dpaa2-eth: setup the of_node field of the device

When the DPNI object is connected to a DPMAC, setup the of_node to point
to the DTS device node of that specific MAC. This enables other drivers,
for example the DSA subsystem, to find the net_device by its device
node.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c

@@ -289,17 +289,15 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 
 	mac->if_link_type = mac->attr.link_type;
 
-	dpmac_node = dpaa2_mac_get_node(mac->attr.id);
+	dpmac_node = mac->of_node;
 	if (!dpmac_node) {
 		netdev_err(net_dev, "No dpmac@%d node found.\n", mac->attr.id);
 		return -ENODEV;
 	}
 
 	err = dpaa2_mac_get_if_mode(dpmac_node, mac->attr);
-	if (err < 0) {
-		err = -EINVAL;
-		goto err_put_node;
-	}
+	if (err < 0)
+		return -EINVAL;
 	mac->if_mode = err;
 
 	/* The MAC does not have the capability to add RGMII delays so
@@ -311,8 +309,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
 	     mac->if_mode == PHY_INTERFACE_MODE_RGMII_TXID)) {
 		netdev_err(net_dev, "RGMII delay not supported\n");
-		err = -EINVAL;
-		goto err_put_node;
+		return -EINVAL;
 	}
 
 	if ((mac->attr.link_type == DPMAC_LINK_TYPE_PHY &&
@@ -320,7 +317,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 	    mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE) {
 		err = dpaa2_pcs_create(mac, dpmac_node, mac->attr.id);
 		if (err)
-			goto err_put_node;
+			return err;
 	}
 
 	mac->phylink_config.dev = &net_dev->dev;
@@ -344,16 +341,12 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 		goto err_phylink_destroy;
 	}
 
-	of_node_put(dpmac_node);
-
 	return 0;
 
 err_phylink_destroy:
 	phylink_destroy(mac->phylink);
 err_pcs_destroy:
 	dpaa2_pcs_destroy(mac);
-err_put_node:
-	of_node_put(dpmac_node);
 
 	return err;
 }
@@ -388,6 +381,12 @@ int dpaa2_mac_open(struct dpaa2_mac *mac)
 		goto err_close_dpmac;
 	}
 
+	/* Find the device node representing the MAC device and link the device
+	 * behind the associated netdev to it.
+	 */
+	mac->of_node = dpaa2_mac_get_node(mac->attr.id);
+	net_dev->dev.of_node = mac->of_node;
+
 	return 0;
 
 err_close_dpmac:
@@ -400,6 +399,8 @@ void dpaa2_mac_close(struct dpaa2_mac *mac)
 	struct fsl_mc_device *dpmac_dev = mac->mc_dev;
 
 	dpmac_close(mac->mc_io, 0, dpmac_dev->mc_handle);
+	if (mac->of_node)
+		of_node_put(mac->of_node);
 }
 
 static char dpaa2_mac_ethtool_stats[][ETH_GSTRING_LEN] = {

drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h

@@ -24,6 +24,7 @@ struct dpaa2_mac {
 	phy_interface_t if_mode;
 	enum dpmac_link_type if_link_type;
 	struct lynx_pcs *pcs;
+	struct device_node *of_node;
 };
 
 bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,