Commit b20e3cfe authored by Dave Gordon's avatar Dave Gordon Committed by Chris Wilson

drm/i915: clarify PMINTRMSK/pm_intr_keep usage

No functional changes; just renaming a bit, tweaking a datatype,
prettifying layout, and adding comments, in particular in the
GuC setup code that touches this data.
Signed-off-by: default avatarDave Gordon <david.s.gordon@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1473711577-11454-2-git-send-email-david.s.gordon@intel.comReviewed-by: default avatarTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
parent b0876afd
......@@ -1184,6 +1184,7 @@ struct intel_gen6_power_mgmt {
bool interrupts_enabled;
u32 pm_iir;
/* PM interrupt bits that should never be masked */
u32 pm_intr_keep;
/* Frequencies are stored in potentially platform dependent multiples.
......
......@@ -371,7 +371,7 @@ void gen6_disable_rps_interrupts(struct drm_i915_private *dev_priv)
spin_lock_irq(&dev_priv->irq_lock);
dev_priv->rps.interrupts_enabled = false;
I915_WRITE(GEN6_PMINTRMSK, gen6_sanitize_rps_pm_mask(dev_priv, ~0));
I915_WRITE(GEN6_PMINTRMSK, gen6_sanitize_rps_pm_mask(dev_priv, ~0u));
__gen6_disable_pm_irq(dev_priv, dev_priv->pm_rps_events);
I915_WRITE(gen6_pm_ier(dev_priv), I915_READ(gen6_pm_ier(dev_priv)) &
......@@ -4500,7 +4500,7 @@ void intel_irq_init(struct drm_i915_private *dev_priv)
dev_priv->rps.pm_intr_keep |= GEN6_PM_RP_UP_EI_EXPIRED;
if (INTEL_INFO(dev_priv)->gen >= 8)
dev_priv->rps.pm_intr_keep |= GEN8_PMINTR_REDIRECT_TO_NON_DISP;
dev_priv->rps.pm_intr_keep |= GEN8_PMINTR_REDIRECT_TO_GUC;
INIT_DELAYED_WORK(&dev_priv->gpu_error.hangcheck_work,
i915_hangcheck_elapsed);
......
......@@ -7067,7 +7067,7 @@ enum {
#define VLV_RCEDATA _MMIO(0xA0BC)
#define GEN6_RC6pp_THRESHOLD _MMIO(0xA0C0)
#define GEN6_PMINTRMSK _MMIO(0xA168)
#define GEN8_PMINTR_REDIRECT_TO_NON_DISP (1<<31)
#define GEN8_PMINTR_REDIRECT_TO_GUC (1<<31)
#define GEN8_MISC_CTRL0 _MMIO(0xA180)
#define VLV_PWRDWNUPCTL _MMIO(0xA294)
#define GEN9_MEDIA_PG_IDLE_HYSTERESIS _MMIO(0xA0C4)
......
......@@ -134,13 +134,28 @@ static void direct_interrupts_to_guc(struct drm_i915_private *dev_priv)
I915_WRITE(GUC_WD_VECS_IER, ~irqs);
/*
* If GuC has routed PM interrupts to itself, don't keep it.
* and keep other interrupts those are unmasked by GuC.
*/
* The REDIRECT_TO_GUC bit of the PMINTRMSK register directs all
* (unmasked) PM interrupts to the GuC. All other bits of this
* register *disable* generation of a specific interrupt.
*
* 'pm_intr_keep' indicates bits that are NOT to be set when
* writing to the PM interrupt mask register, i.e. interrupts
* that must not be disabled.
*
* If the GuC is handling these interrupts, then we must not let
* the PM code disable ANY interrupt that the GuC is expecting.
* So for each ENABLED (0) bit in this register, we must SET the
* bit in pm_intr_keep so that it's left enabled for the GuC.
*
* OTOH the REDIRECT_TO_GUC bit is initially SET in pm_intr_keep
* (so interrupts go to the DISPLAY unit at first); but here we
* need to CLEAR that bit, which will result in the register bit
* being left SET!
*/
tmp = I915_READ(GEN6_PMINTRMSK);
if (tmp & GEN8_PMINTR_REDIRECT_TO_NON_DISP) {
dev_priv->rps.pm_intr_keep |= ~(tmp & ~GEN8_PMINTR_REDIRECT_TO_NON_DISP);
dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_NON_DISP;
if (tmp & GEN8_PMINTR_REDIRECT_TO_GUC) {
dev_priv->rps.pm_intr_keep |= ~tmp;
dev_priv->rps.pm_intr_keep &= ~GEN8_PMINTR_REDIRECT_TO_GUC;
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment