drm/i915/dsc: split out encoder specific parts from DSC compute params

Split out the DP specific parts, making it easier to add DSI specific
configuration. Also move the encoder specific parts towards the end, to
allow overriding generic configuration if needed. This also improves
clarity by making it clear the encoder independent configuration does
not depend on the encoder specific parts.

v2: Rebase

Cc: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104141439.26312-3-jani.nikula@intel.com

drivers/gpu/drm/i915/display/intel_dp.c

@@ -2132,7 +2132,7 @@ static int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
 		}
 	}
 
-	ret = intel_dp_compute_dsc_params(intel_dp, pipe_config);
+	ret = intel_dsc_compute_params(&dig_port->base, pipe_config);
 	if (ret < 0) {
 		DRM_DEBUG_KMS("Cannot compute valid DSC parameters for Input Bpp = %d "
 			      "Compressed BPP = %d\n",

drivers/gpu/drm/i915/display/intel_vdsc.c

@@ -335,32 +335,14 @@ static const struct rc_parameters *get_rc_params(u16 compressed_bpp,
 	return &rc_parameters[row_index][column_index];
 }
 
-int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
-				struct intel_crtc_state *pipe_config)
+/* Values filled from DSC Sink DPCD */
+static int intel_dsc_dp_compute_params(struct intel_encoder *encoder,
+				       struct intel_crtc_state *pipe_config)
 {
+	struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
 	struct drm_dsc_config *vdsc_cfg = &pipe_config->dsc.config;
-	u16 compressed_bpp = pipe_config->dsc.compressed_bpp;
-	const struct rc_parameters *rc_params;
-	u8 i = 0;
-	u8 line_buf_depth = 0;
+	u8 line_buf_depth;
 
-	vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay;
-	vdsc_cfg->pic_height = pipe_config->hw.adjusted_mode.crtc_vdisplay;
-	vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
-					     pipe_config->dsc.slice_count);
-	/*
-	 * Slice Height of 8 works for all currently available panels. So start
-	 * with that if pic_height is an integral multiple of 8.
-	 * Eventually add logic to try multiple slice heights.
-	 */
-	if (vdsc_cfg->pic_height % 8 == 0)
-		vdsc_cfg->slice_height = 8;
-	else if (vdsc_cfg->pic_height % 4 == 0)
-		vdsc_cfg->slice_height = 4;
-	else
-		vdsc_cfg->slice_height = 2;
-
-	/* Values filled from DSC Sink DPCD */
 	vdsc_cfg->dsc_version_major =
 		(intel_dp->dsc_dpcd[DP_DSC_REV - DP_DSC_SUPPORT] &
 		 DP_DSC_MAJOR_MASK) >> DP_DSC_MAJOR_SHIFT;
@@ -377,6 +359,7 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
 		DRM_DEBUG_KMS("DSC Sink Line Buffer Depth invalid\n");
 		return -EINVAL;
 	}
+
 	if (vdsc_cfg->dsc_version_minor == 2)
 		vdsc_cfg->line_buf_depth = (line_buf_depth == DSC_1_2_MAX_LINEBUF_DEPTH_BITS) ?
 			DSC_1_2_MAX_LINEBUF_DEPTH_VAL : line_buf_depth;
@@ -384,13 +367,42 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
 		vdsc_cfg->line_buf_depth = (line_buf_depth > DSC_1_1_MAX_LINEBUF_DEPTH_BITS) ?
 			DSC_1_1_MAX_LINEBUF_DEPTH_BITS : line_buf_depth;
 
+	vdsc_cfg->block_pred_enable =
+			intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
+		DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
+
+	return 0;
+}
+
+int intel_dsc_compute_params(struct intel_encoder *encoder,
+			     struct intel_crtc_state *pipe_config)
+{
+	struct drm_dsc_config *vdsc_cfg = &pipe_config->dsc.config;
+	u16 compressed_bpp = pipe_config->dsc.compressed_bpp;
+	const struct rc_parameters *rc_params;
+	u8 i = 0;
+	int ret;
+
+	vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay;
+	vdsc_cfg->pic_height = pipe_config->hw.adjusted_mode.crtc_vdisplay;
+	vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
+					     pipe_config->dsc.slice_count);
+	/*
+	 * Slice Height of 8 works for all currently available panels. So start
+	 * with that if pic_height is an integral multiple of 8.
+	 * Eventually add logic to try multiple slice heights.
+	 */
+	if (vdsc_cfg->pic_height % 8 == 0)
+		vdsc_cfg->slice_height = 8;
+	else if (vdsc_cfg->pic_height % 4 == 0)
+		vdsc_cfg->slice_height = 4;
+	else
+		vdsc_cfg->slice_height = 2;
+
 	/* Gen 11 does not support YCbCr */
 	vdsc_cfg->simple_422 = false;
 	/* Gen 11 does not support VBR */
 	vdsc_cfg->vbr_enable = false;
-	vdsc_cfg->block_pred_enable =
-			intel_dp->dsc_dpcd[DP_DSC_BLK_PREDICTION_SUPPORT - DP_DSC_SUPPORT] &
-		DP_DSC_BLK_PREDICTION_IS_SUPPORTED;
 
 	/* Gen 11 only supports integral values of bpp */
 	vdsc_cfg->bits_per_pixel = compressed_bpp << 4;
@@ -458,6 +470,10 @@ int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
 	vdsc_cfg->initial_scale_value = (vdsc_cfg->rc_model_size << 3) /
 		(vdsc_cfg->rc_model_size - vdsc_cfg->initial_offset);
 
+	ret = intel_dsc_dp_compute_params(encoder, pipe_config);
+	if (ret)
+		return ret;
+
 	return drm_dsc_compute_rc_parameters(vdsc_cfg);
 }
 

drivers/gpu/drm/i915/display/intel_vdsc.h

@@ -8,13 +8,12 @@
 
 struct intel_encoder;
 struct intel_crtc_state;
-struct intel_dp;
 
 void intel_dsc_enable(struct intel_encoder *encoder,
 		      const struct intel_crtc_state *crtc_state);
 void intel_dsc_disable(const struct intel_crtc_state *crtc_state);
-int intel_dp_compute_dsc_params(struct intel_dp *intel_dp,
-				struct intel_crtc_state *pipe_config);
+int intel_dsc_compute_params(struct intel_encoder *encoder,
+			     struct intel_crtc_state *pipe_config);
 enum intel_display_power_domain
 intel_dsc_power_domain(const struct intel_crtc_state *crtc_state);