selftests: router_bridge_vlan_upper_pvid: Add a new selftest

This tests whether changes to PVID that coincide with an existing VLAN
upper throw off forwarding. This selftests is specifically geared towards
offloading drivers, but since there's nothing HW-specific in the test
itself (it absolutely is supposed to pass on SW datapath), it is put into
the generic forwarding directory.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tools/testing/selftests/net/forwarding/Makefile

@@ -65,6 +65,7 @@ TEST_PROGS = bridge_igmp.sh \
 	q_in_vni.sh \
 	router_bridge.sh \
 	router_bridge_vlan.sh \
+	router_bridge_vlan_upper_pvid.sh \
 	router_broadcast.sh \
 	router_mpath_nh_res.sh \
 	router_mpath_nh.sh \

tools/testing/selftests/net/forwarding/router_bridge_vlan_upper_pvid.sh

+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +----------------------------+
+# |                   H1 (vrf) |
+# |   + $h1.10                 |                      +----------------------+
+# |   | 192.0.2.1/28           |                      |             H2 (vrf) |
+# |   | 2001:db8:1::1/64       |                      |  + $h2               |
+# |   |                        |                      |  | 192.0.2.130/28    |
+# |   + $h1                    |                      |  | 2001:db8:2::2/64  |
+# +---|------------------------+                      +--|-------------------+
+#     |                                                  |
+# +---|--------------------------------------------------|-------------------+
+# |   |                            router (main VRF)     |                   |
+# | +-|--------------------------+                       + $swp2             |
+# | | + $swp1      BR1 (802.1q)  |                         192.0.2.129/28    |
+# | +-----+----------------------+                         2001:db8:2::1/64  |
+# |       |                                                                  |
+# |       + br1.10                                                           |
+# |         192.0.2.2/28                                                     |
+# |         2001:db8:1::2/64                                                 |
+# +--------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	pvid_set_unset
+	ping_ipv4
+	ping_ipv6
+	pvid_set_move
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 10 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	vlan_destroy $h1 10
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 address $(mac_get $swp1) \
+		type bridge vlan_filtering 1 vlan_default_pvid 0
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+
+	bridge vlan add dev br1 vid 10 self
+	bridge vlan add dev $swp1 vid 10
+	vlan_create br1 10 "" 192.0.2.2/28 2001:db8:1::2/64
+}
+
+router_destroy()
+{
+	vlan_destroy br1 10
+	bridge vlan del dev $swp1 vid 10
+	bridge vlan del dev br1 vid 10 self
+
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+pvid_set_unset()
+{
+	log_info "Set and unset PVID on VLAN 10"
+
+	bridge vlan add dev br1 vid 10 pvid self
+	sleep 1
+	bridge vlan add dev br1 vid 10 self
+}
+
+pvid_set_move()
+{
+	log_info "Set PVID on VLAN 10, then move it to VLAN 20"
+
+	bridge vlan add dev br1 vid 10 pvid self
+	sleep 1
+	bridge vlan add dev br1 vid 20 pvid self
+}
+
+shuffle_vlan()
+{
+	log_info ""
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS