Merge tag 'uniphier-dt64-v4.16' of...

Merge tag 'uniphier-dt64-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM64 SoC DT updates for v4.16

- clean up gpios properties by macro
- add GPIO hog for PXs3 reference node
- add has-transaction-translator property to generic-ehci nodes
- enable more serial ports for PXs3 reference node

* tag 'uniphier-dt64-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: enable more serial ports for PXs3 ref board
  arm64: dts: uniphier: add has-transaction-translator property to usb node for LD11
  arm64: dts: uniphier: add GPIO hog definition for PXs3
  arm64: dts: uniphier: use macros in dt-bindings header
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts

@@ -50,7 +50,7 @@ &serial0 {
 &gpio {
 	xirq0 {
 		gpio-hog;
-		gpios = <120 0>;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
 	};
 };

arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi

@@ -8,6 +8,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
 
 /memreserve/ 0x80000000 0x02000000;
 
@@ -100,7 +101,7 @@ refclk: ref {
 
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
 	};
 
 	timer {
@@ -347,6 +348,7 @@ usb0: usb@5a800100 {
 				 <&mio_clk 12>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
 				 <&mio_rst 12>;
+			has-transaction-translator;
 		};
 
 		usb1: usb@5a810100 {
@@ -360,6 +362,7 @@ usb1: usb@5a810100 {
 				 <&mio_clk 13>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
 				 <&mio_rst 13>;
+			has-transaction-translator;
 		};
 
 		usb2: usb@5a820100 {
@@ -373,6 +376,7 @@ usb2: usb@5a820100 {
 				 <&mio_clk 14>;
 			resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
 				 <&mio_rst 14>;
+			has-transaction-translator;
 		};
 
 		mioctrl@5b3e0000 {

arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts

@@ -50,7 +50,7 @@ &serial0 {
 &gpio {
 	xirq0 {
 		gpio-hog;
-		gpios = <120 0>;
+		gpios = <UNIPHIER_GPIO_IRQ(0) 0>;
 		input;
 	};
 };

arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi

@@ -8,6 +8,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
 #include <dt-bindings/thermal/thermal.h>
 
 /memreserve/ 0x80000000 0x02000000;
@@ -172,7 +173,7 @@ refclk: ref {
 
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
 	};
 
 	timer {

arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts

@@ -45,6 +45,22 @@ &serial0 {
 	status = "okay";
 };
 
+&serial2 {
+	status = "okay";
+};
+
+&serial3 {
+	status = "okay";
+};
+
+&gpio {
+	xirq4 {
+		gpio-hog;
+		gpios = <UNIPHIER_GPIO_IRQ(4) 0>;
+		input;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 };

arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi

@@ -8,6 +8,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/gpio/uniphier-gpio.h>
 
 /memreserve/ 0x80000000 0x02000000;
 
@@ -128,7 +129,7 @@ refclk: ref {
 
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio UNIPHIER_GPIO_PORT(5, 7) GPIO_ACTIVE_LOW>;
 	};
 
 	timer {