Commit b2d92ac1 authored by Pascal van Leeuwen's avatar Pascal van Leeuwen Committed by Herbert Xu

crypto: inside-secure - Base RD fetchcount on actual RD FIFO size

This patch derives the result descriptor fetch count from the actual
FIFO size advertised by the hardware. Fetching result descriptors
one at a time is a performance bottleneck for small blocks, especially
on hardware with multiple pipes. Even moreso if the HW has few rings.
Signed-off-by: default avatarPascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent 35c0e6c3
......@@ -357,13 +357,22 @@ static int safexcel_hw_setup_cdesc_rings(struct safexcel_crypto_priv *priv)
static int safexcel_hw_setup_rdesc_rings(struct safexcel_crypto_priv *priv)
{
u32 hdw, rd_size_rnd, val;
int i;
hdw = readl(EIP197_HIA_AIC_G(priv) + EIP197_HIA_OPTIONS);
hdw &= GENMASK(27, 25);
hdw >>= 25;
int i, rd_fetch_cnt;
rd_size_rnd = (priv->config.rd_size + (BIT(hdw) - 1)) >> hdw;
/* determine number of RD's we can fetch into the FIFO as one block */
rd_size_rnd = (EIP197_RD64_FETCH_SIZE +
BIT(priv->hwconfig.hwdataw) - 1) >>
priv->hwconfig.hwdataw;
if (priv->flags & SAFEXCEL_HW_EIP197) {
/* EIP197: try to fetch enough in 1 go to keep all pipes busy */
rd_fetch_cnt = (1 << priv->hwconfig.hwrfsize) / rd_size_rnd;
rd_fetch_cnt = min_t(uint, rd_fetch_cnt,
(priv->config.pes * EIP197_FETCH_DEPTH));
} else {
/* for the EIP97, just fetch all that fits minus 1 */
rd_fetch_cnt = ((1 << priv->hwconfig.hwrfsize) /
rd_size_rnd) - 1;
}
for (i = 0; i < priv->config.rings; i++) {
/* ring base address */
......@@ -376,8 +385,8 @@ static int safexcel_hw_setup_rdesc_rings(struct safexcel_crypto_priv *priv)
priv->config.rd_size,
EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_DESC_SIZE);
writel(((EIP197_FETCH_COUNT * (rd_size_rnd << hdw)) << 16) |
(EIP197_FETCH_COUNT * priv->config.rd_offset),
writel(((rd_fetch_cnt * (rd_size_rnd << hdw)) << 16) |
(rd_fetch_cnt * priv->config.rd_offset),
EIP197_HIA_RDR(priv, i) + EIP197_HIA_xDR_CFG);
/* Configure DMA tx control */
......@@ -1244,12 +1253,17 @@ static int safexcel_probe_generic(void *pdev,
priv->hwconfig.hwcfsize = ((hiaopt >> EIP197_CFSIZE_OFFSET) &
EIP197_CFSIZE_MASK) +
EIP197_CFSIZE_ADJUST;
priv->hwconfig.hwrfsize = ((hiaopt >> EIP197_RFSIZE_OFFSET) &
EIP197_RFSIZE_MASK) +
EIP197_RFSIZE_ADJUST;
} else {
/* EIP97 */
priv->hwconfig.hwdataw = (hiaopt >> EIP197_HWDATAW_OFFSET) &
EIP97_HWDATAW_MASK;
priv->hwconfig.hwcfsize = (hiaopt >> EIP97_CFSIZE_OFFSET) &
EIP97_CFSIZE_MASK;
priv->hwconfig.hwrfsize = (hiaopt >> EIP97_RFSIZE_OFFSET) &
EIP97_RFSIZE_MASK;
}
/* Get supported algorithms from EIP96 transform engine */
......@@ -1257,10 +1271,11 @@ static int safexcel_probe_generic(void *pdev,
EIP197_PE_EIP96_OPTIONS(0));
/* Print single info line describing what we just detected */
dev_info(priv->dev, "EIP%d:%x(%d)-HIA:%x(%d,%d),PE:%x,alg:%08x\n", peid,
priv->hwconfig.hwver, hwctg, priv->hwconfig.hiaver,
dev_info(priv->dev, "EIP%d:%x(%d)-HIA:%x(%d,%d,%d),PE:%x,alg:%08x\n",
peid, priv->hwconfig.hwver, hwctg, priv->hwconfig.hiaver,
priv->hwconfig.hwdataw, priv->hwconfig.hwcfsize,
priv->hwconfig.pever, priv->hwconfig.algo_flags);
priv->hwconfig.hwrfsize, priv->hwconfig.pever,
priv->hwconfig.algo_flags);
safexcel_configure(priv);
......
......@@ -30,7 +30,6 @@
#define EIP197_DEFAULT_RING_SIZE 400
#define EIP197_MAX_TOKENS 18
#define EIP197_MAX_RINGS 4
#define EIP197_FETCH_COUNT 1
#define EIP197_FETCH_DEPTH 2
#define EIP197_MAX_BATCH_SZ 64
......@@ -234,6 +233,11 @@
#define EIP97_CFSIZE_OFFSET 8
#define EIP197_CFSIZE_MASK GENMASK(3, 0)
#define EIP97_CFSIZE_MASK GENMASK(4, 0)
#define EIP197_RFSIZE_OFFSET 12
#define EIP197_RFSIZE_ADJUST 4
#define EIP97_RFSIZE_OFFSET 12
#define EIP197_RFSIZE_MASK GENMASK(3, 0)
#define EIP97_RFSIZE_MASK GENMASK(4, 0)
/* EIP197_HIA_AIC_R_ENABLE_CTRL */
#define EIP197_CDR_IRQ(n) BIT((n) * 2)
......@@ -462,6 +466,14 @@ struct safexcel_result_desc {
struct result_data_desc result_data;
} __packed;
/*
* The EIP(1)97 only needs to fetch the descriptor part of
* the result descriptor, not the result token part!
*/
#define EIP197_RD64_FETCH_SIZE ((sizeof(struct safexcel_result_desc) -\
sizeof(struct result_data_desc)) /\
sizeof(u32))
struct safexcel_token {
u32 packet_length:17;
u8 stat:2;
......@@ -691,6 +703,7 @@ struct safexcel_hwconfig {
int pever;
int hwdataw;
int hwcfsize;
int hwrfsize;
};
struct safexcel_crypto_priv {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment