[MIPS] Malta: Resurrect MTD support for onboard flash.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/configs/malta_defconfig

@@ -644,7 +644,85 @@ CONFIG_CONNECTOR=m
 #
 # Memory Technology Devices (MTD)
 #
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
 
 #
 # Parallel port support

arch/mips/mips-boards/malta/Makefile

@@ -19,5 +19,5 @@
 # under Linux.
 #
 
-obj-y := malta_int.o malta_setup.o
+obj-y := malta_int.o malta_mtd.o malta_setup.o
 obj-$(CONFIG_SMP) += malta_smp.o

arch/mips/mips-boards/malta/malta_setup.c

@@ -21,13 +21,6 @@
 #include <linux/pci.h>
 #include <linux/screen_info.h>
 
-#ifdef CONFIG_MTD
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#endif
-
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
@@ -58,30 +51,6 @@ struct resource standard_io_resources[] = {
 	{ .name = "dma2", .start = 0xc0, .end = 0xdf, .flags = IORESOURCE_BUSY },
 };
 
-#ifdef CONFIG_MTD
-static struct mtd_partition malta_mtd_partitions[] = {
-	{
-		.name =		"YAMON",
-		.offset =	0x0,
-		.size =		0x100000,
-		.mask_flags =	MTD_WRITEABLE
-	},
-	{
-		.name =		"User FS",
-		.offset = 	0x100000,
-		.size =		0x2e0000
-	},
-	{
-		.name =		"Board Config",
-		.offset =	0x3e0000,
-		.size =		0x020000,
-		.mask_flags =	MTD_WRITEABLE
-	}
-};
-
-#define number_partitions	(sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition))
-#endif
-
 const char *get_system_type(void)
 {
 	return "MIPS Malta";
@@ -211,14 +180,6 @@ void __init plat_mem_setup(void)
 #endif
 #endif
 
-#ifdef CONFIG_MTD
-	/*
-	 * Support for MTD on Malta. Use the generic physmap driver
-	 */
-	physmap_configure(0x1e000000, 0x400000, 4, NULL);
-	physmap_set_partitions(malta_mtd_partitions, number_partitions);
-#endif
-
 	mips_reboot_setup();
 
 	board_time_init = mips_time_init;