bnx2x: Do interrupt mode initialization and NAPIs adding before register_netdev()

Move the interrupt mode configuration and NAPIs adding before a
register_netdev() call to prevent netdev->open() from running
before these functions are done.

Advance a driver version number.
Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Reported-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/bnx2x/bnx2x.h

@@ -20,8 +20,8 @@
  * (you will need to reboot afterwards) */
 /* #define BNX2X_STOP_ON_ERROR */
 
-#define DRV_MODULE_VERSION      "1.60.00-4"
-#define DRV_MODULE_RELDATE      "2010/11/01"
+#define DRV_MODULE_VERSION      "1.60.00-5"
+#define DRV_MODULE_RELDATE      "2010/11/24"
 #define BNX2X_BC_VER            0x040200
 
 #define BNX2X_MULTI_QUEUE

drivers/net/bnx2x/bnx2x_main.c

@@ -9096,12 +9096,6 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	/* calc qm_cid_count */
 	bp->qm_cid_count = bnx2x_set_qm_cid_count(bp, cid_count);
 
-	rc = register_netdev(dev);
-	if (rc) {
-		dev_err(&pdev->dev, "Cannot register net device\n");
-		goto init_one_exit;
-	}
-
 	/* Configure interupt mode: try to enable MSI-X/MSI if
 	 * needed, set bp->num_queues appropriately.
 	 */
@@ -9110,6 +9104,12 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 	/* Add all NAPI objects */
 	bnx2x_add_all_napi(bp);
 
+	rc = register_netdev(dev);
+	if (rc) {
+		dev_err(&pdev->dev, "Cannot register net device\n");
+		goto init_one_exit;
+	}
+
 	bnx2x_get_pcie_width_speed(bp, &pcie_width, &pcie_speed);
 
 	netdev_info(dev, "%s (%c%d) PCI-E x%d %s found at mem %lx,"