net: sunhme: output link status with a single print.

This driver currently prints the link status using four separate
printk calls, which these days gets presented to the user as four
distinct messages, not exactly ideal:

  [   32.582778] eth0: Link is up using
  [   32.582828] internal
  [   32.582837] transceiver at
  [   32.582888] 100Mb/s, Full Duplex.

Restructure the display_link_mode function to use a single netdev_info
call to present all this information as a single message, which is much
nicer:

  [   33.640143] hme 0000:00:01.1 eth0: Link is up using internal transceiver at 100Mb/s, Full Duplex.

The display_forced_link_mode function has a similar structure, so adjust
it in a similar fashion.
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/sun/sunhme.c

@@ -545,43 +545,24 @@ static int try_next_permutation(struct happy_meal *hp, void __iomem *tregs)
 
 static void display_link_mode(struct happy_meal *hp, void __iomem *tregs)
 {
-	printk(KERN_INFO "%s: Link is up using ", hp->dev->name);
-	if (hp->tcvr_type == external)
-		printk("external ");
-	else
-		printk("internal ");
-	printk("transceiver at ");
 	hp->sw_lpa = happy_meal_tcvr_read(hp, tregs, MII_LPA);
-	if (hp->sw_lpa & (LPA_100HALF | LPA_100FULL)) {
-		if (hp->sw_lpa & LPA_100FULL)
-			printk("100Mb/s, Full Duplex.\n");
-		else
-			printk("100Mb/s, Half Duplex.\n");
-	} else {
-		if (hp->sw_lpa & LPA_10FULL)
-			printk("10Mb/s, Full Duplex.\n");
-		else
-			printk("10Mb/s, Half Duplex.\n");
-	}
+
+	netdev_info(hp->dev,
+		    "Link is up using %s transceiver at %dMb/s, %s Duplex.\n",
+		    hp->tcvr_type == external ? "external" : "internal",
+		    hp->sw_lpa & (LPA_100HALF | LPA_100FULL) ? 100 : 10,
+		    hp->sw_lpa & (LPA_100FULL | LPA_10FULL) ? "Full" : "Half");
 }
 
 static void display_forced_link_mode(struct happy_meal *hp, void __iomem *tregs)
 {
-	printk(KERN_INFO "%s: Link has been forced up using ", hp->dev->name);
-	if (hp->tcvr_type == external)
-		printk("external ");
-	else
-		printk("internal ");
-	printk("transceiver at ");
 	hp->sw_bmcr = happy_meal_tcvr_read(hp, tregs, MII_BMCR);
-	if (hp->sw_bmcr & BMCR_SPEED100)
-		printk("100Mb/s, ");
-	else
-		printk("10Mb/s, ");
-	if (hp->sw_bmcr & BMCR_FULLDPLX)
-		printk("Full Duplex.\n");
-	else
-		printk("Half Duplex.\n");
+
+	netdev_info(hp->dev,
+		    "Link has been forced up using %s transceiver at %dMb/s, %s Duplex.\n",
+		    hp->tcvr_type == external ? "external" : "internal",
+		    hp->sw_bmcr & BMCR_SPEED100 ? 100 : 10,
+		    hp->sw_bmcr & BMCR_FULLDPLX ? "Full" : "Half");
 }
 
 static int set_happy_link_modes(struct happy_meal *hp, void __iomem *tregs)