staging: gdm72xx: Removed commented-out code

Signed-off-by: Michalis Pappas <mpappas@fastmail.fm>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/gdm72xx/gdm_qos.h

@@ -34,23 +34,6 @@
 #define	IEEE802_1QVLANID		0x10
 
 struct gdm_wimax_csr_s {
-	/*	union{
-		U16 all;
-		struct _CS_CLASSIFIER_RULE_ENABLE{
-			IPTypeOfService:1,
-			Protocol:1,
-			IPMaskedSrcAddress:1,
-			IPMaskedDstAddress:1,
-			ProtocolSrcPortRange:1,
-			ProtocolDstPortRange:1,
-			DstMacAddr:1,
-			SrcMacAddr:1,
-			Ethertype:1,
-			IEEE802_1DUserPriority:1,
-			IEEE802_1QVLANID:1,
-			Reserved:5;
-		} fields;
-	} */
 	BOOLEAN		enabled;
 	u32		SFID;
 	u8		qos_buf_count;

drivers/staging/gdm72xx/gdm_wimax.c

@@ -862,10 +862,6 @@ static void prepare_rx_complete(void *arg, void *data, int len)
 			netdev_err(nic->netdev,
 				   "get_prepared_info failed(%d)\n", ret);
 		gdm_wimax_rcv_with_cb(nic, prepare_rx_complete, nic);
-		#if 0
-		/* Re-prepare WiMax device */
-		gdm_wimax_prepare_device(nic->netdev);
-		#endif
 	}
 }
 

drivers/staging/gdm72xx/gdm_wimax.h

@@ -23,10 +23,6 @@
 
 #define DRIVER_VERSION		"3.2.3"
 
-/*#define ETH_P_IP	0x0800 */
-/*#define ETH_P_ARP	0x0806 */
-/*#define ETH_P_IPV6	0x86DD */
-
 #define H2L(x)		__cpu_to_le16(x)
 #define L2H(x)		__le16_to_cpu(x)
 #define DH2L(x)		__cpu_to_le32(x)
@@ -62,8 +58,6 @@ struct nic {
 
 };
 
-/*#define LOOPBACK_TEST */
-
 int register_wimax_device(struct phy_dev *phy_dev, struct device *pdev);
 int gdm_wimax_send_tx(struct sk_buff *skb, struct net_device *dev);
 void unregister_wimax_device(struct phy_dev *phy_dev);

drivers/staging/gdm72xx/usb_boot.c

@@ -169,14 +169,7 @@ int usb_boot(struct usb_device *usbdev, u16 pid)
 	memcpy(&hdr, firm->data, sizeof(hdr));
 
 	array_le32_to_cpu((u32 *)&hdr, 19);
-#if 0
-	if (hdr.magic_code != 0x10767fff) {
-		dev_err(&usbdev->dev, "Invalid magic code 0x%08x\n",
-			hdr.magic_code);
-		ret = -EINVAL;
-		goto out;
-	}
-#endif
+
 	if (hdr.count > MAX_IMG_CNT) {
 		dev_err(&usbdev->dev, "Too many images. %d\n", hdr.count);
 		ret = -EINVAL;
@@ -201,14 +194,6 @@ int usb_boot(struct usb_device *usbdev, u16 pid)
 		memcpy(&fw_info, firm->data + pos, sizeof(fw_info));
 
 		array_le32_to_cpu((u32 *)&fw_info, 8);
-#if 0
-		if ((fw_info.id & 0xfffff000) != 0x10767000) {
-			dev_err(&usbdev->dev, "Invalid FW id. 0x%08x\n",
-				fw_info.id);
-			ret = -EIO;
-			goto out;
-		}
-#endif
 
 		if ((fw_info.id & 0xffff) != pid)
 			continue;