Merge tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add a new framework for CPU idle time injection, to be used by
  all of the idle injection code in the kernel in the future, fix some
  issues and add a number of relatively small extensions in multiple
  places.

  Specifics:

   - Add a new framework for CPU idle time injection (Daniel Lezcano).

   - Add AVS support to the armada-37xx cpufreq driver (Gregory
     CLEMENT).

   - Add support for current CPU frequency reporting to the ACPI CPPC
     cpufreq driver (George Cherian).

   - Rework the cooling device registration in the imx6q/thermal driver
     (Bastian Stender).

   - Make the pcc-cpufreq driver refuse to work with dynamic scaling
     governors on systems with many CPUs to avoid scalability issues
     with it (Rafael Wysocki).

   - Fix the intel_pstate driver to report different maximum CPU
     frequencies on systems where they really are different and to
     ignore the turbo active ratio if hardware-managend P-states (HWP)
     are in use; make it use the match_string() helper (Xie Yisheng,
     Srinivas Pandruvada).

   - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver
     (Niklas Cassel).

   - Add a tracepoint for the tracking of frequency limits changes (from
     Andriod) to the cpufreq core (Ruchi Kandoi).

   - Fix a circular lock dependency between CPU hotplug and sysfs
     locking in the cpufreq core reported by lockdep (Waiman Long).

   - Avoid excessive error reports on driver registration failures in
     the ARM cpuidle driver (Sudeep Holla).

   - Add a new device links flag to the driver core to make links go
     away automatically on supplier driver removal (Vivek Gautam).

   - Eliminate potential race condition between system-wide power
     management transitions and system shutdown (Pingfan Liu).

   - Add a quirk to save NVS memory on system suspend for the ASUS 1025C
     laptop (Willy Tarreau).

   - Make more systems use suspend-to-idle (instead of ACPI S3) by
     default (Tristian Celestin).

   - Get rid of stack VLA usage in the low-level hibernation code on
     64-bit x86 (Kees Cook).

   - Fix error handling in the hibernation core and mark an expected
     fall-through switch in it (Chengguang Xu, Gustavo Silva).

   - Extend the generic power domains (genpd) framework to support
     attaching a device to a power domain by name (Ulf Hansson).

   - Fix device reference counting and user limits initialization in the
     devfreq core (Arvind Yadav, Matthias Kaehlcke).

   - Fix a few issues in the rk3399_dmc devfreq driver and improve its
     documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner).

   - Drop a redundant error message from the exynos-ppmu devfreq driver
     (Markus Elfring)"

* tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
  PM / reboot: Eliminate race between reboot and suspend
  PM / hibernate: Mark expected switch fall-through
  cpufreq: intel_pstate: Ignore turbo active ratio in HWP
  cpufreq: Fix a circular lock dependency problem
  cpu/hotplug: Add a cpus_read_trylock() function
  x86/power/hibernate_64: Remove VLA usage
  cpufreq: trace frequency limits change
  cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP
  cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems
  cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER
  cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC
  cpufreq: armada-37xx: Add AVS support
  dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding
  PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload.
  PM / devfreq: Init user limits from OPP limits, not viceversa
  PM / devfreq: rk3399_dmc: fix spelling mistakes.
  PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer.
  dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional.
  PM / devfreq: rk3399_dmc: remove wait for dcf irq event.
  dt-bindings: clock: add rk3399 DDR3 standard speed bins.
  ...

Documentation/devicetree/bindings/arm/marvell/armada-37xx.txt

@@ -33,3 +33,18 @@ nb_pm: syscon@14000 {
 	compatible = "marvell,armada-3700-nb-pm", "syscon";
 	reg = <0x14000 0x60>;
 }
+
+AVS
+---
+
+For AVS an other component is needed:
+
+Required properties:
+- compatible     : should contain "marvell,armada-3700-avs", "syscon";
+- reg            : the register start and length for the AVS
+
+Example:
+avs: avs@11500 {
+	compatible = "marvell,armada-3700-avs", "syscon";
+	reg = <0x11500 0x40>;
+}

Documentation/devicetree/bindings/power/power_domain.txt

@@ -114,18 +114,26 @@ Required properties:
  - power-domains : A list of PM domain specifiers, as defined by bindings of
 		the power controller that is the PM domain provider.
 
+Optional properties:
+ - power-domain-names : A list of power domain name strings sorted in the same
+		order as the power-domains property. Consumers drivers will use
+		power-domain-names to match power domains with power-domains
+		specifiers.
+
 Example:
 
 	leaky-device@12350000 {
 		compatible = "foo,i-leak-current";
 		reg = <0x12350000 0x1000>;
 		power-domains = <&power 0>;
+		power-domain-names = "io";
 	};
 
 	leaky-device@12351000 {
 		compatible = "foo,i-leak-current";
 		reg = <0x12351000 0x1000>;
 		power-domains = <&power 0>, <&power 1> ;
+		power-domain-names = "io", "clk";
 	};
 
 The first example above defines a typical PM domain consumer device, which is

Documentation/driver-api/device_link.rst

@@ -81,10 +81,14 @@ integration is desired.
 Two other flags are specifically targeted at use cases where the device
 link is added from the consumer's ``->probe`` callback:  ``DL_FLAG_RPM_ACTIVE``
 can be specified to runtime resume the supplier upon addition of the
-device link.  ``DL_FLAG_AUTOREMOVE`` causes the device link to be automatically
-purged when the consumer fails to probe or later unbinds.  This obviates
-the need to explicitly delete the link in the ``->remove`` callback or in
-the error path of the ``->probe`` callback.
+device link.  ``DL_FLAG_AUTOREMOVE_CONSUMER`` causes the device link to be
+automatically purged when the consumer fails to probe or later unbinds.
+This obviates the need to explicitly delete the link in the ``->remove``
+callback or in the error path of the ``->probe`` callback.
+
+Similarly, when the device link is added from supplier's ``->probe`` callback,
+``DL_FLAG_AUTOREMOVE_SUPPLIER`` causes the device link to be automatically
+purged when the supplier fails to probe or later unbinds.
 
 Limitations
 ===========

Documentation/power/freezing-of-tasks.txt

@@ -204,26 +204,26 @@ VI. Are there any precautions to be taken to prevent freezing failures?
 
 Yes, there are.
 
-First of all, grabbing the 'pm_mutex' lock to mutually exclude a piece of code
+First of all, grabbing the 'system_transition_mutex' lock to mutually exclude a piece of code
 from system-wide sleep such as suspend/hibernation is not encouraged.
 If possible, that piece of code must instead hook onto the suspend/hibernation
 notifiers to achieve mutual exclusion. Look at the CPU-Hotplug code
 (kernel/cpu.c) for an example.
 
-However, if that is not feasible, and grabbing 'pm_mutex' is deemed necessary,
-it is strongly discouraged to directly call mutex_[un]lock(&pm_mutex) since
+However, if that is not feasible, and grabbing 'system_transition_mutex' is deemed necessary,
+it is strongly discouraged to directly call mutex_[un]lock(&system_transition_mutex) since
 that could lead to freezing failures, because if the suspend/hibernate code
-successfully acquired the 'pm_mutex' lock, and hence that other entity failed
+successfully acquired the 'system_transition_mutex' lock, and hence that other entity failed
 to acquire the lock, then that task would get blocked in TASK_UNINTERRUPTIBLE
 state. As a consequence, the freezer would not be able to freeze that task,
 leading to freezing failure.
 
 However, the [un]lock_system_sleep() APIs are safe to use in this scenario,
 since they ask the freezer to skip freezing this task, since it is anyway
-"frozen enough" as it is blocked on 'pm_mutex', which will be released
+"frozen enough" as it is blocked on 'system_transition_mutex', which will be released
 only after the entire suspend/hibernation sequence is complete.
 So, to summarize, use [un]lock_system_sleep() instead of directly using
-mutex_[un]lock(&pm_mutex). That would prevent freezing failures.
+mutex_[un]lock(&system_transition_mutex). That would prevent freezing failures.
 
 V. Miscellaneous
 /sys/power/pm_freeze_timeout controls how long it will cost at most to freeze

Documentation/power/suspend-and-cpuhotplug.txt

@@ -32,7 +32,7 @@ More details follow:
                                     sysfs file
                                         |
                                         v
-                               Acquire pm_mutex lock
+                               Acquire system_transition_mutex lock
                                         |
                                         v
                              Send PM_SUSPEND_PREPARE
@@ -96,10 +96,10 @@ execution during resume):
 
 * thaw tasks
 * send PM_POST_SUSPEND notifications
-* Release pm_mutex lock.
+* Release system_transition_mutex lock.
 
 
-It is to be noted here that the pm_mutex lock is acquired at the very
+It is to be noted here that the system_transition_mutex lock is acquired at the very
 beginning, when we are just starting out to suspend, and then released only
 after the entire cycle is complete (i.e., suspend + resume).
 

Documentation/trace/events-power.rst

@@ -27,6 +27,7 @@ cpufreq.
 
   cpu_idle		"state=%lu cpu_id=%lu"
   cpu_frequency		"state=%lu cpu_id=%lu"
+  cpu_frequency_limits	"min=%lu max=%lu cpu_id=%lu"
 
 A suspend event is used to indicate the system going in and out of the
 suspend mode:

arch/x86/power/hibernate_64.c

@@ -233,29 +233,35 @@ struct restore_data_record {
  */
 static int get_e820_md5(struct e820_table *table, void *buf)
 {
-	struct scatterlist sg;
-	struct crypto_ahash *tfm;
+	struct crypto_shash *tfm;
+	struct shash_desc *desc;
 	int size;
 	int ret = 0;
 
-	tfm = crypto_alloc_ahash("md5", 0, CRYPTO_ALG_ASYNC);
+	tfm = crypto_alloc_shash("md5", 0, 0);
 	if (IS_ERR(tfm))
 		return -ENOMEM;
 
-	{
-		AHASH_REQUEST_ON_STACK(req, tfm);
-		size = offsetof(struct e820_table, entries) + sizeof(struct e820_entry) * table->nr_entries;
-		ahash_request_set_tfm(req, tfm);
-		sg_init_one(&sg, (u8 *)table, size);
-		ahash_request_set_callback(req, 0, NULL, NULL);
-		ahash_request_set_crypt(req, &sg, buf, size);
+	desc = kmalloc(sizeof(struct shash_desc) + crypto_shash_descsize(tfm),
+		       GFP_KERNEL);
+	if (!desc) {
+		ret = -ENOMEM;
+		goto free_tfm;
+	}
+
+	desc->tfm = tfm;
+	desc->flags = 0;
+
+	size = offsetof(struct e820_table, entries) +
+		sizeof(struct e820_entry) * table->nr_entries;
 
-		if (crypto_ahash_digest(req))
+	if (crypto_shash_digest(desc, (u8 *)table, size, buf))
 		ret = -EINVAL;
-		ahash_request_zero(req);
-	}
-	crypto_free_ahash(tfm);
 
+	kzfree(desc);
+
+free_tfm:
+	crypto_free_shash(tfm);
 	return ret;
 }
 

drivers/acpi/sleep.c

@@ -338,6 +338,14 @@ static const struct dmi_system_id acpisleep_dmi_table[] __initconst = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 		},
 	},
+	{
+	.callback = init_nvs_save_s3,
+	.ident = "Asus 1025C",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "1025C"),
+		},
+	},
 	/*
 	 * https://bugzilla.kernel.org/show_bug.cgi?id=189431
 	 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory
@@ -718,9 +726,6 @@ static const struct acpi_device_id lps0_device_ids[] = {
 #define ACPI_LPS0_ENTRY		5
 #define ACPI_LPS0_EXIT		6
 
-#define ACPI_LPS0_SCREEN_MASK	((1 << ACPI_LPS0_SCREEN_OFF) | (1 << ACPI_LPS0_SCREEN_ON))
-#define ACPI_LPS0_PLATFORM_MASK	((1 << ACPI_LPS0_ENTRY) | (1 << ACPI_LPS0_EXIT))
-
 static acpi_handle lps0_device_handle;
 static guid_t lps0_dsm_guid;
 static char lps0_dsm_func_mask;
@@ -924,8 +929,6 @@ static int lps0_device_attach(struct acpi_device *adev,
 	if (out_obj && out_obj->type == ACPI_TYPE_BUFFER) {
 		char bitmask = *(char *)out_obj->buffer.pointer;
 
-		if ((bitmask & ACPI_LPS0_PLATFORM_MASK) == ACPI_LPS0_PLATFORM_MASK ||
-		    (bitmask & ACPI_LPS0_SCREEN_MASK) == ACPI_LPS0_SCREEN_MASK) {
 		lps0_dsm_func_mask = bitmask;
 		lps0_device_handle = adev->handle;
 		/*
@@ -934,7 +937,6 @@ static int lps0_device_attach(struct acpi_device *adev,
 		 */
 		if (mem_sleep_default > PM_SUSPEND_MEM)
 			mem_sleep_current = PM_SUSPEND_TO_IDLE;
-		}
 
 		acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n",
 				  bitmask);

drivers/base/core.c

@@ -178,10 +178,10 @@ void device_pm_move_to_tail(struct device *dev)
  * of the link.  If DL_FLAG_PM_RUNTIME is not set, DL_FLAG_RPM_ACTIVE will be
  * ignored.
  *
- * If the DL_FLAG_AUTOREMOVE is set, the link will be removed automatically
- * when the consumer device driver unbinds from it.  The combination of both
- * DL_FLAG_AUTOREMOVE and DL_FLAG_STATELESS set is invalid and will cause NULL
- * to be returned.
+ * If the DL_FLAG_AUTOREMOVE_CONSUMER is set, the link will be removed
+ * automatically when the consumer device driver unbinds from it.
+ * The combination of both DL_FLAG_AUTOREMOVE_CONSUMER and DL_FLAG_STATELESS
+ * set is invalid and will cause NULL to be returned.
  *
  * A side effect of the link creation is re-ordering of dpm_list and the
  * devices_kset list by moving the consumer device and all devices depending
@@ -198,7 +198,8 @@ struct device_link *device_link_add(struct device *consumer,
 	struct device_link *link;
 
 	if (!consumer || !supplier ||
-	    ((flags & DL_FLAG_STATELESS) && (flags & DL_FLAG_AUTOREMOVE)))
+	    ((flags & DL_FLAG_STATELESS) &&
+	     (flags & DL_FLAG_AUTOREMOVE_CONSUMER)))
 		return NULL;
 
 	device_links_write_lock();
@@ -509,7 +510,7 @@ static void __device_links_no_driver(struct device *dev)
 		if (link->flags & DL_FLAG_STATELESS)
 			continue;
 
-		if (link->flags & DL_FLAG_AUTOREMOVE)
+		if (link->flags & DL_FLAG_AUTOREMOVE_CONSUMER)
 			kref_put(&link->kref, __device_link_del);
 		else if (link->status != DL_STATE_SUPPLIER_UNBIND)
 			WRITE_ONCE(link->status, DL_STATE_AVAILABLE);
@@ -545,8 +546,18 @@ void device_links_driver_cleanup(struct device *dev)
 		if (link->flags & DL_FLAG_STATELESS)
 			continue;
 
-		WARN_ON(link->flags & DL_FLAG_AUTOREMOVE);
+		WARN_ON(link->flags & DL_FLAG_AUTOREMOVE_CONSUMER);
 		WARN_ON(link->status != DL_STATE_SUPPLIER_UNBIND);
+
+		/*
+		 * autoremove the links between this @dev and its consumer
+		 * devices that are not active, i.e. where the link state
+		 * has moved to DL_STATE_SUPPLIER_UNBIND.
+		 */
+		if (link->status == DL_STATE_SUPPLIER_UNBIND &&
+		    link->flags & DL_FLAG_AUTOREMOVE_SUPPLIER)
+			kref_put(&link->kref, __device_link_del);
+
 		WRITE_ONCE(link->status, DL_STATE_DORMANT);
 	}
 

drivers/base/power/common.c

@@ -152,6 +152,23 @@ struct device *dev_pm_domain_attach_by_id(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(dev_pm_domain_attach_by_id);
 
+/**
+ * dev_pm_domain_attach_by_name - Associate a device with one of its PM domains.
+ * @dev: The device used to lookup the PM domain.
+ * @name: The name of the PM domain.
+ *
+ * For a detailed function description, see dev_pm_domain_attach_by_id().
+ */
+struct device *dev_pm_domain_attach_by_name(struct device *dev,
+					    char *name)
+{
+	if (dev->pm_domain)
+		return ERR_PTR(-EEXIST);
+
+	return genpd_dev_pm_attach_by_name(dev, name);
+}
+EXPORT_SYMBOL_GPL(dev_pm_domain_attach_by_name);
+
 /**
  * dev_pm_domain_detach - Detach a device from its PM domain.
  * @dev: Device to detach.

drivers/base/power/domain.c

@@ -2374,6 +2374,30 @@ struct device *genpd_dev_pm_attach_by_id(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(genpd_dev_pm_attach_by_id);
 
+/**
+ * genpd_dev_pm_attach_by_name - Associate a device with one of its PM domains.
+ * @dev: The device used to lookup the PM domain.
+ * @name: The name of the PM domain.
+ *
+ * Parse device's OF node to find a PM domain specifier using the
+ * power-domain-names DT property. For further description see
+ * genpd_dev_pm_attach_by_id().
+ */
+struct device *genpd_dev_pm_attach_by_name(struct device *dev, char *name)
+{
+	int index;
+
+	if (!dev->of_node)
+		return NULL;
+
+	index = of_property_match_string(dev->of_node, "power-domain-names",
+					 name);
+	if (index < 0)
+		return NULL;
+
+	return genpd_dev_pm_attach_by_id(dev, index);
+}
+
 static const struct of_device_id idle_state_match[] = {
 	{ .compatible = "domain-idle-state", },
 	{ }

drivers/cpufreq/armada-37xx-cpufreq.c

@@ -51,6 +51,16 @@
 #define  ARMADA_37XX_DVFS_LOAD_2	2
 #define  ARMADA_37XX_DVFS_LOAD_3	3
 
+/* AVS register set */
+#define ARMADA_37XX_AVS_CTL0		0x0
+#define	 ARMADA_37XX_AVS_ENABLE		BIT(30)
+#define	 ARMADA_37XX_AVS_HIGH_VDD_LIMIT	16
+#define	 ARMADA_37XX_AVS_LOW_VDD_LIMIT	22
+#define	 ARMADA_37XX_AVS_VDD_MASK	0x3F
+#define ARMADA_37XX_AVS_CTL2		0x8
+#define	 ARMADA_37XX_AVS_LOW_VDD_EN	BIT(6)
+#define ARMADA_37XX_AVS_VSET(x)	    (0x1C + 4 * (x))
+
 /*
  * On Armada 37xx the Power management manages 4 level of CPU load,
  * each level can be associated with a CPU clock source, a CPU
@@ -58,6 +68,17 @@
  */
 #define LOAD_LEVEL_NR	4
 
+#define MIN_VOLT_MV 1000
+
+/*  AVS value for the corresponding voltage (in mV) */
+static int avs_map[] = {
+	747, 758, 770, 782, 793, 805, 817, 828, 840, 852, 863, 875, 887, 898,
+	910, 922, 933, 945, 957, 968, 980, 992, 1003, 1015, 1027, 1038, 1050,
+	1062, 1073, 1085, 1097, 1108, 1120, 1132, 1143, 1155, 1167, 1178, 1190,
+	1202, 1213, 1225, 1237, 1248, 1260, 1272, 1283, 1295, 1307, 1318, 1330,
+	1342
+};
+
 struct armada37xx_cpufreq_state {
 	struct regmap *regmap;
 	u32 nb_l0l1;
@@ -71,6 +92,7 @@ static struct armada37xx_cpufreq_state *armada37xx_cpufreq_state;
 struct armada_37xx_dvfs {
 	u32 cpu_freq_max;
 	u8 divider[LOAD_LEVEL_NR];
+	u32 avs[LOAD_LEVEL_NR];
 };
 
 static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
@@ -148,6 +170,128 @@ static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
 	clk_set_parent(clk, parent);
 }
 
+/*
+ * Find out the armada 37x supported AVS value whose voltage value is
+ * the round-up closest to the target voltage value.
+ */
+static u32 armada_37xx_avs_val_match(int target_vm)
+{
+	u32 avs;
+
+	/* Find out the round-up closest supported voltage value */
+	for (avs = 0; avs < ARRAY_SIZE(avs_map); avs++)
+		if (avs_map[avs] >= target_vm)
+			break;
+
+	/*
+	 * If all supported voltages are smaller than target one,
+	 * choose the largest supported voltage
+	 */
+	if (avs == ARRAY_SIZE(avs_map))
+		avs = ARRAY_SIZE(avs_map) - 1;
+
+	return avs;
+}
+
+/*
+ * For Armada 37xx soc, L0(VSET0) VDD AVS value is set to SVC revision
+ * value or a default value when SVC is not supported.
+ * - L0 can be read out from the register of AVS_CTRL_0 and L0 voltage
+ *   can be got from the mapping table of avs_map.
+ * - L1 voltage should be about 100mv smaller than L0 voltage
+ * - L2 & L3 voltage should be about 150mv smaller than L0 voltage.
+ * This function calculates L1 & L2 & L3 AVS values dynamically based
+ * on L0 voltage and fill all AVS values to the AVS value table.
+ */
+static void __init armada37xx_cpufreq_avs_configure(struct regmap *base,
+						struct armada_37xx_dvfs *dvfs)
+{
+	unsigned int target_vm;
+	int load_level = 0;
+	u32 l0_vdd_min;
+
+	if (base == NULL)
+		return;
+
+	/* Get L0 VDD min value */
+	regmap_read(base, ARMADA_37XX_AVS_CTL0, &l0_vdd_min);
+	l0_vdd_min = (l0_vdd_min >> ARMADA_37XX_AVS_LOW_VDD_LIMIT) &
+		ARMADA_37XX_AVS_VDD_MASK;
+	if (l0_vdd_min >= ARRAY_SIZE(avs_map))  {
+		pr_err("L0 VDD MIN %d is not correct.\n", l0_vdd_min);
+		return;
+	}
+	dvfs->avs[0] = l0_vdd_min;
+
+	if (avs_map[l0_vdd_min] <= MIN_VOLT_MV) {
+		/*
+		 * If L0 voltage is smaller than 1000mv, then all VDD sets
+		 * use L0 voltage;
+		 */
+		u32 avs_min = armada_37xx_avs_val_match(MIN_VOLT_MV);
+
+		for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++)
+			dvfs->avs[load_level] = avs_min;
+
+		return;
+	}
+
+	/*
+	 * L1 voltage is equal to L0 voltage - 100mv and it must be
+	 * larger than 1000mv
+	 */
+
+	target_vm = avs_map[l0_vdd_min] - 100;
+	target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
+	dvfs->avs[1] = armada_37xx_avs_val_match(target_vm);
+
+	/*
+	 * L2 & L3 voltage is equal to L0 voltage - 150mv and it must
+	 * be larger than 1000mv
+	 */
+	target_vm = avs_map[l0_vdd_min] - 150;
+	target_vm = target_vm > MIN_VOLT_MV ? target_vm : MIN_VOLT_MV;
+	dvfs->avs[2] = dvfs->avs[3] = armada_37xx_avs_val_match(target_vm);
+}
+
+static void __init armada37xx_cpufreq_avs_setup(struct regmap *base,
+						struct armada_37xx_dvfs *dvfs)
+{
+	unsigned int avs_val = 0, freq;
+	int load_level = 0;
+
+	if (base == NULL)
+		return;
+
+	/* Disable AVS before the configuration */
+	regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
+			   ARMADA_37XX_AVS_ENABLE, 0);
+
+
+	/* Enable low voltage mode */
+	regmap_update_bits(base, ARMADA_37XX_AVS_CTL2,
+			   ARMADA_37XX_AVS_LOW_VDD_EN,
+			   ARMADA_37XX_AVS_LOW_VDD_EN);
+
+
+	for (load_level = 1; load_level < LOAD_LEVEL_NR; load_level++) {
+		freq = dvfs->cpu_freq_max / dvfs->divider[load_level];
+
+		avs_val = dvfs->avs[load_level];
+		regmap_update_bits(base, ARMADA_37XX_AVS_VSET(load_level-1),
+		    ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
+		    ARMADA_37XX_AVS_VDD_MASK << ARMADA_37XX_AVS_LOW_VDD_LIMIT,
+		    avs_val << ARMADA_37XX_AVS_HIGH_VDD_LIMIT |
+		    avs_val << ARMADA_37XX_AVS_LOW_VDD_LIMIT);
+	}
+
+	/* Enable AVS after the configuration */
+	regmap_update_bits(base, ARMADA_37XX_AVS_CTL0,
+			   ARMADA_37XX_AVS_ENABLE,
+			   ARMADA_37XX_AVS_ENABLE);
+
+}
+
 static void armada37xx_cpufreq_disable_dvfs(struct regmap *base)
 {
 	unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
@@ -216,7 +360,7 @@ static int __init armada37xx_cpufreq_driver_init(void)
 	struct platform_device *pdev;
 	unsigned long freq;
 	unsigned int cur_frequency;
-	struct regmap *nb_pm_base;
+	struct regmap *nb_pm_base, *avs_base;
 	struct device *cpu_dev;
 	int load_lvl, ret;
 	struct clk *clk;
@@ -227,6 +371,14 @@ static int __init armada37xx_cpufreq_driver_init(void)
 	if (IS_ERR(nb_pm_base))
 		return -ENODEV;
 
+	avs_base =
+		syscon_regmap_lookup_by_compatible("marvell,armada-3700-avs");
+
+	/* if AVS is not present don't use it but still try to setup dvfs */
+	if (IS_ERR(avs_base)) {
+		pr_info("Syscon failed for Adapting Voltage Scaling: skip it\n");
+		avs_base = NULL;
+	}
 	/* Before doing any configuration on the DVFS first, disable it */
 	armada37xx_cpufreq_disable_dvfs(nb_pm_base);
 
@@ -270,16 +422,21 @@ static int __init armada37xx_cpufreq_driver_init(void)
 
 	armada37xx_cpufreq_state->regmap = nb_pm_base;
 
+	armada37xx_cpufreq_avs_configure(avs_base, dvfs);
+	armada37xx_cpufreq_avs_setup(avs_base, dvfs);
+
 	armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
 	clk_put(clk);
 
 	for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
 	     load_lvl++) {
+		unsigned long u_volt = avs_map[dvfs->avs[load_lvl]] * 1000;
 		freq = cur_frequency / dvfs->divider[load_lvl];
-
-		ret = dev_pm_opp_add(cpu_dev, freq, 0);
+		ret = dev_pm_opp_add(cpu_dev, freq, u_volt);
 		if (ret)
 			goto remove_opp;
+
+
 	}
 
 	/* Now that everything is setup, enable the DVFS at hardware level */

drivers/cpufreq/cppc_cpufreq.c

@@ -296,10 +296,62 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	return ret;
 }
 
+static inline u64 get_delta(u64 t1, u64 t0)
+{
+	if (t1 > t0 || t0 > ~(u32)0)
+		return t1 - t0;
+
+	return (u32)t1 - (u32)t0;
+}
+
+static int cppc_get_rate_from_fbctrs(struct cppc_cpudata *cpu,
+				     struct cppc_perf_fb_ctrs fb_ctrs_t0,
+				     struct cppc_perf_fb_ctrs fb_ctrs_t1)
+{
+	u64 delta_reference, delta_delivered;
+	u64 reference_perf, delivered_perf;
+
+	reference_perf = fb_ctrs_t0.reference_perf;
+
+	delta_reference = get_delta(fb_ctrs_t1.reference,
+				    fb_ctrs_t0.reference);
+	delta_delivered = get_delta(fb_ctrs_t1.delivered,
+				    fb_ctrs_t0.delivered);
+
+	/* Check to avoid divide-by zero */
+	if (delta_reference || delta_delivered)
+		delivered_perf = (reference_perf * delta_delivered) /
+					delta_reference;
+	else
+		delivered_perf = cpu->perf_ctrls.desired_perf;
+
+	return cppc_cpufreq_perf_to_khz(cpu, delivered_perf);
+}
+
+static unsigned int cppc_cpufreq_get_rate(unsigned int cpunum)
+{
+	struct cppc_perf_fb_ctrs fb_ctrs_t0 = {0}, fb_ctrs_t1 = {0};
+	struct cppc_cpudata *cpu = all_cpu_data[cpunum];
+	int ret;
+
+	ret = cppc_get_perf_ctrs(cpunum, &fb_ctrs_t0);
+	if (ret)
+		return ret;
+
+	udelay(2); /* 2usec delay between sampling */
+
+	ret = cppc_get_perf_ctrs(cpunum, &fb_ctrs_t1);
+	if (ret)
+		return ret;
+
+	return cppc_get_rate_from_fbctrs(cpu, fb_ctrs_t0, fb_ctrs_t1);
+}
+
 static struct cpufreq_driver cppc_cpufreq_driver = {
 	.flags = CPUFREQ_CONST_LOOPS,
 	.verify = cppc_verify_policy,
 	.target = cppc_cpufreq_set_target,
+	.get = cppc_cpufreq_get_rate,
 	.init = cppc_cpufreq_cpu_init,
 	.stop_cpu = cppc_cpufreq_stop_cpu,
 	.name = "cppc_cpufreq",

drivers/cpufreq/cpufreq.c

@@ -923,7 +923,12 @@ static ssize_t store(struct kobject *kobj, struct attribute *attr,
 	struct freq_attr *fattr = to_attr(attr);
 	ssize_t ret = -EINVAL;
 
-	cpus_read_lock();
+	/*
+	 * cpus_read_trylock() is used here to work around a circular lock
+	 * dependency problem with respect to the cpufreq_register_driver().
+	 */
+	if (!cpus_read_trylock())
+		return -EBUSY;
 
 	if (cpu_online(policy->cpu)) {
 		down_write(&policy->rwsem);
@@ -2236,6 +2241,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
 
 	policy->min = new_policy->min;
 	policy->max = new_policy->max;
+	trace_cpu_frequency_limits(policy);
 
 	policy->cached_target_freq = UINT_MAX;
 

drivers/cpufreq/imx6q-cpufreq.c

@@ -9,6 +9,7 @@
 #include <linux/clk.h>
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
+#include <linux/cpu_cooling.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -50,6 +51,7 @@ static struct clk_bulk_data clks[] = {
 };
 
 static struct device *cpu_dev;
+static struct thermal_cooling_device *cdev;
 static bool free_opp;
 static struct cpufreq_frequency_table *freq_table;
 static unsigned int max_freq;
@@ -191,6 +193,16 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 	return 0;
 }
 
+static void imx6q_cpufreq_ready(struct cpufreq_policy *policy)
+{
+	cdev = of_cpufreq_cooling_register(policy);
+
+	if (!cdev)
+		dev_err(cpu_dev,
+			"running cpufreq without cooling device: %ld\n",
+			PTR_ERR(cdev));
+}
+
 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int ret;
@@ -202,13 +214,22 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 	return ret;
 }
 
+static int imx6q_cpufreq_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_cooling_unregister(cdev);
+
+	return 0;
+}
+
 static struct cpufreq_driver imx6q_cpufreq_driver = {
 	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = imx6q_set_target,
 	.get = cpufreq_generic_get,
 	.init = imx6q_cpufreq_init,
+	.exit = imx6q_cpufreq_exit,
 	.name = "imx6q-cpufreq",
+	.ready = imx6q_cpufreq_ready,
 	.attr = cpufreq_generic_attr,
 	.suspend = cpufreq_generic_suspend,
 };

drivers/cpufreq/intel_pstate.c

@@ -670,21 +670,18 @@ static ssize_t store_energy_performance_preference(
 {
 	struct cpudata *cpu_data = all_cpu_data[policy->cpu];
 	char str_preference[21];
-	int ret, i = 0;
+	int ret;
 
 	ret = sscanf(buf, "%20s", str_preference);
 	if (ret != 1)
 		return -EINVAL;
 
-	while (energy_perf_strings[i] != NULL) {
-		if (!strcmp(str_preference, energy_perf_strings[i])) {
-			intel_pstate_set_energy_pref_index(cpu_data, i);
-			return count;
-		}
-		++i;
-	}
+	ret = match_string(energy_perf_strings, -1, str_preference);
+	if (ret < 0)
+		return ret;
 
-	return -EINVAL;
+	intel_pstate_set_energy_pref_index(cpu_data, ret);
+	return count;
 }
 
 static ssize_t show_energy_performance_preference(
@@ -2011,7 +2008,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
 static void intel_pstate_adjust_policy_max(struct cpufreq_policy *policy,
 					 struct cpudata *cpu)
 {
-	if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate &&
+	if (!hwp_active &&
+	    cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate &&
 	    policy->max < policy->cpuinfo.max_freq &&
 	    policy->max > cpu->pstate.max_freq) {
 		pr_debug("policy->max > max non turbo frequency\n");
@@ -2085,6 +2083,15 @@ static int __intel_pstate_cpu_init(struct cpufreq_policy *policy)
 			cpu->pstate.max_pstate : cpu->pstate.turbo_pstate;
 	policy->cpuinfo.max_freq *= cpu->pstate.scaling;
 
+	if (hwp_active) {
+		unsigned int max_freq;
+
+		max_freq = global.turbo_disabled ?
+			cpu->pstate.max_freq : cpu->pstate.turbo_freq;
+		if (max_freq < policy->cpuinfo.max_freq)
+			policy->cpuinfo.max_freq = max_freq;
+	}
+
 	intel_pstate_init_acpi_perf_limits(policy);
 
 	policy->fast_switch_possible = true;

drivers/cpufreq/pcc-cpufreq.c

@@ -593,6 +593,15 @@ static int __init pcc_cpufreq_init(void)
 		return ret;
 	}
 
+	if (num_present_cpus() > 4) {
+		pcc_cpufreq_driver.flags |= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING;
+		pr_err("%s: Too many CPUs, dynamic performance scaling disabled\n",
+		       __func__);
+		pr_err("%s: Try to enable another scaling driver through BIOS settings\n",
+		       __func__);
+		pr_err("%s: and complain to the system vendor\n", __func__);
+	}
+
 	ret = cpufreq_register_driver(&pcc_cpufreq_driver);
 
 	return ret;

drivers/cpufreq/qcom-cpufreq-kryo.c

@@ -109,6 +109,7 @@ static int qcom_cpufreq_kryo_probe(struct platform_device *pdev)
 	speedbin_nvmem = of_nvmem_cell_get(np, NULL);
 	of_node_put(np);
 	if (IS_ERR(speedbin_nvmem)) {
+		if (PTR_ERR(speedbin_nvmem) != -EPROBE_DEFER)
 			dev_err(cpu_dev, "Could not get nvmem cell: %ld\n",
 				PTR_ERR(speedbin_nvmem));
 		return PTR_ERR(speedbin_nvmem);

drivers/cpuidle/cpuidle-arm.c

@@ -105,6 +105,7 @@ static int __init arm_idle_init_cpu(int cpu)
 
 	ret = cpuidle_register_driver(drv);
 	if (ret) {
+		if (ret != -EBUSY)
 			pr_err("Failed to register cpuidle driver\n");
 		goto out_kfree_drv;
 	}

drivers/devfreq/devfreq.c

@@ -604,28 +604,29 @@ struct devfreq *devfreq_add_device(struct device *dev,
 		mutex_lock(&devfreq->lock);
 	}
 
-	devfreq->min_freq = find_available_min_freq(devfreq);
-	if (!devfreq->min_freq) {
+	devfreq->scaling_min_freq = find_available_min_freq(devfreq);
+	if (!devfreq->scaling_min_freq) {
 		mutex_unlock(&devfreq->lock);
 		err = -EINVAL;
 		goto err_dev;
 	}
-	devfreq->scaling_min_freq = devfreq->min_freq;
+	devfreq->min_freq = devfreq->scaling_min_freq;
 
-	devfreq->max_freq = find_available_max_freq(devfreq);
-	if (!devfreq->max_freq) {
+	devfreq->scaling_max_freq = find_available_max_freq(devfreq);
+	if (!devfreq->scaling_max_freq) {
 		mutex_unlock(&devfreq->lock);
 		err = -EINVAL;
 		goto err_dev;
 	}
-	devfreq->scaling_max_freq = devfreq->max_freq;
+	devfreq->max_freq = devfreq->scaling_max_freq;
 
 	dev_set_name(&devfreq->dev, "devfreq%d",
 				atomic_inc_return(&devfreq_no));
 	err = device_register(&devfreq->dev);
 	if (err) {
 		mutex_unlock(&devfreq->lock);
-		goto err_dev;
+		put_device(&devfreq->dev);
+		goto err_out;
 	}
 
 	devfreq->trans_table =
@@ -672,6 +673,7 @@ struct devfreq *devfreq_add_device(struct device *dev,
 	mutex_unlock(&devfreq_list_lock);
 
 	device_unregister(&devfreq->dev);
+	devfreq = NULL;
 err_dev:
 	if (devfreq)
 		kfree(devfreq);

drivers/devfreq/event/exynos-ppmu.c

@@ -627,11 +627,9 @@ static int exynos_ppmu_probe(struct platform_device *pdev)
 
 	size = sizeof(struct devfreq_event_dev *) * info->num_events;
 	info->edev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
-	if (!info->edev) {
-		dev_err(&pdev->dev,
-			"failed to allocate memory devfreq-event devices\n");
+	if (!info->edev)
 		return -ENOMEM;
-	}
+
 	edev = info->edev;
 	platform_set_drvdata(pdev, info);
 

drivers/devfreq/rk3399_dmc.c

@@ -68,15 +68,6 @@ struct rk3399_dmcfreq {
 	struct devfreq_event_dev *edev;
 	struct mutex lock;
 	struct dram_timing timing;
-
-	/*
-	 * DDR Converser of Frequency (DCF) is used to implement DDR frequency
-	 * conversion without the participation of CPU, we will implement and
-	 * control it in arm trust firmware.
-	 */
-	wait_queue_head_t	wait_dcf_queue;
-	int irq;
-	int wait_dcf_flag;
 	struct regulator *vdd_center;
 	unsigned long rate, target_rate;
 	unsigned long volt, target_volt;
@@ -112,30 +103,21 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 		err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
 					    target_volt);
 		if (err) {
-			dev_err(dev, "Cannot to set voltage %lu uV\n",
+			dev_err(dev, "Cannot set voltage %lu uV\n",
 				target_volt);
 			goto out;
 		}
 	}
-	dmcfreq->wait_dcf_flag = 1;
 
 	err = clk_set_rate(dmcfreq->dmc_clk, target_rate);
 	if (err) {
-		dev_err(dev, "Cannot to set frequency %lu (%d)\n",
-			target_rate, err);
+		dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
+			err);
 		regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
 				      dmcfreq->volt);
 		goto out;
 	}
 
-	/*
-	 * Wait until bcf irq happen, it means freq scaling finish in
-	 * arm trust firmware, use 100ms as timeout time.
-	 */
-	if (!wait_event_timeout(dmcfreq->wait_dcf_queue,
-				!dmcfreq->wait_dcf_flag, HZ / 10))
-		dev_warn(dev, "Timeout waiting for dcf interrupt\n");
-
 	/*
 	 * Check the dpll rate,
 	 * There only two result we will get,
@@ -146,8 +128,8 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 
 	/* If get the incorrect rate, set voltage to old value. */
 	if (dmcfreq->rate != target_rate) {
-		dev_err(dev, "Get wrong ddr frequency, Request frequency %lu,\
-			Current frequency %lu\n", target_rate, dmcfreq->rate);
+		dev_err(dev, "Got wrong frequency, Request %lu, Current %lu\n",
+			target_rate, dmcfreq->rate);
 		regulator_set_voltage(dmcfreq->vdd_center, dmcfreq->volt,
 				      dmcfreq->volt);
 		goto out;
@@ -155,7 +137,7 @@ static int rk3399_dmcfreq_target(struct device *dev, unsigned long *freq,
 		err = regulator_set_voltage(dmcfreq->vdd_center, target_volt,
 					    target_volt);
 	if (err)
-		dev_err(dev, "Cannot to set vol %lu uV\n", target_volt);
+		dev_err(dev, "Cannot set voltage %lu uV\n", target_volt);
 
 	dmcfreq->rate = target_rate;
 	dmcfreq->volt = target_volt;
@@ -241,22 +223,6 @@ static __maybe_unused int rk3399_dmcfreq_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(rk3399_dmcfreq_pm, rk3399_dmcfreq_suspend,
 			 rk3399_dmcfreq_resume);
 
-static irqreturn_t rk3399_dmc_irq(int irq, void *dev_id)
-{
-	struct rk3399_dmcfreq *dmcfreq = dev_id;
-	struct arm_smccc_res res;
-
-	dmcfreq->wait_dcf_flag = 0;
-	wake_up(&dmcfreq->wait_dcf_queue);
-
-	/* Clear the DCF interrupt */
-	arm_smccc_smc(ROCKCHIP_SIP_DRAM_FREQ, 0, 0,
-		      ROCKCHIP_SIP_CONFIG_DRAM_CLR_IRQ,
-		      0, 0, 0, 0, &res);
-
-	return IRQ_HANDLED;
-}
-
 static int of_get_ddr_timings(struct dram_timing *timing,
 			      struct device_node *np)
 {
@@ -330,16 +296,10 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct device_node *np = pdev->dev.of_node;
 	struct rk3399_dmcfreq *data;
-	int ret, irq, index, size;
+	int ret, index, size;
 	uint32_t *timing;
 	struct dev_pm_opp *opp;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		dev_err(&pdev->dev,
-			"Cannot get the dmc interrupt resource: %d\n", irq);
-		return irq;
-	}
 	data = devm_kzalloc(dev, sizeof(struct rk3399_dmcfreq), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
@@ -348,27 +308,22 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 
 	data->vdd_center = devm_regulator_get(dev, "center");
 	if (IS_ERR(data->vdd_center)) {
+		if (PTR_ERR(data->vdd_center) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
 		dev_err(dev, "Cannot get the regulator \"center\"\n");
 		return PTR_ERR(data->vdd_center);
 	}
 
 	data->dmc_clk = devm_clk_get(dev, "dmc_clk");
 	if (IS_ERR(data->dmc_clk)) {
+		if (PTR_ERR(data->dmc_clk) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+
 		dev_err(dev, "Cannot get the clk dmc_clk\n");
 		return PTR_ERR(data->dmc_clk);
 	};
 
-	data->irq = irq;
-	ret = devm_request_irq(dev, irq, rk3399_dmc_irq, 0,
-			       dev_name(dev), data);
-	if (ret) {
-		dev_err(dev, "Failed to request dmc irq: %d\n", ret);
-		return ret;
-	}
-
-	init_waitqueue_head(&data->wait_dcf_queue);
-	data->wait_dcf_flag = 0;
-
 	data->edev = devfreq_event_get_edev_by_phandle(dev, 0);
 	if (IS_ERR(data->edev))
 		return -EPROBE_DEFER;
@@ -420,8 +375,10 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 	data->rate = clk_get_rate(data->dmc_clk);
 
 	opp = devfreq_recommended_opp(dev, &data->rate, 0);
-	if (IS_ERR(opp))
-		return PTR_ERR(opp);
+	if (IS_ERR(opp)) {
+		ret = PTR_ERR(opp);
+		goto err_free_opp;
+	}
 
 	data->rate = dev_pm_opp_get_freq(opp);
 	data->volt = dev_pm_opp_get_voltage(opp);
@@ -433,13 +390,33 @@ static int rk3399_dmcfreq_probe(struct platform_device *pdev)
 					   &rk3399_devfreq_dmc_profile,
 					   DEVFREQ_GOV_SIMPLE_ONDEMAND,
 					   &data->ondemand_data);
-	if (IS_ERR(data->devfreq))
-		return PTR_ERR(data->devfreq);
+	if (IS_ERR(data->devfreq)) {
+		ret = PTR_ERR(data->devfreq);
+		goto err_free_opp;
+	}
+
 	devm_devfreq_register_opp_notifier(dev, data->devfreq);
 
 	data->dev = dev;
 	platform_set_drvdata(pdev, data);
 
+	return 0;
+
+err_free_opp:
+	dev_pm_opp_of_remove_table(&pdev->dev);
+	return ret;
+}
+
+static int rk3399_dmcfreq_remove(struct platform_device *pdev)
+{
+	struct rk3399_dmcfreq *dmcfreq = dev_get_drvdata(&pdev->dev);
+
+	/*
+	 * Before remove the opp table we need to unregister the opp notifier.
+	 */
+	devm_devfreq_unregister_opp_notifier(dmcfreq->dev, dmcfreq->devfreq);
+	dev_pm_opp_of_remove_table(dmcfreq->dev);
+
 	return 0;
 }
 
@@ -451,6 +428,7 @@ MODULE_DEVICE_TABLE(of, rk3399dmc_devfreq_of_match);
 
 static struct platform_driver rk3399_dmcfreq_driver = {
 	.probe	= rk3399_dmcfreq_probe,
+	.remove = rk3399_dmcfreq_remove,
 	.driver = {
 		.name	= "rk3399-dmc-freq",
 		.pm	= &rk3399_dmcfreq_pm,

drivers/gpu/drm/tegra/dc.c

@@ -2312,7 +2312,7 @@ static int tegra_dc_couple(struct tegra_dc *dc)
 	 * POWER_CONTROL registers during CRTC enabling.
 	 */
 	if (dc->soc->coupled_pm && dc->pipe == 1) {
-		u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE;
+		u32 flags = DL_FLAG_PM_RUNTIME | DL_FLAG_AUTOREMOVE_CONSUMER;
 		struct device_link *link;
 		struct device *partner;
 

drivers/gpu/ipu-v3/ipu-pre.c

@@ -128,7 +128,8 @@ ipu_pre_lookup_by_phandle(struct device *dev, const char *name, int index)
 	list_for_each_entry(pre, &ipu_pre_list, list) {
 		if (pre_node == pre->dev->of_node) {
 			mutex_unlock(&ipu_pre_list_mutex);
-			device_link_add(dev, pre->dev, DL_FLAG_AUTOREMOVE);
+			device_link_add(dev, pre->dev,
+					DL_FLAG_AUTOREMOVE_CONSUMER);
 			of_node_put(pre_node);
 			return pre;
 		}

drivers/gpu/ipu-v3/ipu-prg.c

@@ -100,7 +100,8 @@ ipu_prg_lookup_by_phandle(struct device *dev, const char *name, int ipu_id)
 	list_for_each_entry(prg, &ipu_prg_list, list) {
 		if (prg_node == prg->dev->of_node) {
 			mutex_unlock(&ipu_prg_list_mutex);
-			device_link_add(dev, prg->dev, DL_FLAG_AUTOREMOVE);
+			device_link_add(dev, prg->dev,
+					DL_FLAG_AUTOREMOVE_CONSUMER);
 			prg->id = ipu_id;
 			of_node_put(prg_node);
 			return prg;

drivers/powercap/Kconfig

@@ -29,4 +29,14 @@ config INTEL_RAPL
 	  controller, CPU core (Power Plance 0), graphics uncore (Power Plane
 	  1), etc.
 
+config IDLE_INJECT
+	bool "Idle injection framework"
+	depends on CPU_IDLE
+	default n
+	help
+	  This enables support for the idle injection framework. It
+	  provides a way to force idle periods on a set of specified
+	  CPUs for power capping. Idle period can be injected
+	  synchronously on a set of specified CPUs or alternatively
+	  on a per CPU basis.
 endif

drivers/powercap/Makefile

 obj-$(CONFIG_POWERCAP)	+= powercap_sys.o
 obj-$(CONFIG_INTEL_RAPL) += intel_rapl.o
+obj-$(CONFIG_IDLE_INJECT) += idle_inject.o

drivers/soc/imx/gpc.c

@@ -209,7 +209,7 @@ static int imx_pgc_power_domain_probe(struct platform_device *pdev)
 			goto genpd_err;
 	}
 
-	device_link_add(dev, dev->parent, DL_FLAG_AUTOREMOVE);
+	device_link_add(dev, dev->parent, DL_FLAG_AUTOREMOVE_CONSUMER);
 
 	return 0;
 

drivers/thermal/imx_thermal.c

@@ -3,6 +3,7 @@
 // Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <linux/clk.h>
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpu_cooling.h>
 #include <linux/delay.h>
@@ -644,6 +645,27 @@ static const struct of_device_id of_imx_thermal_match[] = {
 };
 MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
 
+/*
+ * Create cooling device in case no #cooling-cells property is available in
+ * CPU node
+ */
+static int imx_thermal_register_legacy_cooling(struct imx_thermal_data *data)
+{
+	struct device_node *np = of_get_cpu_node(data->policy->cpu, NULL);
+	int ret;
+
+	if (!np || !of_find_property(np, "#cooling-cells", NULL)) {
+		data->cdev = cpufreq_cooling_register(data->policy);
+		if (IS_ERR(data->cdev)) {
+			ret = PTR_ERR(data->cdev);
+			cpufreq_cpu_put(data->policy);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
 static int imx_thermal_probe(struct platform_device *pdev)
 {
 	struct imx_thermal_data *data;
@@ -724,12 +746,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
 		return -EPROBE_DEFER;
 	}
 
-	data->cdev = cpufreq_cooling_register(data->policy);
-	if (IS_ERR(data->cdev)) {
-		ret = PTR_ERR(data->cdev);
+	ret = imx_thermal_register_legacy_cooling(data);
+	if (ret) {
 		dev_err(&pdev->dev,
 			"failed to register cpufreq cooling device: %d\n", ret);
-		cpufreq_cpu_put(data->policy);
 		return ret;
 	}
 

include/dt-bindings/clock/rk3399-ddr.h

+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_DDR_H
+#define DT_BINDINGS_DDR_H
+
+/*
+ * DDR3 SDRAM Standard Speed Bins include tCK, tRCD, tRP, tRAS and tRC for
+ * each corresponding bin.
+ */
+
+/* DDR3-800 (5-5-5) */
+#define DDR3_800D	0
+/* DDR3-800 (6-6-6) */
+#define DDR3_800E	1
+/* DDR3-1066 (6-6-6) */
+#define DDR3_1066E	2
+/* DDR3-1066 (7-7-7) */
+#define DDR3_1066F	3
+/* DDR3-1066 (8-8-8) */
+#define DDR3_1066G	4
+/* DDR3-1333 (7-7-7) */
+#define DDR3_1333F	5
+/* DDR3-1333 (8-8-8) */
+#define DDR3_1333G	6
+/* DDR3-1333 (9-9-9) */
+#define DDR3_1333H	7
+/* DDR3-1333 (10-10-10) */
+#define DDR3_1333J 	8
+/* DDR3-1600 (8-8-8) */
+#define DDR3_1600G	9
+/* DDR3-1600 (9-9-9) */
+#define DDR3_1600H	10
+/* DDR3-1600 (10-10-10) */
+#define DDR3_1600J	11
+/* DDR3-1600 (11-11-11) */
+#define DDR3_1600K	12
+/* DDR3-1600 (10-10-10) */
+#define DDR3_1866J	13
+/* DDR3-1866 (11-11-11) */
+#define DDR3_1866K	14
+/* DDR3-1866 (12-12-12) */
+#define DDR3_1866L	15
+/* DDR3-1866 (13-13-13) */
+#define DDR3_1866M	16
+/* DDR3-2133 (11-11-11) */
+#define DDR3_2133K	17
+/* DDR3-2133 (12-12-12) */
+#define DDR3_2133L	18
+/* DDR3-2133 (13-13-13) */
+#define DDR3_2133M	19
+/* DDR3-2133 (14-14-14) */
+#define DDR3_2133N	20
+/* DDR3 ATF default */
+#define DDR3_DEFAULT	21
+
+#endif

include/linux/cpu.h

@@ -105,6 +105,7 @@ extern void cpus_write_lock(void);
 extern void cpus_write_unlock(void);
 extern void cpus_read_lock(void);
 extern void cpus_read_unlock(void);
+extern int  cpus_read_trylock(void);
 extern void lockdep_assert_cpus_held(void);
 extern void cpu_hotplug_disable(void);
 extern void cpu_hotplug_enable(void);
@@ -117,6 +118,7 @@ static inline void cpus_write_lock(void) { }
 static inline void cpus_write_unlock(void) { }
 static inline void cpus_read_lock(void) { }
 static inline void cpus_read_unlock(void) { }
+static inline int  cpus_read_trylock(void) { return true; }
 static inline void lockdep_assert_cpus_held(void) { }
 static inline void cpu_hotplug_disable(void) { }
 static inline void cpu_hotplug_enable(void) { }

include/linux/device.h

@@ -90,7 +90,7 @@ extern void bus_remove_file(struct bus_type *, struct bus_attribute *);
  * @num_vf:	Called to find out how many virtual functions a device on this
  *		bus supports.
  * @dma_configure:	Called to setup DMA configuration on a device on
-			this bus.
+ *			this bus.
  * @pm:		Power management operations of this bus, callback the specific
  *		device driver's pm-ops.
  * @iommu_ops:  IOMMU specific operations for this bus, used to attach IOMMU
@@ -784,14 +784,16 @@ enum device_link_state {
  * Device link flags.
  *
  * STATELESS: The core won't track the presence of supplier/consumer drivers.
- * AUTOREMOVE: Remove this link automatically on consumer driver unbind.
+ * AUTOREMOVE_CONSUMER: Remove the link automatically on consumer driver unbind.
  * PM_RUNTIME: If set, the runtime PM framework will use this link.
  * RPM_ACTIVE: Run pm_runtime_get_sync() on the supplier during link creation.
+ * AUTOREMOVE_SUPPLIER: Remove the link automatically on supplier driver unbind.
  */
 #define DL_FLAG_STATELESS		BIT(0)
-#define DL_FLAG_AUTOREMOVE	BIT(1)
+#define DL_FLAG_AUTOREMOVE_CONSUMER	BIT(1)
 #define DL_FLAG_PM_RUNTIME		BIT(2)
 #define DL_FLAG_RPM_ACTIVE		BIT(3)
+#define DL_FLAG_AUTOREMOVE_SUPPLIER	BIT(4)
 
 /**
  * struct device_link - Device link representation.

include/linux/idle_inject.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 Linaro Ltd
+ *
+ * Author: Daniel Lezcano <daniel.lezcano@linaro.org>
+ *
+ */
+#ifndef __IDLE_INJECT_H__
+#define __IDLE_INJECT_H__
+
+/* private idle injection device structure */
+struct idle_inject_device;
+
+struct idle_inject_device *idle_inject_register(struct cpumask *cpumask);
+
+void idle_inject_unregister(struct idle_inject_device *ii_dev);
+
+int idle_inject_start(struct idle_inject_device *ii_dev);
+
+void idle_inject_stop(struct idle_inject_device *ii_dev);
+
+void idle_inject_set_duration(struct idle_inject_device *ii_dev,
+				 unsigned int run_duration_ms,
+				 unsigned int idle_duration_ms);
+
+void idle_inject_get_duration(struct idle_inject_device *ii_dev,
+				 unsigned int *run_duration_ms,
+				 unsigned int *idle_duration_ms);
+#endif /* __IDLE_INJECT_H__ */

include/linux/pm_domain.h

@@ -239,6 +239,8 @@ unsigned int of_genpd_opp_to_performance_state(struct device *dev,
 int genpd_dev_pm_attach(struct device *dev);
 struct device *genpd_dev_pm_attach_by_id(struct device *dev,
 					 unsigned int index);
+struct device *genpd_dev_pm_attach_by_name(struct device *dev,
+					   char *name);
 #else /* !CONFIG_PM_GENERIC_DOMAINS_OF */
 static inline int of_genpd_add_provider_simple(struct device_node *np,
 					struct generic_pm_domain *genpd)
@@ -290,6 +292,12 @@ static inline struct device *genpd_dev_pm_attach_by_id(struct device *dev,
 	return NULL;
 }
 
+static inline struct device *genpd_dev_pm_attach_by_name(struct device *dev,
+							 char *name)
+{
+	return NULL;
+}
+
 static inline
 struct generic_pm_domain *of_genpd_remove_last(struct device_node *np)
 {
@@ -301,6 +309,8 @@ struct generic_pm_domain *of_genpd_remove_last(struct device_node *np)
 int dev_pm_domain_attach(struct device *dev, bool power_on);
 struct device *dev_pm_domain_attach_by_id(struct device *dev,
 					  unsigned int index);
+struct device *dev_pm_domain_attach_by_name(struct device *dev,
+					    char *name);
 void dev_pm_domain_detach(struct device *dev, bool power_off);
 void dev_pm_domain_set(struct device *dev, struct dev_pm_domain *pd);
 #else
@@ -313,6 +323,11 @@ static inline struct device *dev_pm_domain_attach_by_id(struct device *dev,
 {
 	return NULL;
 }
+static inline struct device *dev_pm_domain_attach_by_name(struct device *dev,
+							  char *name)
+{
+	return NULL;
+}
 static inline void dev_pm_domain_detach(struct device *dev, bool power_off) {}
 static inline void dev_pm_domain_set(struct device *dev,
 				     struct dev_pm_domain *pd) {}

include/linux/suspend.h

@@ -414,7 +414,7 @@ static inline bool hibernation_available(void) { return false; }
 #define PM_RESTORE_PREPARE	0x0005 /* Going to restore a saved image */
 #define PM_POST_RESTORE		0x0006 /* Restore failed */
 
-extern struct mutex pm_mutex;
+extern struct mutex system_transition_mutex;
 
 #ifdef CONFIG_PM_SLEEP
 void save_processor_state(void);

include/trace/events/power.h

@@ -5,6 +5,7 @@
 #if !defined(_TRACE_POWER_H) || defined(TRACE_HEADER_MULTI_READ)
 #define _TRACE_POWER_H
 
+#include <linux/cpufreq.h>
 #include <linux/ktime.h>
 #include <linux/pm_qos.h>
 #include <linux/tracepoint.h>
@@ -148,6 +149,30 @@ DEFINE_EVENT(cpu, cpu_frequency,
 	TP_ARGS(frequency, cpu_id)
 );
 
+TRACE_EVENT(cpu_frequency_limits,
+
+	TP_PROTO(struct cpufreq_policy *policy),
+
+	TP_ARGS(policy),
+
+	TP_STRUCT__entry(
+		__field(u32, min_freq)
+		__field(u32, max_freq)
+		__field(u32, cpu_id)
+	),
+
+	TP_fast_assign(
+		__entry->min_freq = policy->min;
+		__entry->max_freq = policy->max;
+		__entry->cpu_id = policy->cpu;
+	),
+
+	TP_printk("min=%lu max=%lu cpu_id=%lu",
+		  (unsigned long)__entry->min_freq,
+		  (unsigned long)__entry->max_freq,
+		  (unsigned long)__entry->cpu_id)
+);
+
 TRACE_EVENT(device_pm_callback_start,
 
 	TP_PROTO(struct device *dev, const char *pm_ops, int event),

kernel/cpu.c

@@ -291,6 +291,12 @@ void cpus_read_lock(void)
 }
 EXPORT_SYMBOL_GPL(cpus_read_lock);
 
+int cpus_read_trylock(void)
+{
+	return percpu_down_read_trylock(&cpu_hotplug_lock);
+}
+EXPORT_SYMBOL_GPL(cpus_read_trylock);
+
 void cpus_read_unlock(void)
 {
 	percpu_up_read(&cpu_hotplug_lock);

kernel/freezer.c

@@ -15,7 +15,9 @@
 atomic_t system_freezing_cnt = ATOMIC_INIT(0);
 EXPORT_SYMBOL(system_freezing_cnt);
 
-/* indicate whether PM freezing is in effect, protected by pm_mutex */
+/* indicate whether PM freezing is in effect, protected by
+ * system_transition_mutex
+ */
 bool pm_freezing;
 bool pm_nosig_freezing;
 

kernel/power/hibernate.c

@@ -338,7 +338,7 @@ static int create_image(int platform_mode)
  * hibernation_snapshot - Quiesce devices and create a hibernation image.
  * @platform_mode: If set, use platform driver to prepare for the transition.
  *
- * This routine must be called with pm_mutex held.
+ * This routine must be called with system_transition_mutex held.
  */
 int hibernation_snapshot(int platform_mode)
 {
@@ -500,8 +500,9 @@ static int resume_target_kernel(bool platform_mode)
  * hibernation_restore - Quiesce devices and restore from a hibernation image.
  * @platform_mode: If set, use platform driver to prepare for the transition.
  *
- * This routine must be called with pm_mutex held.  If it is successful, control
- * reappears in the restored target kernel in hibernation_snapshot().
+ * This routine must be called with system_transition_mutex held.  If it is
+ * successful, control reappears in the restored target kernel in
+ * hibernation_snapshot().
  */
 int hibernation_restore(int platform_mode)
 {
@@ -638,6 +639,7 @@ static void power_down(void)
 		break;
 	case HIBERNATION_PLATFORM:
 		hibernation_platform_enter();
+		/* Fall through */
 	case HIBERNATION_SHUTDOWN:
 		if (pm_power_off)
 			kernel_power_off();
@@ -805,13 +807,13 @@ static int software_resume(void)
 	 * name_to_dev_t() below takes a sysfs buffer mutex when sysfs
 	 * is configured into the kernel. Since the regular hibernate
 	 * trigger path is via sysfs which takes a buffer mutex before
-	 * calling hibernate functions (which take pm_mutex) this can
-	 * cause lockdep to complain about a possible ABBA deadlock
+	 * calling hibernate functions (which take system_transition_mutex)
+	 * this can cause lockdep to complain about a possible ABBA deadlock
 	 * which cannot happen since we're in the boot code here and
 	 * sysfs can't be invoked yet. Therefore, we use a subclass
 	 * here to avoid lockdep complaining.
 	 */
-	mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
+	mutex_lock_nested(&system_transition_mutex, SINGLE_DEPTH_NESTING);
 
 	if (swsusp_resume_device)
 		goto Check_image;
@@ -899,7 +901,7 @@ static int software_resume(void)
 	atomic_inc(&snapshot_device_available);
 	/* For success case, the suspend path will release the lock */
  Unlock:
-	mutex_unlock(&pm_mutex);
+	mutex_unlock(&system_transition_mutex);
 	pm_pr_dbg("Hibernation image not present or could not be loaded.\n");
 	return error;
  Close_Finish:

kernel/power/main.c

@@ -15,17 +15,16 @@
 #include <linux/workqueue.h>
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
+#include <linux/suspend.h>
 
 #include "power.h"
 
-DEFINE_MUTEX(pm_mutex);
-
 #ifdef CONFIG_PM_SLEEP
 
 void lock_system_sleep(void)
 {
 	current->flags |= PF_FREEZER_SKIP;
-	mutex_lock(&pm_mutex);
+	mutex_lock(&system_transition_mutex);
 }
 EXPORT_SYMBOL_GPL(lock_system_sleep);
 
@@ -37,8 +36,9 @@ void unlock_system_sleep(void)
 	 *
 	 * Reason:
 	 * Fundamentally, we just don't need it, because freezing condition
-	 * doesn't come into effect until we release the pm_mutex lock,
-	 * since the freezer always works with pm_mutex held.
+	 * doesn't come into effect until we release the
+	 * system_transition_mutex lock, since the freezer always works with
+	 * system_transition_mutex held.
 	 *
 	 * More importantly, in the case of hibernation,
 	 * unlock_system_sleep() gets called in snapshot_read() and
@@ -47,7 +47,7 @@ void unlock_system_sleep(void)
 	 * enter the refrigerator, thus causing hibernation to lockup.
 	 */
 	current->flags &= ~PF_FREEZER_SKIP;
-	mutex_unlock(&pm_mutex);
+	mutex_unlock(&system_transition_mutex);
 }
 EXPORT_SYMBOL_GPL(unlock_system_sleep);
 

kernel/power/suspend.c

@@ -556,7 +556,7 @@ static int enter_state(suspend_state_t state)
 	} else if (!valid_state(state)) {
 		return -EINVAL;
 	}
-	if (!mutex_trylock(&pm_mutex))
+	if (!mutex_trylock(&system_transition_mutex))
 		return -EBUSY;
 
 	if (state == PM_SUSPEND_TO_IDLE)
@@ -590,7 +590,7 @@ static int enter_state(suspend_state_t state)
 	pm_pr_dbg("Finishing wakeup.\n");
 	suspend_finish();
  Unlock:
-	mutex_unlock(&pm_mutex);
+	mutex_unlock(&system_transition_mutex);
 	return error;
 }
 

kernel/power/swap.c

@@ -923,7 +923,7 @@ int swsusp_write(unsigned int flags)
 	}
 	memset(&snapshot, 0, sizeof(struct snapshot_handle));
 	error = snapshot_read_next(&snapshot);
-	if (error < PAGE_SIZE) {
+	if (error < (int)PAGE_SIZE) {
 		if (error >= 0)
 			error = -EFAULT;
 
@@ -1483,7 +1483,7 @@ int swsusp_read(unsigned int *flags_p)
 
 	memset(&snapshot, 0, sizeof(struct snapshot_handle));
 	error = snapshot_write_next(&snapshot);
-	if (error < PAGE_SIZE)
+	if (error < (int)PAGE_SIZE)
 		return error < 0 ? error : -EFAULT;
 	header = (struct swsusp_info *)data_of(snapshot);
 	error = get_swap_reader(&handle, flags_p);

kernel/power/user.c

@@ -216,7 +216,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	if (!mutex_trylock(&pm_mutex))
+	if (!mutex_trylock(&system_transition_mutex))
 		return -EBUSY;
 
 	lock_device_hotplug();
@@ -394,7 +394,7 @@ static long snapshot_ioctl(struct file *filp, unsigned int cmd,
 	}
 
 	unlock_device_hotplug();
-	mutex_unlock(&pm_mutex);
+	mutex_unlock(&system_transition_mutex);
 
 	return error;
 }

kernel/reboot.c

@@ -294,7 +294,7 @@ void kernel_power_off(void)
 }
 EXPORT_SYMBOL_GPL(kernel_power_off);
 
-static DEFINE_MUTEX(reboot_mutex);
+DEFINE_MUTEX(system_transition_mutex);
 
 /*
  * Reboot system call: for obvious reasons only root may call it,
@@ -338,7 +338,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 	if ((cmd == LINUX_REBOOT_CMD_POWER_OFF) && !pm_power_off)
 		cmd = LINUX_REBOOT_CMD_HALT;
 
-	mutex_lock(&reboot_mutex);
+	mutex_lock(&system_transition_mutex);
 	switch (cmd) {
 	case LINUX_REBOOT_CMD_RESTART:
 		kernel_restart(NULL);
@@ -389,7 +389,7 @@ SYSCALL_DEFINE4(reboot, int, magic1, int, magic2, unsigned int, cmd,
 		ret = -EINVAL;
 		break;
 	}
-	mutex_unlock(&reboot_mutex);
+	mutex_unlock(&system_transition_mutex);
 	return ret;
 }
 

mm/page_alloc.c

@@ -155,16 +155,17 @@ static inline void set_pcppage_migratetype(struct page *page, int migratetype)
  * The following functions are used by the suspend/hibernate code to temporarily
  * change gfp_allowed_mask in order to avoid using I/O during memory allocations
  * while devices are suspended.  To avoid races with the suspend/hibernate code,
- * they should always be called with pm_mutex held (gfp_allowed_mask also should
- * only be modified with pm_mutex held, unless the suspend/hibernate code is
- * guaranteed not to run in parallel with that modification).
+ * they should always be called with system_transition_mutex held
+ * (gfp_allowed_mask also should only be modified with system_transition_mutex
+ * held, unless the suspend/hibernate code is guaranteed not to run in parallel
+ * with that modification).
  */
 
 static gfp_t saved_gfp_mask;
 
 void pm_restore_gfp_mask(void)
 {
-	WARN_ON(!mutex_is_locked(&pm_mutex));
+	WARN_ON(!mutex_is_locked(&system_transition_mutex));
 	if (saved_gfp_mask) {
 		gfp_allowed_mask = saved_gfp_mask;
 		saved_gfp_mask = 0;
@@ -173,7 +174,7 @@ void pm_restore_gfp_mask(void)
 
 void pm_restrict_gfp_mask(void)
 {
-	WARN_ON(!mutex_is_locked(&pm_mutex));
+	WARN_ON(!mutex_is_locked(&system_transition_mutex));
 	WARN_ON(saved_gfp_mask);
 	saved_gfp_mask = gfp_allowed_mask;
 	gfp_allowed_mask &= ~(__GFP_IO | __GFP_FS);