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
-	unsigned long flags;
-	int ret;
+	return xway_readb(mtd, NAND_READ_DATA);
+}
+
+static void xway_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+	int i;
 
-	spin_lock_irqsave(&ebu_lock, flags);
-	ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
-	spin_unlock_irqrestore(&ebu_lock, flags);
+	for (i = 0; i < len; i++)
+		buf[i] = xway_readb(mtd, NAND_WRITE_DATA);
+}
 
-	return ret;
+static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++)
+		xway_writeb(mtd, NAND_WRITE_DATA, buf[i]);
 }
 
+/*
+ * Probe for the NAND device.
+ */
 static int xway_nand_probe(struct platform_device *pdev)
 {
-	struct nand_chip *this = platform_get_drvdata(pdev);
-	unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
-	const __be32 *cs = of_get_property(pdev->dev.of_node,
-					"lantiq,cs", NULL);
+	struct xway_nand_data *data;
+	struct mtd_info *mtd;
+	struct resource *res;
+	int err;
+	u32 cs;
 	u32 cs_flag = 0;
 
+	/* Allocate memory for the device structure (and zero it) */
+	data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	data->nandaddr = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(data->nandaddr))
+		return PTR_ERR(data->nandaddr);
+
+	nand_set_flash_node(&data->chip, pdev->dev.of_node);
+	mtd = nand_to_mtd(&data->chip);
+	mtd->dev.parent = &pdev->dev;
+
+	data->chip.cmd_ctrl = xway_cmd_ctrl;
+	data->chip.dev_ready = xway_dev_ready;
+	data->chip.select_chip = xway_select_chip;
+	data->chip.write_buf = xway_write_buf;
+	data->chip.read_buf = xway_read_buf;
+	data->chip.read_byte = xway_read_byte;
+	data->chip.chip_delay = 30;
+
+	data->chip.ecc.mode = NAND_ECC_SOFT;
+	data->chip.ecc.algo = NAND_ECC_HAMMING;
+
+	platform_set_drvdata(pdev, data);
+	nand_set_controller_data(&data->chip, data);
+
 	/* load our CS from the DT. Either we find a valid 1 or default to 0 */
-	if (cs && (*cs == 1))
+	err = of_property_read_u32(pdev->dev.of_node, "lantiq,cs", &cs);
+	if (!err && cs == 1)
 		cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
 
 	/* setup the EBU to run in NAND mode on our base addr */
-	ltq_ebu_w32(CPHYSADDR(nandaddr)
-		| ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
+	ltq_ebu_w32(CPHYSADDR(data->nandaddr)
+		    | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
 
 	ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
-		| BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
-		| BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
+		    | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
+		    | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
 
 	ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
-		| NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
-		| cs_flag, EBU_NAND_CON);
+		    | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
+		    | cs_flag, EBU_NAND_CON);
 
-	/* finish with a reset */
-	xway_reset_chip(this);
+	/* Scan to find existence of the device */
+	err = nand_scan(mtd, 1);
+	if (err)
+		return err;
 
-	return 0;
-}
+	err = mtd_device_register(mtd, NULL, 0);
+	if (err)
+		nand_release(mtd);
 
-static struct platform_nand_data xway_nand_data = {
-	.chip = {
-		.nr_chips		= 1,
-		.chip_delay		= 30,
-	},
-	.ctrl = {
-		.probe		= xway_nand_probe,
-		.cmd_ctrl	= xway_cmd_ctrl,
-		.dev_ready	= xway_dev_ready,
-		.select_chip	= xway_select_chip,
-		.read_byte	= xway_read_byte,
-	}
-};
+	return err;
+}
 
 /*
- * Try to find the node inside the DT. If it is available attach out
- * platform_nand_data
+ * Remove a NAND device.
  */
-static int __init xway_register_nand(void)
+static int xway_nand_remove(struct platform_device *pdev)
 {
-	struct device_node *node;
-	struct platform_device *pdev;
-
-	node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway");
-	if (!node)
-		return -ENOENT;
-	pdev = of_find_device_by_node(node);
-	if (!pdev)
-		return -EINVAL;
-	pdev->dev.platform_data = &xway_nand_data;
-	of_node_put(node);
+	struct xway_nand_data *data = platform_get_drvdata(pdev);
+
+	nand_release(nand_to_mtd(&data->chip));
+
 	return 0;
 }
 
-subsys_initcall(xway_register_nand);
+static const struct of_device_id xway_nand_match[] = {
+	{ .compatible = "lantiq,nand-xway" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xway_nand_match);
+
+static struct platform_driver xway_nand_driver = {
+	.probe	= xway_nand_probe,
+	.remove	= xway_nand_remove,
+	.driver	= {
+		.name		= "lantiq,nand-xway",
+		.of_match_table = xway_nand_match,
+	},
+};
+
+module_platform_driver(xway_nand_driver);
+
+MODULE_LICENSE("GPL");

drivers/mtd/onenand/onenand_base.c

@@ -3188,13 +3188,13 @@ static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
 			size_t tmp_retlen;
 
 			ret = action(mtd, from, len, &tmp_retlen, buf);
+			if (ret)
+				break;
 
 			buf += tmp_retlen;
 			len -= tmp_retlen;
 			*retlen += tmp_retlen;
 
-			if (ret)
-				break;
 		}
 		otp_pages--;
 	}

drivers/mtd/spi-nor/Kconfig

@@ -29,6 +29,26 @@ config MTD_SPI_NOR_USE_4K_SECTORS
 	  Please note that some tools/drivers/filesystems may not work with
 	  4096 B erase size (e.g. UBIFS requires 15 KiB as a minimum).
 
+config SPI_ATMEL_QUADSPI
+	tristate "Atmel Quad SPI Controller"
+	depends on ARCH_AT91 || (ARM && COMPILE_TEST)
+	depends on OF && HAS_IOMEM
+	help
+	  This enables support for the Quad SPI controller in master mode.
+	  This driver does not support generic SPI. The implementation only
+	  supports SPI NOR.
+
+config SPI_CADENCE_QUADSPI
+	tristate "Cadence Quad SPI controller"
+	depends on OF && ARM
+	help
+	  Enable support for the Cadence Quad SPI Flash controller.
+
+	  Cadence QSPI is a specialized controller for connecting an SPI
+	  Flash over 1/2/4-bit wide bus. Enable this option if you have a
+	  device with a Cadence QSPI controller and want to access the
+	  Flash as an MTD device.
+
 config SPI_FSL_QUADSPI
 	tristate "Freescale Quad SPI controller"
 	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
@@ -38,6 +58,13 @@ config SPI_FSL_QUADSPI
 	  This controller does not support generic SPI. It only supports
 	  SPI NOR.
 
+config SPI_HISI_SFC
+	tristate "Hisilicon SPI-NOR Flash Controller(SFC)"
+	depends on ARCH_HISI || COMPILE_TEST
+	depends on HAS_IOMEM && HAS_DMA
+	help
+	  This enables support for hisilicon SPI-NOR flash controller.
+
 config SPI_NXP_SPIFI
 	tristate "NXP SPI Flash Interface (SPIFI)"
 	depends on OF && (ARCH_LPC18XX || COMPILE_TEST)

drivers/mtd/spi-nor/Makefile

 obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
+obj-$(CONFIG_SPI_ATMEL_QUADSPI)	+= atmel-quadspi.o
+obj-$(CONFIG_SPI_CADENCE_QUADSPI)	+= cadence-quadspi.o
 obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
+obj-$(CONFIG_SPI_HISI_SFC)	+= hisi-sfc.o
 obj-$(CONFIG_MTD_MT81xx_NOR)    += mtk-quadspi.o
 obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o

drivers/mtd/spi-nor/fsl-quadspi.c

@@ -618,9 +618,9 @@ static inline void fsl_qspi_invalid(struct fsl_qspi *q)
 	qspi_writel(q, reg, q->iobase + QUADSPI_MCR);
 }
 
-static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
+static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
 				u8 opcode, unsigned int to, u32 *txbuf,
-				unsigned count, size_t *retlen)
+				unsigned count)
 {
 	int ret, i, j;
 	u32 tmp;
@@ -647,8 +647,8 @@ static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor,
 	/* Trigger it */
 	ret = fsl_qspi_runcmd(q, opcode, to, count);
 
-	if (ret == 0 && retlen)
-		*retlen += count;
+	if (ret == 0)
+		return count;
 
 	return ret;
 }
@@ -859,7 +859,9 @@ static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 
 	} else if (len > 0) {
 		ret = fsl_qspi_nor_write(q, nor, opcode, 0,
-					(u32 *)buf, len, NULL);
+					(u32 *)buf, len);
+		if (ret > 0)
+			return 0;
 	} else {
 		dev_err(q->dev, "invalid cmd %d\n", opcode);
 		ret = -EINVAL;
@@ -868,20 +870,20 @@ static int fsl_qspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 	return ret;
 }
 
-static void fsl_qspi_write(struct spi_nor *nor, loff_t to,
-		size_t len, size_t *retlen, const u_char *buf)
+static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to,
+			      size_t len, const u_char *buf)
 {
 	struct fsl_qspi *q = nor->priv;
-
-	fsl_qspi_nor_write(q, nor, nor->program_opcode, to,
-				(u32 *)buf, len, retlen);
+	ssize_t ret = fsl_qspi_nor_write(q, nor, nor->program_opcode, to,
+					 (u32 *)buf, len);
 
 	/* invalid the data in the AHB buffer. */
 	fsl_qspi_invalid(q);
+	return ret;
 }
 
-static int fsl_qspi_read(struct spi_nor *nor, loff_t from,
-		size_t len, size_t *retlen, u_char *buf)
+static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from,
+			     size_t len, u_char *buf)
 {
 	struct fsl_qspi *q = nor->priv;
 	u8 cmd = nor->read_opcode;
@@ -923,8 +925,7 @@ static int fsl_qspi_read(struct spi_nor *nor, loff_t from,
 	memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs,
 		len);
 
-	*retlen += len;
-	return 0;
+	return len;
 }
 
 static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs)

drivers/mtd/spi-nor/mtk-quadspi.c

@@ -21,7 +21,6 @@
 #include <linux/ioport.h>
 #include <linux/math64.h>
 #include <linux/module.h>
-#include <linux/mtd/mtd.h>
 #include <linux/mutex.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -243,8 +242,8 @@ static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr)
 	writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR3_REG);
 }
 
-static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length,
-			   size_t *retlen, u_char *buffer)
+static ssize_t mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length,
+			       u_char *buffer)
 {
 	int i, ret;
 	int addr = (int)from;
@@ -255,13 +254,13 @@ static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length,
 	mt8173_nor_set_read_mode(mt8173_nor);
 	mt8173_nor_set_addr(mt8173_nor, addr);
 
-	for (i = 0; i < length; i++, (*retlen)++) {
+	for (i = 0; i < length; i++) {
 		ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD);
 		if (ret < 0)
 			return ret;
 		buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG);
 	}
-	return 0;
+	return length;
 }
 
 static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor,
@@ -297,36 +296,44 @@ static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int addr,
 	return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD);
 }
 
-static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
-			     size_t *retlen, const u_char *buf)
+static ssize_t mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
+				const u_char *buf)
 {
 	int ret;
 	struct mt8173_nor *mt8173_nor = nor->priv;
+	size_t i;
 
 	ret = mt8173_nor_write_buffer_enable(mt8173_nor);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_warn(mt8173_nor->dev, "write buffer enable failed!\n");
+		return ret;
+	}
 
-	while (len >= SFLASH_WRBUF_SIZE) {
+	for (i = 0; i + SFLASH_WRBUF_SIZE <= len; i += SFLASH_WRBUF_SIZE) {
 		ret = mt8173_nor_write_buffer(mt8173_nor, to, buf);
-		if (ret < 0)
+		if (ret < 0) {
 			dev_err(mt8173_nor->dev, "write buffer failed!\n");
-		len -= SFLASH_WRBUF_SIZE;
+			return ret;
+		}
 		to += SFLASH_WRBUF_SIZE;
 		buf += SFLASH_WRBUF_SIZE;
-		(*retlen) += SFLASH_WRBUF_SIZE;
 	}
 	ret = mt8173_nor_write_buffer_disable(mt8173_nor);
-	if (ret < 0)
+	if (ret < 0) {
 		dev_warn(mt8173_nor->dev, "write buffer disable failed!\n");
+		return ret;
+	}
 
-	if (len) {
-		ret = mt8173_nor_write_single_byte(mt8173_nor, to, (int)len,
-						   (u8 *)buf);
-		if (ret < 0)
+	if (i < len) {
+		ret = mt8173_nor_write_single_byte(mt8173_nor, to,
+						   (int)(len - i), (u8 *)buf);
+		if (ret < 0) {
 			dev_err(mt8173_nor->dev, "write single byte failed!\n");
-		(*retlen) += len;
+			return ret;
+		}
 	}
+
+	return len;
 }
 
 static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)

drivers/mtd/spi-nor/nxp-spifi.c

@@ -172,8 +172,8 @@ static int nxp_spifi_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 	return nxp_spifi_wait_for_cmd(spifi);
 }
 
-static int nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
-			  size_t *retlen, u_char *buf)
+static ssize_t nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
+			      u_char *buf)
 {
 	struct nxp_spifi *spifi = nor->priv;
 	int ret;
@@ -183,24 +183,23 @@ static int nxp_spifi_read(struct spi_nor *nor, loff_t from, size_t len,
 		return ret;
 
 	memcpy_fromio(buf, spifi->flash_base + from, len);
-	*retlen += len;
 
-	return 0;
+	return len;
 }
 
-static void nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
-			    size_t *retlen, const u_char *buf)
+static ssize_t nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
+			       const u_char *buf)
 {
 	struct nxp_spifi *spifi = nor->priv;
 	u32 cmd;
 	int ret;
+	size_t i;
 
 	ret = nxp_spifi_set_memory_mode_off(spifi);
 	if (ret)
-		return;
+		return ret;
 
 	writel(to, spifi->io_base + SPIFI_ADDR);
-	*retlen += len;
 
 	cmd = SPIFI_CMD_DOUT |
 	      SPIFI_CMD_DATALEN(len) |
@@ -209,10 +208,14 @@ static void nxp_spifi_write(struct spi_nor *nor, loff_t to, size_t len,
 	      SPIFI_CMD_FRAMEFORM(spifi->nor.addr_width + 1);
 	writel(cmd, spifi->io_base + SPIFI_CMD);
 
-	while (len--)
-		writeb(*buf++, spifi->io_base + SPIFI_DATA);
+	for (i = 0; i < len; i++)
+		writeb(buf[i], spifi->io_base + SPIFI_DATA);
+
+	ret = nxp_spifi_wait_for_cmd(spifi);
+	if (ret)
+		return ret;
 
-	nxp_spifi_wait_for_cmd(spifi);
+	return len;
 }
 
 static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs)

drivers/mtd/ssfdc.c

@@ -380,8 +380,7 @@ static int ssfdcr_readsect(struct mtd_blktrans_dev *dev,
 		" block_addr=%d\n", logic_sect_no, sectors_per_block, offset,
 		block_address);
 
-	if (block_address >= ssfdc->map_len)
-		BUG();
+	BUG_ON(block_address >= ssfdc->map_len);
 
 	block_address = ssfdc->logic_block_map[block_address];
 

drivers/mtd/tests/nandbiterrs.c

@@ -290,7 +290,7 @@ static int overwrite_test(void)
 
 	while (opno < max_overwrite) {
 
-		err = rewrite_page(0);
+		err = write_page(0);
 		if (err)
 			break;
 

include/linux/mtd/nand.h

@@ -783,6 +783,7 @@ static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
  * NAND Flash Manufacturer ID Codes
  */
 #define NAND_MFR_TOSHIBA	0x98
+#define NAND_MFR_ESMT		0xc8
 #define NAND_MFR_SAMSUNG	0xec
 #define NAND_MFR_FUJITSU	0x04
 #define NAND_MFR_NATIONAL	0x8f

include/linux/mtd/spi-nor.h

@@ -173,10 +173,10 @@ struct spi_nor {
 	int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
 	int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len);
 
-	int (*read)(struct spi_nor *nor, loff_t from,
-			size_t len, size_t *retlen, u_char *read_buf);
-	void (*write)(struct spi_nor *nor, loff_t to,
-			size_t len, size_t *retlen, const u_char *write_buf);
+	ssize_t (*read)(struct spi_nor *nor, loff_t from,
+			size_t len, u_char *read_buf);
+	ssize_t (*write)(struct spi_nor *nor, loff_t to,
+			size_t len, const u_char *write_buf);
 	int (*erase)(struct spi_nor *nor, loff_t offs);
 
 	int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len);