[PATCH] USB: Add B&B Electronics VID/PIDs to ftdi_sio

This patch adds VID/PIDs for a few FTDI-based USB serial devices
from B&B Electronics to the ftdi_sio driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

drivers/usb/serial/ftdi_sio.c

@@ -368,6 +368,9 @@ static struct usb_device_id id_table_8U232AM [] = {
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0, 0x3ff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0, 0x3ff) },
+	{ USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0, 0x3ff) },
 	{ }						/* Terminating entry */
 };
 
@@ -478,6 +481,9 @@ static struct usb_device_id id_table_FT232BM [] = {
 	{ USB_DEVICE_VER(INTREPID_VID, INTREPID_NEOVI_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FALCOM_VID, FALCOM_TWIST_PID, 0x400, 0xffff) },
 	{ USB_DEVICE_VER(FTDI_VID, FTDI_SUUNTO_SPORTS_PID, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(BANDB_VID, BANDB_USOTL4_PID, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(BANDB_VID, BANDB_USTL4_PID, 0x400, 0xffff) },
+	{ USB_DEVICE_VER(BANDB_VID, BANDB_USO9ML2_PID, 0x400, 0xffff) },
 	{ }						/* Terminating entry */
 };
 
@@ -595,6 +601,9 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
 	{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
+	{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
 	{ }						/* Terminating entry */
 };
 

drivers/usb/serial/ftdi_sio.h

@@ -225,6 +225,14 @@
  */
 #define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
 
+/*
+ * Definitions for B&B Electronics products.
+ */
+#define BANDB_VID		0x0856	/* B&B Electronics Vendor ID */
+#define BANDB_USOTL4_PID	0xAC01	/* USOTL4 Isolated RS-485 Converter */
+#define BANDB_USTL4_PID		0xAC02	/* USTL4 RS-485 Converter */
+#define BANDB_USO9ML2_PID	0xAC03	/* USO9ML2 Isolated RS-232 Converter */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */