Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon: (abituguru3) enable DMI probing feature on AW9D-MAX
  hwmon: (abituguru3) Cosmetic whitespace fixes
  hwmon: (adt7473) Fix voltage conversion routines
  hwmon: (lm90) Add support for the LM99 16 degree offset
  hwmon: (lm90) Fix handling of hysteresis value
  hwmon-vid: Add support for AMD family 10h CPUs
  hwmon: (w83781d) Fix linking when built-in

Documentation/hwmon/lm90

@@ -8,7 +8,7 @@ Supported chips:
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/pf/LM/LM90.html
   * National Semiconductor LM89
-    Prefix: 'lm99'
+    Prefix: 'lm89' (no auto-detection)
     Addresses scanned: I2C 0x4c and 0x4d
     Datasheet: Publicly available at the National Semiconductor website
                http://www.national.com/mpf/LM/LM89.html

drivers/hwmon/abituguru3.c

@@ -178,7 +178,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -200,7 +200,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM1",		26, 1, 1, 1, 0 },
 		{ "PWM2",		27, 1, 1, 1, 0 },
 		{ "PWM3",		28, 1, 1, 1, 0 },
@@ -229,7 +229,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -250,7 +250,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -342,7 +342,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM1",		26, 1, 1, 1, 0 },
 		{ "PWM2",		27, 1, 1, 1, 0 },
 		{ "PWM3",		28, 1, 1, 1, 0 },
@@ -371,7 +371,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "CPU Fan",		32, 2, 60, 1, 0 },
 		{ "NB Fan",		33, 2, 60, 1, 0 },
@@ -402,7 +402,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "AUX3 Fan",		36, 2, 60, 1, 0 },
 		{ NULL, 0, 0, 0, 0, 0 } }
 	},
-	{ 0x0016, NULL /* AW9D-MAX, need DMI string */, {
+	{ 0x0016, "AW9D-MAX       (Intel i975-ICH7)", {
 		{ "CPU Core",		 0, 0, 10, 1, 0 },
 		{ "DDR2",		 1, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		 2, 0, 10, 1, 0 },
@@ -416,7 +416,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM1",		26, 1, 1, 1, 0 },
 		{ "PWM2",		27, 1, 1, 1, 0 },
 		{ "PWM3",		28, 1, 1, 1, 0 },
@@ -446,7 +446,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "ATX +3.3V",		10, 0, 20, 1, 0 },
 		{ "ATX 5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		26, 1, 1, 1, 0 },
+		{ "System",		26, 1, 1, 1, 0 },
 		{ "PWM",		27, 1, 1, 1, 0 },
 		{ "CPU FAN",		32, 2, 60, 1, 0 },
 		{ "SYS FAN",		34, 2, 60, 1, 0 },
@@ -469,7 +469,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM Phase1",		26, 1, 1, 1, 0 },
 		{ "PWM Phase2",		27, 1, 1, 1, 0 },
 		{ "PWM Phase3",		28, 1, 1, 1, 0 },
@@ -487,7 +487,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "DDR2",		13, 0, 20, 1, 0 },
 		{ "DDR2 VTT",		14, 0, 10, 1, 0 },
 		{ "CPU VTT",		 3, 0, 20, 1, 0 },
-		{ "NB 1.2V ",		 4, 0, 10, 1, 0 },
+		{ "NB 1.2V",		 4, 0, 10, 1, 0 },
 		{ "SB 1.5V",		 6, 0, 10, 1, 0 },
 		{ "HyperTransport",	 5, 0, 10, 1, 0 },
 		{ "ATX +12V (24-Pin)",	12, 0, 60, 1, 0 },
@@ -496,7 +496,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "ATX +3.3V",		10, 0, 20, 1, 0 },
 		{ "ATX 5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
 		{ "PWM Phase1",		26, 1, 1, 1, 0 },
 		{ "PWM Phase2",		27, 1, 1, 1, 0 },
 		{ "PWM Phase3",		28, 1, 1, 1, 0 },
@@ -523,8 +523,8 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
 		{ "+3.3V",		10, 0, 20, 1, 0 },
 		{ "5VSB",		11, 0, 30, 1, 0 },
 		{ "CPU",		24, 1, 1, 1, 0 },
-		{ "System ",		25, 1, 1, 1, 0 },
-		{ "PWM ",		26, 1, 1, 1, 0 },
+		{ "System",		25, 1, 1, 1, 0 },
+		{ "PWM",		26, 1, 1, 1, 0 },
 		{ "PWM Phase2",		27, 1, 1, 1, 0 },
 		{ "PWM Phase3",		28, 1, 1, 1, 0 },
 		{ "PWM Phase4",		29, 1, 1, 1, 0 },
@@ -947,7 +947,7 @@ static int __devinit abituguru3_probe(struct platform_device *pdev)
 	if (!abituguru3_motherboards[i].dmi_name) {
 		printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was "
 			"not detected using DMI. Please send the output of "
-			"\"dmidecode\" to the abituguru3 maintainer"
+			"\"dmidecode\" to the abituguru3 maintainer "
 			"(see MAINTAINERS)\n");
 	}
 #endif

drivers/hwmon/adt7473.c

@@ -319,35 +319,24 @@ static struct adt7473_data *adt7473_update_device(struct device *dev)
 }
 
 /*
- * On this chip, voltages are given as a count of steps between a minimum
- * and maximum voltage, not a direct voltage.
+ * Conversions
  */
-static const int volt_convert_table[][2] = {
-	{2997, 3},
-	{4395, 4},
+
+/* IN are scaled acording to built-in resistors */
+static const int adt7473_scaling[] = {  /* .001 Volts */
+	2250, 3300
 };
+#define SCALE(val, from, to)	(((val) * (to) + ((from) / 2)) / (from))
 
 static int decode_volt(int volt_index, u8 raw)
 {
-	int cmax = volt_convert_table[volt_index][0];
-	int cmin = volt_convert_table[volt_index][1];
-	return ((raw * (cmax - cmin)) / 255) + cmin;
+	return SCALE(raw, 192, adt7473_scaling[volt_index]);
 }
 
 static u8 encode_volt(int volt_index, int cooked)
 {
-	int cmax = volt_convert_table[volt_index][0];
-	int cmin = volt_convert_table[volt_index][1];
-	u8 x;
-
-	if (cooked > cmax)
-		cooked = cmax;
-	else if (cooked < cmin)
-		cooked = cmin;
-
-	x = ((cooked - cmin) * 255) / (cmax - cmin);
-
-	return x;
+	int raw = SCALE(cooked, adt7473_scaling[volt_index], 192);
+	return SENSORS_LIMIT(raw, 0, 255);
 }
 
 static ssize_t show_volt_min(struct device *dev,

drivers/hwmon/hwmon-vid.c

@@ -180,6 +180,7 @@ static struct vrm_model vrm_models[] = {
 	{X86_VENDOR_AMD, 0x6, ANY, ANY, 90},		/* Athlon Duron etc */
 	{X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24},		/* Athlon 64, Opteron */
 	{X86_VENDOR_AMD, 0xF, ANY, ANY, 25},		/* NPT family 0Fh */
+	{X86_VENDOR_AMD, 0x10, ANY, ANY, 25},		/* NPT family 10h */
 	{X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13},		/* Pentium M (130 nm) */
 	{X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85},		/* Tualatin */
 	{X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13},		/* Pentium M (90 nm) */

drivers/hwmon/lm90.c

@@ -12,9 +12,9 @@
  * made by National Semiconductor. Both have an increased remote
  * temperature measurement accuracy (1 degree), and the LM99
  * additionally shifts remote temperatures (measured and limits) by 16
- * degrees, which allows for higher temperatures measurement. The
- * driver doesn't handle it since it can be done easily in user-space.
+ * degrees, which allows for higher temperatures measurement.
  * Note that there is no way to differentiate between both chips.
+ * When device is auto-detected, the driver will assume an LM99.
  *
  * This driver also supports the LM86, another sensor chip made by
  * National Semiconductor. It is exactly similar to the LM90 except it
@@ -169,8 +169,8 @@ static const struct i2c_device_id lm90_id[] = {
 	{ "adt7461", adt7461 },
 	{ "lm90", lm90 },
 	{ "lm86", lm86 },
-	{ "lm89", lm99 },
-	{ "lm99", lm99 },	/* Missing temperature offset */
+	{ "lm89", lm86 },
+	{ "lm99", lm99 },
 	{ "max6646", max6646 },
 	{ "max6647", max6646 },
 	{ "max6649", max6646 },
@@ -366,6 +366,10 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr,
 	else
 		temp = temp_from_s8(data->temp8[attr->index]);
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index == 3)
+		temp += 16000;
+
 	return sprintf(buf, "%d\n", temp);
 }
 
@@ -385,6 +389,10 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr,
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index == 3)
+		val -= 16000;
+
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
 		data->temp8[nr] = temp_to_u8_adt7461(data, val);
@@ -411,6 +419,10 @@ static ssize_t show_temp11(struct device *dev, struct device_attribute *devattr,
 	else
 		temp = temp_from_s16(data->temp11[attr->index]);
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 &&  attr->index <= 2)
+		temp += 16000;
+
 	return sprintf(buf, "%d\n", temp);
 }
 
@@ -432,6 +444,10 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr,
 	long val = simple_strtol(buf, NULL, 10);
 	int nr = attr->index;
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index <= 2)
+		val -= 16000;
+
 	mutex_lock(&data->update_lock);
 	if (data->kind == adt7461)
 		data->temp11[nr] = temp_to_u16_adt7461(data, val);
@@ -461,9 +477,15 @@ static ssize_t show_temphyst(struct device *dev, struct device_attribute *devatt
 
 	if (data->kind == adt7461)
 		temp = temp_from_u8_adt7461(data, data->temp8[attr->index]);
+	else if (data->kind == max6646)
+		temp = temp_from_u8(data->temp8[attr->index]);
 	else
 		temp = temp_from_s8(data->temp8[attr->index]);
 
+	/* +16 degrees offset for temp2 for the LM99 */
+	if (data->kind == lm99 && attr->index == 3)
+		temp += 16000;
+
 	return sprintf(buf, "%d\n", temp - temp_from_s8(data->temp_hyst));
 }
 
@@ -473,12 +495,19 @@ static ssize_t set_temphyst(struct device *dev, struct device_attribute *dummy,
 	struct i2c_client *client = to_i2c_client(dev);
 	struct lm90_data *data = i2c_get_clientdata(client);
 	long val = simple_strtol(buf, NULL, 10);
-	long hyst;
+	int temp;
 
 	mutex_lock(&data->update_lock);
-	hyst = temp_from_s8(data->temp8[2]) - val;
+	if (data->kind == adt7461)
+		temp = temp_from_u8_adt7461(data, data->temp8[2]);
+	else if (data->kind == max6646)
+		temp = temp_from_u8(data->temp8[2]);
+	else
+		temp = temp_from_s8(data->temp8[2]);
+
+	data->temp_hyst = hyst_to_reg(temp - val);
 	i2c_smbus_write_byte_data(client, LM90_REG_W_TCRIT_HYST,
-				  hyst_to_reg(hyst));
+				  data->temp_hyst);
 	mutex_unlock(&data->update_lock);
 	return count;
 }
@@ -682,6 +711,15 @@ static int lm90_detect(struct i2c_client *new_client, int kind,
 				} else
 				if ((chip_id & 0xF0) == 0x30) { /* LM89/LM99 */
 					kind = lm99;
+					dev_info(&adapter->dev,
+						 "Assuming LM99 chip at "
+						 "0x%02x\n", address);
+					dev_info(&adapter->dev,
+						 "If it is an LM89, pass "
+						 "force_lm86=%d,0x%02x when "
+						 "loading the lm90 driver\n",
+						 i2c_adapter_id(adapter),
+						 address);
 				} else
 				if (address == 0x4C
 				 && (chip_id & 0xF0) == 0x10) { /* LM86 */

drivers/hwmon/w83781d.c

@@ -1968,7 +1968,7 @@ w83781d_isa_register(void)
 	return res;
 }
 
-static void __exit
+static void
 w83781d_isa_unregister(void)
 {
 	if (pdev) {
@@ -2017,7 +2017,7 @@ w83781d_isa_register(void)
 	return 0;
 }
 
-static void __exit
+static void
 w83781d_isa_unregister(void)
 {
 }