Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals',...

Merge branches 'clk-imx6-video-parent', 'clk-qcom-sdm845-criticals', 'clk-renesas', 'clk-stratix10-fixes' and 'clk-atmel-i2s' into clk-next

* clk-imx6-video-parent:
  :  - Fix i.MX6QDL video clk parent
  clk: imx6: fix video_27m parent for IMX6QDL_CLK_CKO1_SEL

* clk-qcom-sdm845-criticals:
  :  - critical clk markings for qcom SDM845
  clk: qcom: Enable clocks which needs to be always on for SDM845

* clk-renesas:
  clk: renesas: Renesas R9A06G032 clock driver
  dt-bindings: clock: renesas,r9a06g032-sysctrl: documentation
  dt-bindings: clock: Add the r9a06g032-sysctrl.h file
  clk: renesas: r8a7795: Add CCREE clock
  clk: renesas: r8a7795: Add CR clock

* clk-stratix10-fixes:
  :  - Fix Stratix10 mpu_free_clk and sdmmc_free_clk parents
  clk: socfpga: stratix10: fix the sdmmc_free_clk mux
  clk: socfpga: stratix10: fix the parents of mpu_free_clk

* clk-atmel-i2s:
  :  - Atmel at91 I2S audio clk support
  clk: at91: add I2S clock mux driver
  dt-bindings: clk: at91: add an I2S mux clock

Documentation/devicetree/bindings/clock/at91-clock.txt

@@ -91,6 +91,9 @@ Required properties:
 		at91 audio pll output on AUDIOPLLCLK that feeds the PMC
 		and can be used by peripheral clock or generic clock
 
+	"atmel,sama5d2-clk-i2s-mux" (under pmc node):
+		at91 I2S clock source selection
+
 Required properties for SCKC node:
 - reg : defines the IO memory reserved for the SCKC.
 - #size-cells : shall be 0 (reg is used to encode clk id).
@@ -507,3 +510,35 @@ For example:
 			atmel,clk-output-range = <0 83000000>;
 		};
 	};
+
+Required properties for I2S mux clocks:
+- #size-cells : shall be 0 (reg is used to encode I2S bus id).
+- #address-cells : shall be 1 (reg is used to encode I2S bus id).
+- name: device tree node describing a specific mux clock.
+	* #clock-cells : from common clock binding; shall be set to 0.
+	* clocks : shall be the mux clock parent phandles; shall be 2 phandles:
+	  peripheral and generated clock; the first phandle shall belong to the
+	  peripheral clock and the second one shall belong to the generated
+	  clock; "clock-indices" property can be user to specify
+	  the correct order.
+	* reg: I2S bus id of the corresponding mux clock.
+	  e.g. reg = <0>; for i2s0, reg = <1>; for i2s1
+
+For example:
+	i2s_clkmux {
+		compatible = "atmel,sama5d2-clk-i2s-mux";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2s0muxck: i2s0_muxclk {
+			clocks = <&i2s0_clk>, <&i2s0_gclk>;
+			#clock-cells = <0>;
+			reg = <0>;
+		};
+
+		i2s1muxck: i2s1_muxclk {
+			clocks = <&i2s1_clk>, <&i2s1_gclk>;
+			#clock-cells = <0>;
+			reg = <1>;
+		};
+	};

Documentation/devicetree/bindings/clock/renesas,r9a06g032-sysctrl.txt

+* Renesas R9A06G032 SYSCTRL
+
+Required Properties:
+
+  - compatible: Must be:
+    - "renesas,r9a06g032-sysctrl"
+  - reg: Base address and length of the SYSCTRL IO block.
+  - #clock-cells: Must be 1
+  - clocks: References to the parent clocks:
+	- external 40mhz crystal.
+	- external (optional) 32.768khz
+	- external (optional) jtag input
+	- external (optional) RGMII_REFCLK
+  - clock-names: Must be:
+        clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+
+Examples
+--------
+
+  - SYSCTRL node:
+
+	sysctrl: system-controller@4000c000 {
+		compatible = "renesas,r9a06g032-sysctrl";
+		reg = <0x4000c000 0x1000>;
+		#clock-cells = <1>;
+
+		clocks = <&ext_mclk>, <&ext_rtc_clk>,
+				<&ext_jtag_clk>, <&ext_rgmii_ref>;
+		clock-names = "mclk", "rtc", "jtag", "rgmii_ref_ext";
+	};
+
+  - Other nodes can use the clocks provided by SYSCTRL as in:
+
+	#include <dt-bindings/clock/r9a06g032-sysctrl.h>
+	uart0: serial@40060000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x40060000 0x400>;
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		clocks = <&sysctrl R9A06G032_CLK_UART0>;
+		clock-names = "baudclk";
+	};

arch/arm/mach-at91/Kconfig

@@ -27,6 +27,7 @@ config SOC_SAMA5D2
 	select HAVE_AT91_H32MX
 	select HAVE_AT91_GENERATED_CLK
 	select HAVE_AT91_AUDIO_PLL
+	select HAVE_AT91_I2S_MUX_CLK
 	select PINCTRL_AT91PIO4
 	help
 	  Select this if ou are using one of Microchip's SAMA5D2 family SoC.
@@ -129,6 +130,9 @@ config HAVE_AT91_GENERATED_CLK
 config HAVE_AT91_AUDIO_PLL
 	bool
 
+config HAVE_AT91_I2S_MUX_CLK
+	bool
+
 config SOC_SAM_V4_V5
 	bool
 

drivers/clk/at91/Makefile

@@ -13,3 +13,4 @@ obj-$(CONFIG_HAVE_AT91_USB_CLK)		+= clk-usb.o
 obj-$(CONFIG_HAVE_AT91_SMD)		+= clk-smd.o
 obj-$(CONFIG_HAVE_AT91_H32MX)		+= clk-h32mx.o
 obj-$(CONFIG_HAVE_AT91_GENERATED_CLK)	+= clk-generated.o
+obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK)	+= clk-i2s-mux.o

drivers/clk/at91/clk-i2s-mux.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 2018 Microchip Technology Inc,
+ *                     Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+ *
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <soc/at91/atmel-sfr.h>
+
+#define	I2S_BUS_NR	2
+
+struct clk_i2s_mux {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u8 bus_id;
+};
+
+#define to_clk_i2s_mux(hw) container_of(hw, struct clk_i2s_mux, hw)
+
+static u8 clk_i2s_mux_get_parent(struct clk_hw *hw)
+{
+	struct clk_i2s_mux *mux = to_clk_i2s_mux(hw);
+	u32 val;
+
+	regmap_read(mux->regmap, AT91_SFR_I2SCLKSEL, &val);
+
+	return (val & BIT(mux->bus_id)) >> mux->bus_id;
+}
+
+static int clk_i2s_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_i2s_mux *mux = to_clk_i2s_mux(hw);
+
+	return regmap_update_bits(mux->regmap, AT91_SFR_I2SCLKSEL,
+				  BIT(mux->bus_id), index << mux->bus_id);
+}
+
+static const struct clk_ops clk_i2s_mux_ops = {
+	.get_parent = clk_i2s_mux_get_parent,
+	.set_parent = clk_i2s_mux_set_parent,
+	.determine_rate = __clk_mux_determine_rate,
+};
+
+static struct clk_hw * __init
+at91_clk_i2s_mux_register(struct regmap *regmap, const char *name,
+			  const char * const *parent_names,
+			  unsigned int num_parents, u8 bus_id)
+{
+	struct clk_init_data init = {};
+	struct clk_i2s_mux *i2s_ck;
+	int ret;
+
+	i2s_ck = kzalloc(sizeof(*i2s_ck), GFP_KERNEL);
+	if (!i2s_ck)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_i2s_mux_ops;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	i2s_ck->hw.init = &init;
+	i2s_ck->bus_id = bus_id;
+	i2s_ck->regmap = regmap;
+
+	ret = clk_hw_register(NULL, &i2s_ck->hw);
+	if (ret) {
+		kfree(i2s_ck);
+		return ERR_PTR(ret);
+	}
+
+	return &i2s_ck->hw;
+}
+
+static void __init of_sama5d2_clk_i2s_mux_setup(struct device_node *np)
+{
+	struct regmap *regmap_sfr;
+	u8 bus_id;
+	const char *parent_names[2];
+	struct device_node *i2s_mux_np;
+	struct clk_hw *hw;
+	int ret;
+
+	regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
+	if (IS_ERR(regmap_sfr))
+		return;
+
+	for_each_child_of_node(np, i2s_mux_np) {
+		if (of_property_read_u8(i2s_mux_np, "reg", &bus_id))
+			continue;
+
+		if (bus_id > I2S_BUS_NR)
+			continue;
+
+		ret = of_clk_parent_fill(i2s_mux_np, parent_names, 2);
+		if (ret != 2)
+			continue;
+
+		hw = at91_clk_i2s_mux_register(regmap_sfr, i2s_mux_np->name,
+					       parent_names, 2, bus_id);
+		if (IS_ERR(hw))
+			continue;
+
+		of_clk_add_hw_provider(i2s_mux_np, of_clk_hw_simple_get, hw);
+	}
+}
+
+CLK_OF_DECLARE(sama5d2_clk_i2s_mux, "atmel,sama5d2-clk-i2s-mux",
+	       of_sama5d2_clk_i2s_mux_setup);

drivers/clk/imx/clk-imx6q.c

@@ -65,7 +65,7 @@ static const char *ipg_per_sels[] = { "ipg", "osc", };
 static const char *ecspi_sels[] = { "pll3_60m", "osc", };
 static const char *can_sels[] = { "pll3_60m", "osc", "pll3_80m", };
 static const char *cko1_sels[]	= { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
-				    "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
+				    "video_27m", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
 				    "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio_div", };
 static const char *cko2_sels[] = {
 	"mmdc_ch0_axi", "mmdc_ch1_axi", "usdhc4", "usdhc1",

drivers/clk/qcom/gcc-sdm845.c

@@ -1103,6 +1103,7 @@ static struct clk_branch gcc_camera_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_camera_ahb_clk",
+			.flags = CLK_IS_CRITICAL,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1129,6 +1130,7 @@ static struct clk_branch gcc_camera_xo_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_camera_xo_clk",
+			.flags = CLK_IS_CRITICAL,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1270,6 +1272,7 @@ static struct clk_branch gcc_disp_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_disp_ahb_clk",
+			.flags = CLK_IS_CRITICAL,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1328,6 +1331,7 @@ static struct clk_branch gcc_disp_xo_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_disp_xo_clk",
+			.flags = CLK_IS_CRITICAL,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -1397,6 +1401,7 @@ static struct clk_branch gcc_gpu_cfg_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_gpu_cfg_ahb_clk",
+			.flags = CLK_IS_CRITICAL,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -2985,6 +2990,7 @@ static struct clk_branch gcc_video_ahb_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_video_ahb_clk",
+			.flags = CLK_IS_CRITICAL,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -3011,6 +3017,7 @@ static struct clk_branch gcc_video_xo_clk = {
 		.enable_mask = BIT(0),
 		.hw.init = &(struct clk_init_data){
 			.name = "gcc_video_xo_clk",
+			.flags = CLK_IS_CRITICAL,
 			.ops = &clk_branch2_ops,
 		},
 	},
@@ -3049,6 +3056,36 @@ static struct clk_branch gcc_vs_ctrl_clk = {
 	},
 };
 
+static struct clk_branch gcc_cpuss_dvm_bus_clk = {
+	.halt_reg = 0x48190,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x48190,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cpuss_dvm_bus_clk",
+			.flags = CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_cpuss_gnoc_clk = {
+	.halt_reg = 0x48004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.hwcg_reg = 0x48004,
+	.hwcg_bit = 1,
+	.clkr = {
+		.enable_reg = 0x52004,
+		.enable_mask = BIT(22),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_cpuss_gnoc_clk",
+			.flags = CLK_IS_CRITICAL,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc pcie_0_gdsc = {
 	.gdscr = 0x6b004,
 	.pd = {
@@ -3344,6 +3381,8 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
 	[GPLL0] = &gpll0.clkr,
 	[GPLL0_OUT_EVEN] = &gpll0_out_even.clkr,
 	[GPLL4] = &gpll4.clkr,
+	[GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
+	[GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
 };
 
 static const struct qcom_reset_map gcc_sdm845_resets[] = {
@@ -3433,10 +3472,6 @@ static int gcc_sdm845_probe(struct platform_device *pdev)
 	regmap_update_bits(regmap, 0x09ffc, 0x3, 0x3);
 	regmap_update_bits(regmap, 0x71028, 0x3, 0x3);
 
-	/* Enable CPUSS clocks */
-	regmap_update_bits(regmap, 0x48190, BIT(0), 0x1);
-	regmap_update_bits(regmap, 0x52004, BIT(22), 0x1);
-
 	return qcom_cc_really_probe(pdev, &gcc_sdm845_desc, regmap);
 }
 

drivers/clk/renesas/Kconfig

@@ -21,6 +21,7 @@ config CLK_RENESAS
 	select CLK_R8A77980 if ARCH_R8A77980
 	select CLK_R8A77990 if ARCH_R8A77990
 	select CLK_R8A77995 if ARCH_R8A77995
+	select CLK_R9A06G032 if ARCH_R9A06G032
 	select CLK_SH73A0 if ARCH_SH73A0
 
 if CLK_RENESAS
@@ -125,6 +126,11 @@ config CLK_R8A77995
 	bool "R-Car D3 clock support" if COMPILE_TEST
 	select CLK_RCAR_GEN3_CPG
 
+config CLK_R9A06G032
+	bool "Renesas R9A06G032 clock driver"
+	help
+	  This is a driver for R9A06G032 clocks
+
 config CLK_SH73A0
 	bool "SH-Mobile AG5 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP

drivers/clk/renesas/Makefile

@@ -20,6 +20,7 @@ obj-$(CONFIG_CLK_R8A77970)		+= r8a77970-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77980)		+= r8a77980-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77990)		+= r8a77990-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A77995)		+= r8a77995-cpg-mssr.o
+obj-$(CONFIG_CLK_R9A06G032)		+= r9a06g032-clocks.o
 obj-$(CONFIG_CLK_SH73A0)		+= clk-sh73a0.o
 
 # Family

drivers/clk/renesas/r8a7795-cpg-mssr.c

@@ -103,6 +103,7 @@ static struct cpg_core_clk r8a7795_core_clks[] __initdata = {
 	DEF_GEN3_SD("sd3",      R8A7795_CLK_SD3,   CLK_SDSRC,     0x26c),
 
 	DEF_FIXED("cl",         R8A7795_CLK_CL,    CLK_PLL1_DIV2, 48, 1),
+	DEF_FIXED("cr",         R8A7795_CLK_CR,    CLK_PLL1_DIV4,  2, 1),
 	DEF_FIXED("cp",         R8A7795_CLK_CP,    CLK_EXTAL,      2, 1),
 
 	DEF_DIV6P1("canfd",     R8A7795_CLK_CANFD, CLK_PLL1_DIV4, 0x244),
@@ -132,6 +133,7 @@ static struct mssr_mod_clk r8a7795_mod_clks[] __initdata = {
 	DEF_MOD("sys-dmac2",		 217,	R8A7795_CLK_S0D3),
 	DEF_MOD("sys-dmac1",		 218,	R8A7795_CLK_S0D3),
 	DEF_MOD("sys-dmac0",		 219,	R8A7795_CLK_S0D3),
+	DEF_MOD("sceg-pub",		 229,	R8A7795_CLK_CR),
 	DEF_MOD("cmt3",			 300,	R8A7795_CLK_R),
 	DEF_MOD("cmt2",			 301,	R8A7795_CLK_R),
 	DEF_MOD("cmt1",			 302,	R8A7795_CLK_R),

drivers/clk/socfpga/clk-s10.c

@@ -28,7 +28,7 @@ static const char * const emaca_free_mux[] = {"peri_emaca_clk", "boot_clk"};
 static const char * const emacb_free_mux[] = {"peri_emacb_clk", "boot_clk"};
 static const char * const emac_ptp_free_mux[] = {"peri_emac_ptp_clk", "boot_clk"};
 static const char * const gpio_db_free_mux[] = {"peri_gpio_db_clk", "boot_clk"};
-static const char * const sdmmc_free_mux[] = {"peri_sdmmc_clk", "boot_clk"};
+static const char * const sdmmc_free_mux[] = {"main_sdmmc_clk", "boot_clk"};
 static const char * const s2f_usr1_free_mux[] = {"peri_s2f_usr1_clk", "boot_clk"};
 static const char * const psi_ref_free_mux[] = {"peri_psi_ref_clk", "boot_clk"};
 static const char * const mpu_mux[] = { "mpu_free_clk", "boot_clk",};
@@ -37,6 +37,11 @@ static const char * const s2f_usr0_mux[] = {"f2s_free_clk", "boot_clk"};
 static const char * const emac_mux[] = {"emaca_free_clk", "emacb_free_clk"};
 static const char * const noc_mux[] = {"noc_free_clk", "boot_clk"};
 
+static const char * const mpu_free_mux[] = {"main_mpu_base_clk",
+					    "peri_mpu_base_clk",
+					    "osc1", "cb_intosc_hs_div2_clk",
+					    "f2s_free_clk"};
+
 /* clocks in AO (always on) controller */
 static const struct stratix10_pll_clock s10_pll_clks[] = {
 	{ STRATIX10_BOOT_CLK, "boot_clk", boot_mux, ARRAY_SIZE(boot_mux), 0,
@@ -57,7 +62,7 @@ static const struct stratix10_perip_c_clock s10_main_perip_c_clks[] = {
 };
 
 static const struct stratix10_perip_cnt_clock s10_main_perip_cnt_clks[] = {
-	{ STRATIX10_MPU_FREE_CLK, "mpu_free_clk", NULL, cntr_mux, ARRAY_SIZE(cntr_mux),
+	{ STRATIX10_MPU_FREE_CLK, "mpu_free_clk", NULL, mpu_free_mux, ARRAY_SIZE(mpu_free_mux),
 	   0, 0x48, 0, 0, 0},
 	{ STRATIX10_NOC_FREE_CLK, "noc_free_clk", NULL, noc_free_mux, ARRAY_SIZE(noc_free_mux),
 	  0, 0x4C, 0, 0, 0},

include/dt-bindings/clock/qcom,gcc-sdm845.h

@@ -192,6 +192,8 @@
 #define GCC_VS_CTRL_CLK_SRC					182
 #define GCC_VSENSOR_CLK_SRC					183
 #define GPLL4							184
+#define GCC_CPUSS_DVM_BUS_CLK					185
+#define GCC_CPUSS_GNOC_CLK					186
 
 /* GCC Resets */
 #define GCC_MMSS_BCR						0

include/dt-bindings/clock/r9a06g032-sysctrl.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * R9A06G032 sysctrl IDs
+ *
+ * Copyright (C) 2018 Renesas Electronics Europe Limited
+ *
+ * Michel Pollet <michel.pollet@bp.renesas.com>, <buserror@gmail.com>
+ */
+
+#ifndef __DT_BINDINGS_R9A06G032_SYSCTRL_H__
+#define __DT_BINDINGS_R9A06G032_SYSCTRL_H__
+
+#define R9A06G032_CLK_PLL_USB		1
+#define R9A06G032_CLK_48		1	/* AKA CLK_PLL_USB */
+#define R9A06G032_MSEBIS_CLK		3	/* AKA CLKOUT_D16 */
+#define R9A06G032_MSEBIM_CLK		3	/* AKA CLKOUT_D16 */
+#define R9A06G032_CLK_DDRPHY_PLLCLK	5	/* AKA CLKOUT_D1OR2 */
+#define R9A06G032_CLK50			6	/* AKA CLKOUT_D20 */
+#define R9A06G032_CLK25			7	/* AKA CLKOUT_D40 */
+#define R9A06G032_CLK125		9	/* AKA CLKOUT_D8 */
+#define R9A06G032_CLK_P5_PG1		17	/* AKA DIV_P5_PG */
+#define R9A06G032_CLK_REF_SYNC		21	/* AKA DIV_REF_SYNC */
+#define R9A06G032_CLK_25_PG4		26
+#define R9A06G032_CLK_25_PG5		27
+#define R9A06G032_CLK_25_PG6		28
+#define R9A06G032_CLK_25_PG7		29
+#define R9A06G032_CLK_25_PG8		30
+#define R9A06G032_CLK_ADC		31
+#define R9A06G032_CLK_ECAT100		32
+#define R9A06G032_CLK_HSR100		33
+#define R9A06G032_CLK_I2C0		34
+#define R9A06G032_CLK_I2C1		35
+#define R9A06G032_CLK_MII_REF		36
+#define R9A06G032_CLK_NAND		37
+#define R9A06G032_CLK_NOUSBP2_PG6	38
+#define R9A06G032_CLK_P1_PG2		39
+#define R9A06G032_CLK_P1_PG3		40
+#define R9A06G032_CLK_P1_PG4		41
+#define R9A06G032_CLK_P4_PG3		42
+#define R9A06G032_CLK_P4_PG4		43
+#define R9A06G032_CLK_P6_PG1		44
+#define R9A06G032_CLK_P6_PG2		45
+#define R9A06G032_CLK_P6_PG3		46
+#define R9A06G032_CLK_P6_PG4		47
+#define R9A06G032_CLK_PCI_USB		48
+#define R9A06G032_CLK_QSPI0		49
+#define R9A06G032_CLK_QSPI1		50
+#define R9A06G032_CLK_RGMII_REF		51
+#define R9A06G032_CLK_RMII_REF		52
+#define R9A06G032_CLK_SDIO0		53
+#define R9A06G032_CLK_SDIO1		54
+#define R9A06G032_CLK_SERCOS100		55
+#define R9A06G032_CLK_SLCD		56
+#define R9A06G032_CLK_SPI0		57
+#define R9A06G032_CLK_SPI1		58
+#define R9A06G032_CLK_SPI2		59
+#define R9A06G032_CLK_SPI3		60
+#define R9A06G032_CLK_SPI4		61
+#define R9A06G032_CLK_SPI5		62
+#define R9A06G032_CLK_SWITCH		63
+#define R9A06G032_HCLK_ECAT125		65
+#define R9A06G032_HCLK_PINCONFIG	66
+#define R9A06G032_HCLK_SERCOS		67
+#define R9A06G032_HCLK_SGPIO2		68
+#define R9A06G032_HCLK_SGPIO3		69
+#define R9A06G032_HCLK_SGPIO4		70
+#define R9A06G032_HCLK_TIMER0		71
+#define R9A06G032_HCLK_TIMER1		72
+#define R9A06G032_HCLK_USBF		73
+#define R9A06G032_HCLK_USBH		74
+#define R9A06G032_HCLK_USBPM		75
+#define R9A06G032_CLK_48_PG_F		76
+#define R9A06G032_CLK_48_PG4		77
+#define R9A06G032_CLK_DDRPHY_PCLK	81	/* AKA CLK_REF_SYNC_D4 */
+#define R9A06G032_CLK_FW		81	/* AKA CLK_REF_SYNC_D4 */
+#define R9A06G032_CLK_CRYPTO		81	/* AKA CLK_REF_SYNC_D4 */
+#define R9A06G032_CLK_A7MP		84	/* AKA DIV_CA7 */
+#define R9A06G032_HCLK_CAN0		85
+#define R9A06G032_HCLK_CAN1		86
+#define R9A06G032_HCLK_DELTASIGMA	87
+#define R9A06G032_HCLK_PWMPTO		88
+#define R9A06G032_HCLK_RSV		89
+#define R9A06G032_HCLK_SGPIO0		90
+#define R9A06G032_HCLK_SGPIO1		91
+#define R9A06G032_RTOS_MDC		92
+#define R9A06G032_CLK_CM3		93
+#define R9A06G032_CLK_DDRC		94
+#define R9A06G032_CLK_ECAT25		95
+#define R9A06G032_CLK_HSR50		96
+#define R9A06G032_CLK_HW_RTOS		97
+#define R9A06G032_CLK_SERCOS50		98
+#define R9A06G032_HCLK_ADC		99
+#define R9A06G032_HCLK_CM3		100
+#define R9A06G032_HCLK_CRYPTO_EIP150	101
+#define R9A06G032_HCLK_CRYPTO_EIP93	102
+#define R9A06G032_HCLK_DDRC		103
+#define R9A06G032_HCLK_DMA0		104
+#define R9A06G032_HCLK_DMA1		105
+#define R9A06G032_HCLK_GMAC0		106
+#define R9A06G032_HCLK_GMAC1		107
+#define R9A06G032_HCLK_GPIO0		108
+#define R9A06G032_HCLK_GPIO1		109
+#define R9A06G032_HCLK_GPIO2		110
+#define R9A06G032_HCLK_HSR		111
+#define R9A06G032_HCLK_I2C0		112
+#define R9A06G032_HCLK_I2C1		113
+#define R9A06G032_HCLK_LCD		114
+#define R9A06G032_HCLK_MSEBI_M		115
+#define R9A06G032_HCLK_MSEBI_S		116
+#define R9A06G032_HCLK_NAND		117
+#define R9A06G032_HCLK_PG_I		118
+#define R9A06G032_HCLK_PG19		119
+#define R9A06G032_HCLK_PG20		120
+#define R9A06G032_HCLK_PG3		121
+#define R9A06G032_HCLK_PG4		122
+#define R9A06G032_HCLK_QSPI0		123
+#define R9A06G032_HCLK_QSPI1		124
+#define R9A06G032_HCLK_ROM		125
+#define R9A06G032_HCLK_RTC		126
+#define R9A06G032_HCLK_SDIO0		127
+#define R9A06G032_HCLK_SDIO1		128
+#define R9A06G032_HCLK_SEMAP		129
+#define R9A06G032_HCLK_SPI0		130
+#define R9A06G032_HCLK_SPI1		131
+#define R9A06G032_HCLK_SPI2		132
+#define R9A06G032_HCLK_SPI3		133
+#define R9A06G032_HCLK_SPI4		134
+#define R9A06G032_HCLK_SPI5		135
+#define R9A06G032_HCLK_SWITCH		136
+#define R9A06G032_HCLK_SWITCH_RG	137
+#define R9A06G032_HCLK_UART0		138
+#define R9A06G032_HCLK_UART1		139
+#define R9A06G032_HCLK_UART2		140
+#define R9A06G032_HCLK_UART3		141
+#define R9A06G032_HCLK_UART4		142
+#define R9A06G032_HCLK_UART5		143
+#define R9A06G032_HCLK_UART6		144
+#define R9A06G032_HCLK_UART7		145
+#define R9A06G032_CLK_UART0		146
+#define R9A06G032_CLK_UART1		147
+#define R9A06G032_CLK_UART2		148
+#define R9A06G032_CLK_UART3		149
+#define R9A06G032_CLK_UART4		150
+#define R9A06G032_CLK_UART5		151
+#define R9A06G032_CLK_UART6		152
+#define R9A06G032_CLK_UART7		153
+
+#endif /* __DT_BINDINGS_R9A06G032_SYSCTRL_H__ */