Commit b33d46c3 authored by Ulf Hansson's avatar Ulf Hansson Committed by Chris Ball

mmc: core: reset card voltage after power off

At power off, reset OCR mask to be the highest possible voltage
supported for the current mmc host.

This solves the re-initialization during the power up sequence.
The voltage may have been decreased due to the card accepts a lower
voltage than the voltage used during the initialization sequence.
We need to reset the voltage to by the host highest possible value
since according to specification the initialization must always be
done at high voltage.
Reviewed-by: default avatarJonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent ab1efd27
...@@ -1009,6 +1009,13 @@ static void mmc_power_off(struct mmc_host *host) ...@@ -1009,6 +1009,13 @@ static void mmc_power_off(struct mmc_host *host)
{ {
host->ios.clock = 0; host->ios.clock = 0;
host->ios.vdd = 0; host->ios.vdd = 0;
/*
* Reset ocr mask to be the highest possible voltage supported for
* this mmc host. This value will be used at next power up.
*/
host->ocr = 1 << (fls(host->ocr_avail) - 1);
if (!mmc_host_is_spi(host)) { if (!mmc_host_is_spi(host)) {
host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN; host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
host->ios.chip_select = MMC_CS_DONTCARE; host->ios.chip_select = MMC_CS_DONTCARE;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment