Commit b0d0bb1b authored by Daniel Palmer's avatar Daniel Palmer Committed by Arnd Bergmann

ARM: mstar: Add Armv7 base dtsi

Adds initial dtsi for the base MStar/Sigmastar Armv7 SoCs.

These SoCs have very similar memory maps and this will avoid
duplicating nodes across multiple dtsis.
Signed-off-by: default avatarDaniel Palmer <daniel@0x0f.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 09220c57
......@@ -2140,6 +2140,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
W: http://linux-chenxing.org/
F: Documentation/devicetree/bindings/arm/mstar.yaml
F: arch/arm/boot/dts/mstar-v7.dtsi
F: arch/arm/mach-mstar/
ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
......
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (c) 2020 thingy.jp.
* Author: Daniel Palmer <daniel@thingy.jp>
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&gic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x0>;
};
};
arch_timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2)
| IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2)
| IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2)
| IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2)
| IRQ_TYPE_LEVEL_LOW)>;
/*
* we shouldn't need this but the vendor
* u-boot is broken
*/
clock-frequency = <6000000>;
};
soc: soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x16001000 0x16001000 0x00007000>,
<0x1f000000 0x1f000000 0x00400000>;
gic: interrupt-controller@16001000 {
compatible = "arm,cortex-a7-gic";
reg = <0x16001000 0x1000>,
<0x16002000 0x2000>,
<0x16004000 0x2000>,
<0x16006000 0x2000>;
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2)
| IRQ_TYPE_LEVEL_LOW)>;
};
riu: bus@1f000000 {
compatible = "simple-bus";
reg = <0x1f000000 0x00400000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x1f000000 0x00400000>;
l3bridge: l3bridge@204400 {
compatible = "mstar,l3bridge";
reg = <0x204400 0x200>;
};
pm_uart: uart@221000 {
compatible = "ns16550a";
reg = <0x221000 0x100>;
reg-shift = <3>;
clock-frequency = <172000000>;
status = "disabled";
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment