Commit b0e924a9 authored by Cristian Marussi's avatar Cristian Marussi Committed by Sudeep Holla

firmware: arm_scmi: Refactor xfer in-flight registration routines

Move the whole xfer in-flight registration process out of scmi_xfer_get
and while at that, split the sequence number selection steps from the
in-flight registration procedure itself.

No functional change.
Signed-off-by: default avatarCristian Marussi <cristian.marussi@arm.com>
Tested-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Tested-by: default avatarVincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230118121426.492864-2-cristian.marussi@arm.comSigned-off-by: default avatarSudeep Holla <sudeep.holla@arm.com>
parent 37b5be82
......@@ -411,8 +411,6 @@ static int scmi_xfer_token_set(struct scmi_xfers_info *minfo,
if (xfer_id != next_token)
atomic_add((int)(xfer_id - next_token), &transfer_last_id);
/* Set in-flight */
set_bit(xfer_id, minfo->xfer_alloc_table);
xfer->hdr.seq = (u16)xfer_id;
return 0;
......@@ -430,33 +428,77 @@ static inline void scmi_xfer_token_clear(struct scmi_xfers_info *minfo,
clear_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
}
/**
* scmi_xfer_inflight_register_unlocked - Register the xfer as in-flight
*
* @xfer: The xfer to register
* @minfo: Pointer to Tx/Rx Message management info based on channel type
*
* Note that this helper assumes that the xfer to be registered as in-flight
* had been built using an xfer sequence number which still corresponds to a
* free slot in the xfer_alloc_table.
*
* Context: Assumes to be called with @xfer_lock already acquired.
*/
static inline void
scmi_xfer_inflight_register_unlocked(struct scmi_xfer *xfer,
struct scmi_xfers_info *minfo)
{
/* Set in-flight */
set_bit(xfer->hdr.seq, minfo->xfer_alloc_table);
hash_add(minfo->pending_xfers, &xfer->node, xfer->hdr.seq);
xfer->pending = true;
}
/**
* scmi_xfer_pending_set - Pick a proper sequence number and mark the xfer
* as pending in-flight
*
* @xfer: The xfer to act upon
* @minfo: Pointer to Tx/Rx Message management info based on channel type
*
* Return: 0 on Success or error otherwise
*/
static inline int scmi_xfer_pending_set(struct scmi_xfer *xfer,
struct scmi_xfers_info *minfo)
{
int ret;
unsigned long flags;
spin_lock_irqsave(&minfo->xfer_lock, flags);
/* Set a new monotonic token as the xfer sequence number */
ret = scmi_xfer_token_set(minfo, xfer);
if (!ret)
scmi_xfer_inflight_register_unlocked(xfer, minfo);
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
return ret;
}
/**
* scmi_xfer_get() - Allocate one message
*
* @handle: Pointer to SCMI entity handle
* @minfo: Pointer to Tx/Rx Message management info based on channel type
* @set_pending: If true a monotonic token is picked and the xfer is added to
* the pending hash table.
*
* Helper function which is used by various message functions that are
* exposed to clients of this driver for allocating a message traffic event.
*
* Picks an xfer from the free list @free_xfers (if any available) and, if
* required, sets a monotonically increasing token and stores the inflight xfer
* into the @pending_xfers hashtable for later retrieval.
* Picks an xfer from the free list @free_xfers (if any available) and perform
* a basic initialization.
*
* Note that, at this point, still no sequence number is assigned to the
* allocated xfer, nor it is registered as a pending transaction.
*
* The successfully initialized xfer is refcounted.
*
* Context: Holds @xfer_lock while manipulating @xfer_alloc_table and
* @free_xfers.
* Context: Holds @xfer_lock while manipulating @free_xfers.
*
* Return: 0 if all went fine, else corresponding error.
* Return: An initialized xfer if all went fine, else pointer error.
*/
static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
struct scmi_xfers_info *minfo,
bool set_pending)
struct scmi_xfers_info *minfo)
{
int ret;
unsigned long flags;
struct scmi_xfer *xfer;
......@@ -476,25 +518,8 @@ static struct scmi_xfer *scmi_xfer_get(const struct scmi_handle *handle,
*/
xfer->transfer_id = atomic_inc_return(&transfer_last_id);
if (set_pending) {
/* Pick and set monotonic token */
ret = scmi_xfer_token_set(minfo, xfer);
if (!ret) {
hash_add(minfo->pending_xfers, &xfer->node,
xfer->hdr.seq);
xfer->pending = true;
} else {
dev_err(handle->dev,
"Failed to get monotonic token %d\n", ret);
hlist_add_head(&xfer->node, &minfo->free_xfers);
xfer = ERR_PTR(ret);
}
}
if (!IS_ERR(xfer)) {
refcount_set(&xfer->users, 1);
atomic_set(&xfer->busy, SCMI_XFER_FREE);
}
refcount_set(&xfer->users, 1);
atomic_set(&xfer->busy, SCMI_XFER_FREE);
spin_unlock_irqrestore(&minfo->xfer_lock, flags);
return xfer;
......@@ -752,7 +777,7 @@ static void scmi_handle_notification(struct scmi_chan_info *cinfo,
ktime_t ts;
ts = ktime_get_boottime();
xfer = scmi_xfer_get(cinfo->handle, minfo, false);
xfer = scmi_xfer_get(cinfo->handle, minfo);
if (IS_ERR(xfer)) {
dev_err(dev, "failed to get free message slot (%ld)\n",
PTR_ERR(xfer));
......@@ -1143,13 +1168,22 @@ static int xfer_get_init(const struct scmi_protocol_handle *ph,
tx_size > info->desc->max_msg_size)
return -ERANGE;
xfer = scmi_xfer_get(pi->handle, minfo, true);
xfer = scmi_xfer_get(pi->handle, minfo);
if (IS_ERR(xfer)) {
ret = PTR_ERR(xfer);
dev_err(dev, "failed to get free message slot(%d)\n", ret);
return ret;
}
/* Pick a sequence number and register this xfer as in-flight */
ret = scmi_xfer_pending_set(xfer, minfo);
if (ret) {
dev_err(pi->handle->dev,
"Failed to get monotonic token %d\n", ret);
__scmi_xfer_put(minfo, xfer);
return ret;
}
xfer->tx.len = tx_size;
xfer->rx.len = rx_size ? : info->desc->max_msg_size;
xfer->hdr.type = MSG_TYPE_COMMAND;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment