Merge tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt fixes from Greg KH:
 "Here are some tiny USB and Thunderbolt driver fixes and quirks.

  Included in here are:

   - three uas/usb-storage driver quirks to get the devices working
     properly due to broken firmware images in them (they can not run at
     high data rates, and are also throttled on other operating systems
     because of this)

   - thunderbolt bugfix for plug event delays

   - typec runtime warning removal

   - dwc3 st driver bugfix. Note, a follow-on fix for this will end up
     coming in for 6.1-rc1 as the developers are still arguing over what
     the final solution will be, but this should be sufficient for now

  All of these have been in linux-next with no reported problems"

* tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  uas: ignore UAS for Thinkplus chips
  usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
  uas: add no-uas quirk for Hiksemi usb_disk
  usb: dwc3: st: Fix node's child name
  usb: typec: ucsi: Remove incorrect warning
  thunderbolt: Explicitly reset plug events delay back to USB4 spec value

drivers/thunderbolt/switch.c

@@ -2413,6 +2413,7 @@ int tb_switch_configure(struct tb_switch *sw)
 		 * additional capabilities.
 		 */
 		sw->config.cmuv = USB4_VERSION_1_0;
+		sw->config.plug_events_delay = 0xa;
 
 		/* Enumerate the switch */
 		ret = tb_sw_write(sw, (u32 *)&sw->config + 1, TB_CFG_SWITCH,

drivers/usb/dwc3/dwc3-st.c

@@ -251,7 +251,7 @@ static int st_dwc3_probe(struct platform_device *pdev)
 	/* Manage SoftReset */
 	reset_control_deassert(dwc3_data->rstc_rst);
 
-	child = of_get_child_by_name(node, "dwc3");
+	child = of_get_child_by_name(node, "usb");
 	if (!child) {
 		dev_err(&pdev->dev, "failed to find dwc3 core node\n");
 		ret = -ENODEV;

drivers/usb/storage/unusual_uas.h

@@ -52,6 +52,13 @@ UNUSUAL_DEV(0x059f, 0x1061, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_OPCODES | US_FL_NO_SAME),
 
+/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
+UNUSUAL_DEV(0x090c, 0x2000, 0x0000, 0x9999,
+		"Hiksemi",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 /*
  * Apricorn USB3 dongle sometimes returns "USBSUSBSUSBS" in response to SCSI
  * commands in UAS mode.  Observed with the 1.28 firmware; are there others?
@@ -76,6 +83,13 @@ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_REPORT_LUNS),
 
+/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
+UNUSUAL_DEV(0x0bda, 0x9210, 0x0000, 0x9999,
+		"Hiksemi",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 /* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
 UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
 		"Initio Corporation",
@@ -118,6 +132,13 @@ UNUSUAL_DEV(0x154b, 0xf00d, 0x0000, 0x9999,
 		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
 		US_FL_NO_ATA_1X),
 
+/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
+UNUSUAL_DEV(0x17ef, 0x3899, 0x0000, 0x9999,
+		"Thinkplus",
+		"External HDD",
+		USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+		US_FL_IGNORE_UAS),
+
 /* Reported-by: Hans de Goede <hdegoede@redhat.com> */
 UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
 		"VIA",

drivers/usb/typec/ucsi/ucsi.c

@@ -588,8 +588,6 @@ static int ucsi_get_pdos(struct ucsi_connector *con, int is_partner,
 				num_pdos * sizeof(u32));
 	if (ret < 0 && ret != -ETIMEDOUT)
 		dev_err(ucsi->dev, "UCSI_GET_PDOS failed (%d)\n", ret);
-	if (ret == 0 && offset == 0)
-		dev_warn(ucsi->dev, "UCSI_GET_PDOS returned 0 bytes\n");
 
 	return ret;
 }