ice: Fix not stopping Tx queues for VFs
When a VF is removed and/or reset its Tx queues need to be stopped from the PF. This is done by calling the ice_dis_vf_qs() function, which calls ice_vsi_stop_lan_tx_rings(). Currently ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA. Unfortunately, this is causing the Tx queues to not be disabled in some cases and when the VF tries to re-enable/reconfigure its Tx queues over virtchnl the op is failing. This is because a VF can be reset and/or removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues were already configured via ice_vsi_cfg_single_txq() in the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. This was causing the following error message when loading the ice driver, creating VFs, and modifying VF trust in an endless loop: [35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM [35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5 [35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6 Fix this by always calling ice_dis_vf_qs() and silencing the error message in ice_vsi_stop_tx_ring() since the calling code ignores the return anyway. Also, all other places that call ice_vsi_stop_tx_ring() catch the error, so this doesn't affect those flows since there was no change to the values the function returns. Other solutions were considered (i.e. tracking which VF queues had been "started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed more complicated than it was worth. This solution also brings in the chance for other unexpected conditions due to invalid state bit checks. So, the proposed solution seemed like the best option since there is no harm in failing to stop Tx queues that were never started. This issue can be seen using the following commands: for i in {0..50}; do rmmod ice modprobe ice sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on sleep 2 echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on done Fixes: 77ca27c4 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Showing
Please register or sign in to comment